Welcome.



Top Sellers

  Drive Shaft Bushings Motor Mount Inserts Shifter Base Bushings Engine Mount Kits Short Shifter  



Torque Solution Billet Aluminum Engine Mount Combo: Dodge Neon SRT-4 Torque Solution Short Billet Antenna : Mitsubishi Lancer Sportback 2008-11
MSRP$203.50
MSRP$23.99
Dodge Neon SRT-4 Engine Mount Combo Kit Mitsubishi Lancer Sportback short Billet Antenna
Torque Solution Engine Mounts
Applications: Dodge Neon Srt-4 2000-2005

 
These engine mounts replace the OEM top and lower engine mounts. This combination will reduce 90% of wheel hop and engine movement to improve shifting, traction, and prevent damage to the intercooler hoses and exhaust systems due to excessive engine movement. These mounts have less vibrations when compared too the other aftermarket mounts. Take a look at the amount of urethane we use on each mount. We use 50% more urethane then all out competitors. These are the same mounts in the fastest world challenge Neon SRT-4's in the world.
 
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Life Time Warranty

Torque Solution Short Antanna
Applications: Mitsubishi Lancer Sportback 2008-2011


Replace your long factory antenna with our billet short antenna,Giving you a new style to your car.


- 3 inch Tall
- Installs in under 2 minutes
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized

Torque Solution Thermal Intake Manifold Gasket: Honda Civic Si 2006-2009 Torque Solution Billet Aluminum Front Engine Mount: Mitsubishi Evolution X 2008-2015
MSRP$39.99
MSRP$109.99
Torque Solution Thermal Intake Manifold Gasket: Honda Civic Si 2006-2009 Mitsubishi Evolution X Front Engine Mount
Torque Solution Thermal Intake Manifold Gaskets
Applications: Honda Civic Si 2006-2009
 
Torque Solution Thermal Intake Manifold Gaskets use a proprietary gasket material that lowers intake temps by reducing heat transfer from the head to the intake manifold. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free and are reusable. Great for all motor and forced induction applications.
 
- Dramatically Reduces Inlet Temps
- Increases Horsepower
- Precision Cut for Superior Fitment
- Street & Track Torture Tested
- Made in the USA
 
 
Torque Solution Engine Mount
Applications:
Mitsubishi Evolution X 2008-2015

Torque Solution Mounts Increase horsepower by reducing frictional lost due to poor axle geometry. Axle geometry under acceleration is very critical when trying to apply horsepower. Poor axle geometry is caused when engine and suspension center lines are changed. By installing Torque Solution Billet engine mounts engine center line are kept within precision tolerances.For street and race applications. Some vibration noticeable..



- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 600HP+ and 9sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Adjustable Thrust Arm Bushing Kit: Porsche Torque Solution Thermal Intake Manifold Gasket: Hyundai Genesis 2.0T 2010-2012
MSRP$225.00
MSRP$39.99
Porsche Adjustable Thrust Arm Bushing Kit Torque Solution Thermal Intake Manifold Gasket: Hyundai Genesis 2.0T 2010+
Torque Solution Adjustable Thrust Arm Bushing Kit
Applications: 996TT/GT2/GT3/C2/C4/C4S and GT3 Cup / 997TT/GT2/GT3 & RS/C2/C4 and GT3 Cup

Torque Solution adjustable thrust arm bushing kit replaces the factory, rubber bushings on the wheel-end of the control arms with a billet aluminum bushing, this will allow for better handling and most important also allows for the adjustment of caster.Replacement thrust arm bushings significantly improve the handling and response from your 996 or 997 suspension.

Can be used in all lower stock control arms as well as adjustable Porsche Motorsport Cup arms. Eliminates unwanted caster changes in both front and rear suspension under acceleration and deceleration. Helps minimize the soft feeling on the multilink factory suspension without major added in cabin road noise.. A great improvement for street cars and a must for anyone taking their car to the track. Your cars alignment on Factory equipment will change the 1st few laps around the track without solid thrust bushings to keep things in check.

Sold in kits of 4 to replace front or rear lower control arm bushings.

Fitment:
- 996TT/GT2/GT3/C2/C4/C4S and GT3 Cup
-
997TT/GT2/GT3 & RS/C2/C4 and GT3 Cup

Torque Solution Thermal Intake Manifold Gaskets
Applications: Hyundai Genesis 2.0T 2010-2012
Torque Solution Thermal Intake Manifold Gaskets use a proprietary gasket material that lowers intake temps by reducing heat transfer from the head to the intake manifold. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free and are reusable. Great for all motor and forced induction applications.
- Dramatically Reduces Inlet Temps
- Increases Horsepower
- Precision Cut for Superior Fitment
- Street & Track Torture Tested
- Made in the USA


certified secure site
We accept Mastercard, Visa, American Express, and Discover