Home > Kits /Combos > Engine Mount Kits
Sort By:
Page of 1
Torque Solution Engine Mount Kit: Porsche 911 1998-11 Torque Solution Billet Aluminum Engine Mount Kit: Dodge Neon Srt-4 2003-05 Torque Solution Billet Aluminum 4 Piece Full Engine Mount Kit: Mitsubishi Evolution VII-IX 2001-2006
MSRP$399.99
MSRP$306.99
MSRP$464.99
Porsche Engine Mount Kit Dodge Neon Srt-4 Engine Mount Kit Mitsubishi Evolution VII-IX Engine Mount Kit
Torque Solution Engine Mount Kit
Applications: Porsche 996TT/GT2/GT3/C2/C4/C4S & GT3 Cup 997TT/GT2/GT3 & RS/C2/C4 and GT3 Cup

Torque Solution Porsche Engine Mounts are designed to limit the amount of Engine movement from side to side which throws off the balance of the car under load. The factory mounts allow the engine to move which gives the feeling of a sloppy drivetrain. The mounts will give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the engine movement without the issue of Solid Mount Vibration. The next issue with Solid mounts is the transmission of noise from the chassis to the knock sensor on the engine which can result in a tuning nightmare. These mounts will not affect knock sensor like solid mounts do..


*Polyurethane Pictured in BLUE to show design. You will receive in all black.


- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty

Torque Solution Engine Mounts
Applications: Dodge Neon Srt-4 2000-2005

 

Torque Solution is proud to offer the best complete engine mount set available for the Dodge Neon SRT-4. All mounts are made out of high grade billet aluminum material machined to the tightest tolerances. All the mounts bushings are made with 50% more urethane giving you the least amount of vibrations when compared to the competitors. These engine mounts are the lightest on the market. They can be seen on the fastest World Challenge Neon SRT-4's in the world. Wheel hop is notorious for snapping axles. Consider that a thing of the past. This combination of mounts will eliminate wheel hop giving you optimal traction under the harshest of conditions while saving your axles.These are the same mounts in the fastest world challenge Neon SRT-4's in the world.

 
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Life Time Warranty

Torque Solution Engine Mount Kit ( 5 Speed )
Applications: Mitsubishi Evolution VII-IX 2001-2006

Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins.These mounts can be seen on some of the fastest street and track EVO's in the world. Our mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting mounts that will be reliable for years to come and help you win on race day!

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Billet Aluminum 4 Piece Engine Mount Kit: Mitsubishi Evolution VII-IX 2001-2006 Torque Solution Billet aluminum 3 piece Engine Mount kit: Mitsubishi Evolution VII-IX 2001-2006 Torque Solution Billet aluminum 3 piece Engine Mount kit: Mitsubishi Evolution VII-IX 2001-2006
MSRP$464.99
MSRP$369.99
MSRP$369.99
Mitsubishi Evolution 4pc Engine Mount Kit Mitsubishi Evolution 3pc Engine Mount Kit Mitsubishi Evolution Engine Mount kit
Torque Solution Engine Mount Kit ( 6 Speed )
Applications: Mitsubishi Evolution VII-IX 2001-2006
Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins.These mounts can be seen on some of the fastest street and track EVO's in the world. Our mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting mounts that will be reliable for years to come and help you win on race day!
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 8sec e.t. torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty

Torque Solution Engine Mount Kit ( 5 Speed)
Applications: Mitsubishi Evolution VII-IX 2001-2006

Torque Solution motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins. These mounts can be seen on some of the fastest street and track EVO's in the world. These mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mounts that will be reliable for years to come and help you win on race day! This kit comes with the following -5spd trans mount -side engine mount -front engine mount

- Eliminates wheel hop / traction loss
- mproved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Engine Mount Kit ( 6 Speed )
Applications: Mitsubishi Evolution VII-IX 2001-2006
The Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins. Here at Torque Solution our mounts are anodized black with torque solution laser engraved. These mounts can be seen on some of the fastest street and track EVO's in the world. These mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mounts that will be reliable for years to come and help you win on race day! This kit comes with the following -side engine mount -front engine mount -6spd trans mount
Torque Solution Mitsubishi EVO VII-IX Billet 3 piece mount Kit: Mitsubishi Evolution VII-IX 2001-2006 Torque Solution Mitsubishi EVO VII-IX Billet 3 piece mount Kit: Mitsubishi Evolution VII-IX 2001-2006 Torque Solution Billet Aluminum 3pc Engine Mount Kit: Honda Civic EF 88-91 w/ B Series
MSRP$379.99
MSRP$379.99
MSRP$329.99
CLEARANCE$179.99
You save $150.00!
Mitsubishi Evolution Engine Mounts Mitsubishi EVO Engine Mounts
Torque Solution Engine Mount Kit ( 5 speed )
Applications: Mitsubishi Evolution VII-IX 2001-2006


Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins.These mounts can be seen on some of the fastest street and track EVO's in the world. These mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mounts that will be reliable for years to come and help you win on race day! This kit comes with the following. -Side engine mount -Rear engine mount -5 spd trans mount


- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Engine Mount Kit ( 6 Speed )
Applications: Mitsubishi Evolution VII-IX 2001-2006
 
Torque Solution  motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins. These mounts can be seen on some of the fastest street and track EVO's in the world. These mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mounts that will be reliable for years to come and help you win on race day! This kit comes with the following -Side engine mount -Rear engine mount -6 spd trans mount
 
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 8sec e.t. torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty

 
 
Torque Solution Engine Mount Kit
Applications: Honda Civic EF 88-91 w/ B Series


The Honda B Series w/ Cable Trans Swap Kit is designed to make swapping in a B series for your single cam a painless procedure. This kit will produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This mount kit can be seen in some of the fastest Hondas on the street and at the track!


-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Limited Lifetime Warranty

Torque Solution 3pc Billet Engine Mount Kit (3 Bolt): 92-95 Honda Civic, 94-01 Integra, 93-97 Del Sol, B or D Series Torque Solution 3pc Billet Engine Mount Kit (2bolt): 92-95 Honda Civic, 94-01 Integra, 93-97 Del Sol, B or D Series Torque Solution Billet Aluminum Mount Kit ( 2 Bolt ): Honda Civic 96-00 EK B or D-Series
MSRP$279.99
MSRP$279.99
MSRP$349.99
Torque Solution 3pc Engine Mount Kit
Applications: 92-95 Honda Civic, 94-01 Integra, 93-97 Del Sol, B or D Series
The Torque Solution mount kit is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the left, right, and rear engine mount. This mount kit can be seen in some of the fastest Hondas on the street and at the track!

*This kit is designed to be used with the stock B series engine (w/ 3 Bolt Left Mount) and transmission in the 94-01 Integra. Also compatible with with D series Engine with 3 Bolt Left Hand Bracket.
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Limited Lifetime Warranty

Torque Solution 3pc Engine Mount Kit
Applications: 92-95 Honda Civic, 94-01 Integra, 93-97 Del Sol, B or D Series
The Torque Solution mount kit is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the left, right, and rear engine mount. This mount kit can be seen in some of the fastest Hondas on the street and at the track!

*This kit is designed to be used with the stock D series engine (w/ 2 Bolt Left Mount) and transmission in the 92-95 Civic. Also compatible with with B series Engine with 2 Bolt Left Hand Bracket.
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Limited Lifetime Warranty

Torque Solution Engine Mount Kit
Applications: Honda Civic 96-00 EK B or D-Series (2 Bolt)

Our engine mount kit is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This mount kit is a direct replacement of the OEM mounts especially the liquid filled engine mount, which tends to fail even on completely stock Civics.


- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Steel Mounting Bracket
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Billet Aluminum Mount Kit ( 3 Bolt ): Honda Civic 96-00 EK B or D-Series Torque Solution Billet Aluminum Engine Mount Kit: Acura RSX 2002-2006 DC5 Torque Solution Billet Aluminum Engine Mount Kit: Honda Civic Si 2002-2005
MSRP$349.99
MSRP$379.99
MSRP$379.99
Torque Solution Engine Mount Kit
Applications: Honda Civic 96-00 EK B or D-Series (3 Bolt)

Our engine mount kit is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This mount kit is a direct replacement of the OEM mounts especially the liquid filled engine mount, which tends to fail even on completely stock Civics.


- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Steel Mounting Bracket
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Billet Aluminum Engine Mount Kit
Applications: Acura RSX 2002-2006 DC5 Base & Type-S

Our Engine Mount Kit is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins.


Our 3 piece mount kit includes driver, passenger and rear engine mounts.


- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Steel Mounting Bracket
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Billet Aluminum Engine Mount Kit
Applications: Honda Civic Si 2002-2005 EP3

Our Engine Mount Kit is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins.


Our 3 piece mount kit includes driver, passenger and rear engine mounts.


- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Steel Mounting Bracket
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Billet Engine & Transmission Mounts Kit: Chevrolet Corvette C6 2005-2013 Torque Solution 4 Piece Engine Mount Kit: Mitsubishi Lancer Evolution X 2008-2015 Torque Solution 3 Piece Rear Engine Mount Kit: Mitsubishi Lancer Evolution X 2008-2015
MSRP$589.99
MSRP$539.99
MSRP$439.99
Torque Solution Billet Engine & Transmission Mounts Kit: Chevrolet Corvette C6 2005-2013 Mitsubishi Evolution X Engine Mount Mitsubishi Evolution X Engine Mount Kit
Torque Solution Billet Engine & Transmission Mounts Kit
Applications: Chevrolet Corvette C6 2005-2013 (all models)


Torque Solution Billet Engine & Transmission Mounts for the Chevrolet Corvette C6 2005-2013 are made out of high grade billet aluminum material and stainless steel. You can rest assure that with our superior material and design you will get optimal performance for years and decades to come. The mounts feature 75 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration, cornering, and braking. Weather you have a street, strip or autox/road race built car, Torque Solution mounts will deliver the performance you need under all conditions.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black Anodized w/ "TS" Logo
- Stainless Steel Studs and Bracket
- 75A durometer bushings
- Limited Lifetime Warranty
Torque Solution Billet Aluminum 4 Piece Engine Mount Kit
Applications: Mitsubishi Lancer Evolution X 2008-2015

Torque Solution mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability. For street and race applications. Some vibration noticeable.

Kit includes all 4 mounts: Front, Rear, Engine and Transmission

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty
- Fits Manual, SST and Automatic transmission engines
Torque Solution Billet Aluminum 3 Piece Rear Engine Mount Kit
Applications: Mitsubishi Lancer Evolution X 2008-2015

Torque Solution mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability. For street and race applications. Some vibration noticeable.

Kit includes 3 mounts: Rear, Engine and Transmission

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty
- Fits Manual, SST and Automatic transmission engines
Torque Solution 3 Piece Front Engine Mount Kit: Mitsubishi Lancer Evolution X 2008-2015 Torque Solution Roll Stop Engine Mount Kit: Mitsubishi Lancer Evolution X 2008-2015 Torque Solution K Series Swap Mount Kit: Honda Civic 96-00 EK
MSRP$399.99
MSRP$234.99
MSRP$479.99
Mitsubishi Evolution X Engine Mount Kit Mitsubishi Evolution X Engine Mount K Series Swap Mount Kit: Honda Civic 96-00 EK
Torque Solution Billet Aluminum 3 Piece Front Engine Mount Kit
Applications: Mitsubishi Lancer Evolution X 2008-2015

Torque Solution mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability. For street and race applications. Some vibration noticeable.

Kit includes 3 mounts: Front, Engine and Transmission

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty
- Fits Manual, SST and Automatic transmission engines
Torque Solution Billet Aluminum 2 Piece Roll Stop Engine Mount Kit
Applications: Mitsubishi Lancer Evolution X 2008-2015

Torque Solution mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability. For street and race applications. Some vibration noticeable.

Kit includes 2 mounts: Front and Rear

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty
- Fits Manual, SST and Automatic transmission engines
Torque Solution K Series Swap Mount Kit
Applications: Honda Civic 96-00 EK

The Torque Solution engine mount kit is designed to swap a K Series engine into a Honda Civic 96-00 EK while retaining the stock front subframe while also providing proper engine alignment. All Torque Solution engine mounts are made of high grade steel brackets, billet aluminum mounts, urethane bushings, and stainless steel pins.

- 6061-T6 Billet Aluminum Mounts
- Black anodized / Torque Solution Laser engraved
- Powder Coated Steel Mounting Brackets
- 75A durometer bushings
- High Quality Install Hardware
- Limited Lifetime Warranty

   
 
certified secure site
We accept Mastercard, Visa, American Express, and Discover