Home > Mounts > Engine Mounts
Sort By:
Page of 4
Torque Solution Engine Mount Kit: Porsche 911 1998-11 Torque Solution Upper Engine Mount: Dodge Neon 2000-05 Torque Solution Billet Aluminum Upper Engine Mount: Dodge Neon SRT-4 2003-05
MSRP$399.99
MSRP$109.99
MSRP$109.99
Porsche Engine Mount Kit Dodge Neon Upper Engine Mount Dodge Neon SRT-4 Upper Engine Mount
Torque Solution Engine Mount Kit
Applications: Porsche 996TT/GT2/GT3/C2/C4/C4S & GT3 Cup 997TT/GT2/GT3 & RS/C2/C4 and GT3 Cup

Torque Solution Porsche Engine Mounts are designed to limit the amount of Engine movement from side to side which throws off the balance of the car under load. The factory mounts allow the engine to move which gives the feeling of a sloppy drivetrain. The mounts will give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the engine movement without the issue of Solid Mount Vibration. The next issue with Solid mounts is the transmission of noise from the chassis to the knock sensor on the engine which can result in a tuning nightmare. These mounts will not affect knock sensor like solid mounts do..


*Polyurethane Pictured in BLUE to show design. You will receive in all black.


- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty

Torque Solution Engine Mount
Applications: Dodge Neon 2000-2005

This mount in particular is the SRT-4 and Neon TOP engine mount. This mount is made out of the same high grade billet aluminum material as that all our mounts are made out of. Coupled with the polyurethane inserts and machined pins you will not only have a great looking mount for that engine bay but one that performs just as well. Lightest mounts on the market! These mounts are on the fastest World Challenge Neon SRT-4's in the country.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Engine Mount
Applications: Dodge Neon Srt-4 2000-2005
 
This mount in particular is the SRT-4 and Neon TOP engine mount. This mount is made out of the same high grade billet aluminum material as that all our mounts are made out of. Coupled with the polyurethane inserts and machined pins you will not only have a great looking mount for that engine bay but one that performs just as well. Lightest mounts on the market! These mounts are on the fastest World Challenge Neon SRT-4's in the country.
 
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Life Time Warranty

 
Torque Solution Billet Aluminum Lower Engine Mount: Dodge Neon 2000-05 Torque Solution Billet Aluminum Lower Engine Mount: Dodge Neon SRT-4 2003-05 Torque Solution Billet Aluminum Engine Mount Combo: Dodge Neon 2000-05
MSRP$114.99
MSRP$114.99
MSRP$203.50
Dodge Neon Lower Engine Mount Dodge Neon SRT-4 Lower Engine Mount Dodge Neon Engine Mount Kit
Torque Solution Engine Mount
Applications: Dodge Neon 2000-2005

This mount in particular is the SRT-4 and Neon lower engine mount. This mount is made out of the same high grade billet aluminum material as that all our mounts are made out of. Coupled with the polyurethane inserts and machined pins you will not only have a great looking mount for that engine bay but one that performs just as well. Lightest mounts on the market! These mounts are on the fastest World Challenge Neon SRT-4's in the country.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Life Time Warranty

Torque Solution Engine Mount
Applications: Dodge Neon Srt-4 2000-2005

 
This mount in particular is the SRT-4 and Neon lower engine mount. This mount is made out of the same high grade billet aluminum material as that all our mounts are made out of. Coupled with the polyurethane inserts and machined pins you will not only have a great looking mount for that engine bay but one that performs just as well. Lightest mounts on the market! These mounts are on the fastest World Challenge Neon SRT-4's in the country.
 
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Life Time Warranty

Torque Solution Engine Mounts
Applications: Dodge Neon 2000-2005
These engine mounts replace the OEM top and lower engine mounts. This combination will reduce 90% of wheel hop and engine movement to improve shifting, traction, and prevent damage to the intercooler hoses and exhaust systems due to excessive engine movement. These mounts have less vibrations when compared too the other aftermarket mounts. Take a look at the amount of urethane we use on each mount. We use 50% more urethane then all out competitors. These are the same mounts in the fastest world challenge Neon SRT-4's in the world.
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Life Time Warranty

Torque Solution Billet Aluminum Engine Mount Combo: Dodge Neon SRT-4 Torque Solution Billet Aluminum Engine Mount Kit: Dodge Neon Srt-4 2003-05 Torque Solution Front Engine Mount: Mitsubishi Eclipse Laser / Talon 1990-94
MSRP$203.50
MSRP$306.99
MSRP$109.99
Dodge Neon SRT-4 Engine Mount Combo Kit Dodge Neon Srt-4 Engine Mount Kit Eclipse Laser Talon Front Engine Mount
Torque Solution Engine Mounts
Applications: Dodge Neon Srt-4 2000-2005

 
These engine mounts replace the OEM top and lower engine mounts. This combination will reduce 90% of wheel hop and engine movement to improve shifting, traction, and prevent damage to the intercooler hoses and exhaust systems due to excessive engine movement. These mounts have less vibrations when compared too the other aftermarket mounts. Take a look at the amount of urethane we use on each mount. We use 50% more urethane then all out competitors. These are the same mounts in the fastest world challenge Neon SRT-4's in the world.
 
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Life Time Warranty

Torque Solution Engine Mounts
Applications: Dodge Neon Srt-4 2000-2005

 

Torque Solution is proud to offer the best complete engine mount set available for the Dodge Neon SRT-4. All mounts are made out of high grade billet aluminum material machined to the tightest tolerances. All the mounts bushings are made with 50% more urethane giving you the least amount of vibrations when compared to the competitors. These engine mounts are the lightest on the market. They can be seen on the fastest World Challenge Neon SRT-4's in the world. Wheel hop is notorious for snapping axles. Consider that a thing of the past. This combination of mounts will eliminate wheel hop giving you optimal traction under the harshest of conditions while saving your axles.These are the same mounts in the fastest world challenge Neon SRT-4's in the world.

 
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Life Time Warranty

Torque Solution Engine Mount
Applications: 
Mitsubishi Eclipse / Laser / Talon 1990-94
 
Torque Solution mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability.For street and race applications. Some vibration noticeable..
 
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Life Time Warranty
Torque Solution Billet Aluminum Passenger Side Engine Mount: Mitsubishi Evolution VII-IX 2001-2006 Torque Solution Billet Aluminum Front Engine Mount: Mitsubishi Evolution VII-IX 2001-2006 Torque Solution Billet Aluminum Rear Engine Mount: Mitsubishi Evolution VII-IX 2001-2006
MSRP$129.99
MSRP$89.99
MSRP$99.99
Mitsubishi Evolution Passenger Side Engine Mount Mitsubishi Evolution Front Engine Mount Mitsubishi Evolution VII-IX Aluminum Rear Engine Mount
Torque Solution Engine Mount
Applications: Mitsubishi  Evolution VII-IX 2001-2006
 
All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM passenger side engine mount. This mount can be seen in some of the fastest evo's on the street and at the track! For best results use with Torque Solution's front engine mount, transmission mount, and rear engine mount.
 

 •Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 8sec e.t. torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty

 
Torque Solution Engine Mount
Applications: Mitsubishi Evolution VII-IX 2001-2006
The Mitsubishi Evolution mount is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop.All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM front engine mount. This mount can be seen in some of the fastest evo's on the street and at the track! For best results use with Torque Solution's passenger side engine mount, transmission mount, and rear engine mount.
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 8sec e.t. torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty

Torque Solution Engine Mount
Applications: Mitsubishi Evolution VII-IX 2001-2006

The Mitsubishi Evolution mount is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM rear engine mount. This mount can be seen in some of the fastest evo's on the street and at the track! For best results use with Torque Solution's passenger side engine mount, transmission mount, and front engine mount.

- Eliminates wheel hop / traction loss
-
Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty
Torque Solution Billet Aluminum 4 Piece Full Engine Mount Kit: Mitsubishi Evolution VII-IX 2001-2006 Torque Solution Billet Aluminum 4 Piece Engine Mount Kit: Mitsubishi Evolution VII-IX 2001-2006 Torque Solution Billet aluminum 3 piece Engine Mount kit: Mitsubishi Evolution VII-IX 2001-2006
MSRP$464.99
MSRP$464.99
MSRP$369.99
Mitsubishi Evolution VII-IX Engine Mount Kit Mitsubishi Evolution 4pc Engine Mount Kit Mitsubishi Evolution 3pc Engine Mount Kit
Torque Solution Engine Mount Kit ( 5 Speed )
Applications: Mitsubishi Evolution VII-IX 2001-2006

Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins.These mounts can be seen on some of the fastest street and track EVO's in the world. Our mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting mounts that will be reliable for years to come and help you win on race day!

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Engine Mount Kit ( 6 Speed )
Applications: Mitsubishi Evolution VII-IX 2001-2006
Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins.These mounts can be seen on some of the fastest street and track EVO's in the world. Our mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting mounts that will be reliable for years to come and help you win on race day!
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 8sec e.t. torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty

Torque Solution Engine Mount Kit ( 5 Speed)
Applications: Mitsubishi Evolution VII-IX 2001-2006

Torque Solution motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins. These mounts can be seen on some of the fastest street and track EVO's in the world. These mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mounts that will be reliable for years to come and help you win on race day! This kit comes with the following -5spd trans mount -side engine mount -front engine mount

- Eliminates wheel hop / traction loss
- mproved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Billet aluminum 3 piece Engine Mount kit: Mitsubishi Evolution VII-IX 2001-2006 Torque Solution Billet Aluminum Front Engine Mount: Mitsubishi Evolution X 2008-2015 Torque Solution Front Engine Mount: Mitsubishi Galant VR4 1991,92,93
MSRP$369.99
MSRP$109.99
MSRP$99.99
Mitsubishi Evolution Engine Mount kit Mitsubishi Evolution X Front Engine Mount Mitsubishi Galant VR4 Front Engine Mount
Torque Solution Engine Mount Kit ( 6 Speed )
Applications: Mitsubishi Evolution VII-IX 2001-2006
The Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins. Here at Torque Solution our mounts are anodized black with torque solution laser engraved. These mounts can be seen on some of the fastest street and track EVO's in the world. These mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mounts that will be reliable for years to come and help you win on race day! This kit comes with the following -side engine mount -front engine mount -6spd trans mount
Torque Solution Engine Mount
Applications:
Mitsubishi Evolution X 2008-2015

Torque Solution Mounts Increase horsepower by reducing frictional lost due to poor axle geometry. Axle geometry under acceleration is very critical when trying to apply horsepower. Poor axle geometry is caused when engine and suspension center lines are changed. By installing Torque Solution Billet engine mounts engine center line are kept within precision tolerances.For street and race applications. Some vibration noticeable..



- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 600HP+ and 9sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Engine Mount
Applications: 
Mitsubishi Galant VR4 1991,92,93
 
Torque Solution mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability.For street and race applications. Some vibration noticeable..
 
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•Street and track torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty
Torque Solution Front Engine Mount: Mitsubishi Ralliart Gts 2008-2013 Torque Solution Billet Aluminum Front Engine Mount: Mitsubishi Lancer 2002-06 Torque Solution Billet Aluminum Front Engine Mount: Mitsubishi Lancer 2004-06
MSRP$109.99
MSRP$89.99
MSRP$89.99
Mitsubishi Ralliart Gts Front Engine Mount Mitsubishi Lancer Front Engine Mount Mitsubishi Lancer Front Engine Mount
Torque Solution Engine Mount
Applications: Mitsubishi Ralliart Gts 2008-2011
 
Our mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability.For street and race applications. Some vibration noticeable..
 
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•Street and track torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty

Torque Solution Front Engine Mount
Applications: 
 Mitsubishi Lancer 2002-2003
 
Torque Solution mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability.For street and race applications. Some vibration noticeable..
 
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•Street and track torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty

Torque Solution Front Engine Mount
Applications: 
Mitsubishi Lancer 2004-2006
 
Torque Solution  mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability.For street and race applications. Some vibration noticeable..
 
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•Street and track torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty

Torque Solution Aluminum Rear Engine Mount: Mazdaspeed 3 & Mazda3 ALL Torque Solution Billet Aluminum Upper Engine Mount: Chrysler Pt Cruiser 00-11 Torque Solution Billet Aluminum Lower Engine Mount: Chrysler Pt Cruiser 00-11
MSRP$119.99
MSRP$109.99
MSRP$114.99
Torque Solution Aluminum Rear Engine Mount: Mazdaspeed 3 & Mazda3 ALL Chrysler Pt Cruiser Upper Engine Mount Chrysler Pt Cruiser Lower Engine Mount
Torque Solution Billet Aluminum Rear Engine Mount
Application: MAZDASPEED 3, Mazda3

Torque Solution mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability.For street and race applications. Some vibration noticeable.

***Note: The Mazda rear mount has been revised July 2014. The new version is pictured.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Engine Mount
Applications: Chrysler Pt Cruiser 00-11
 
Torque Solution mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability.For street and race applications. Some vibration noticeable..Lightest mounts on the market! These mounts are on the fastest World Challenge Neon SRT-4's in the country.
 
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•Street and track torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty

Torque Solution Engine Mount
Applications: Chrysler Pt Cruiser 00-11
 
Torque Solution's lower engine mount for the Chrysler Pt Cruiser.Our mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability.Some vibration noticeable..Lightest mounts on the market! These mounts are on the fastest World Challenge Neon SRT-4's in the country.
 
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•Street and track torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty

 
 
Torque Solution Billet Aluminum Upper & Lower Engine Mount: Chrysler Pt Cruiser 00-11 Torque Solution Billet Aluminum Front Engine Mount: Mitsubishi Lancer 2008-2016 Torque Solution Billet Aluminum Front Engine Mount: Mitsubishi Lancer Sportback 2009-2016
MSRP$203.50
MSRP$109.99
MSRP$109.99
Chrysler Pt Cruiser Upper & Lower Engine Mount Mitsubishi Lancer Front Engine Mount Mitsubishi Lancer Sportback Front Engine Mount
Torque Solution Engine Mount
Applications: Chrysler Pt Cruiser 00-11
 
Torque Solution is proud to announce our billet engine mount set for the Chrysler PT Cruiser. These engine mounts replace the OEM top and lower engine mounts. This combination will reduce 90% of wheel hop and engine movement to improve shifting, traction, and prevent damage to the intercooler hoses and exhaust systems due to excessive engine movement. We offer a "Limited Lifetime Warranty" on all of are billet mounts. These mounts have less vibrations when compared too the other aftermarket mounts. Take a look at the amount of urethane we use on each mount. We use 50% more urethane then all out competitors. These are the same mounts in the fastest world challenge Neon SRT-4's in the world which incorporate the same engine mounts at the PT Cruiser.
 
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•Street and track torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty
Torque Solution Engine Mount
Applications: Mitsubishi Lancer 2008-2016

Our mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability.For street and race applications. Some vibration noticeable..

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Front Engine Mount
Applications:
Mitsubishi Lancer Sportback 2009-2016

Torque Solution mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability.For street and race applications. Some vibration noticeable..

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty
Torque Solution Engine Mounts: Subaru WRX 2002-2014 / STi 2002-2017 Torque Solution Front Engine Mount: Scion Tc 2005-10 Torque Solution Billet Aluminum Rear Engine Mount: 92-00 Honda Civic EG & EK / 94-01 Integra / 93-97 Del Sol
MSRP$234.99
MSRP$89.99
MSRP$94.99
Subaru Wrx Sti Engine Mounts Scion Tc Front Engine Mount Torque Solution Billet Aluminum Rear Engine Mount: 92-00 Honda Civic EG & EK / 94-01 Integra / 93-97 Del Sol
Torque Solution Engine Mounts
Applications: Subaru Wrx Sti Impreza Legacy Forester


Torque Solution engine mounts you will see and feel a difference in your WRX or STi. These mounts are made out of high grade billet aluminum material and steel. You can rest assure that with our superior material and design you will get optimal performance for years and decades to come. The mounts feature 75 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration, cornering, and braking. Weather you have a street, strip or autox/road race built car, Torque Solution mounts will deliver the performance you need under all conditions.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty


All 06+ models will require 02-05 Subaru WRX mount plates to properly install. The OEM Subaru part #'s are 41031AA281 & 41031AA290.

Will not fit Subaru WRX 2015+.
Torque Solution Engine Mount
Applications: Scion Tc 2005-2010

Torque Solution mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability.For street and race applications. Some vibration noticeable..

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty

Torque Solution Engine Mount
Applications: 92-00 Honda Civic EG & EK / 94-01 Integra / 93-97 Del Sol
The Honda / Acura Rear mount is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM rear engine mount. This mount can be seen in some of the fastest Hondas on the street and at the track!
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Limited Lifetime Warranty

   
 
certified secure site
We accept Mastercard, Visa, American Express, and Discover