Home > Inserts > Engine Mount Inserts
Sort By:
Page of 1
Torque Solution Engine Mount Inserts: Dodge Caliber 2006-11 Torque Solution Engine Mount Inserts: Mitsubishi Evolution X 2008-14 Torque Solution Engine Mount Inserts: Dodge Caliber 2006-11
MSRP$54.99
MSRP$54.99
MSRP$108.99
Dodge Caliber Engine Mount Inserts Mitsubishi Evolution X Engine Mount Inserts Dodge Caliber Engine Mount Inserts
Torque Solution Engine Mount Incerts
Applications: Dodge Caliber 2006-2011
Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM Dodge Caliber engine mounts.Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution. Fits both drivers side and passenger side.
  • Eliminates wheel hop / traction loss
  • Improved 60fts / e.t's Street and track torture tested
  • 75A durometer bushings
  • Life Time Warranty
Torque Solution Engine Mount Inserts
Applications: Mitsubishi Evolution X 2008-2014


Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM EVO X engine mounts. Made from 75a durometer polyurethane. Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution. Fits both drivers side and passenger side.


- Eliminates wheel hop / traction loss
-
Improved 60fts / e.t's Street and track torture tested
-
75A durometer bushings
-
Limited Lifetime Warranty
Torque Solution Engine Mount Incerts
Applications:
Dodge Caliber 2006-2011

Torque Solution is proud to announce our new billet engine mounts for the Dodge Caliber. These mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability.For street and race applications. Some vibration noticeable..

•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Street and track torture tested
•75A durometer bushings
•Life Time Warranty
Torque Solution Engine Mount Inserts: Mitsubishi Evolution X 2008-2014 Torque Solution Engine Mount Inserts: Mitsubishi Ralliart Gts 2008+ Torque Solution Engine Mount Inserts: Mitsubishi Ralliart Gts 2008-11
MSRP$104.99
MSRP$54.99
MSRP$104.99
Evolution X Engine Mount Inserts Mitsubishi Ralliart Gts Engine Mount Inserts Mitsubishi Ralliart Engine Mount Inserts
Torque Solution Engine Mount Insert
Applications: Mitsubishi Evolution X 2008-2014

Torque Solution includes 2 urethane bushings and a sleeve for the PASSENGER side and 2 urethane bushings and a sleeve for the DRIVER side. Upgrading your stock rubber bushings to urethane bushings will help reduce engine movement and wheel hop. This means you receive better traction, which will improve your 60ft and 1/4 mile time. Affordable price, easy install, and most importantly you'll see and feel the advantages.



- Eliminates wheel hop / traction loss
-
Improved 60fts / e.t's Street and track torture tested
-
75A durometer bushings
-
Life Time Warranty
Torque Solution Engine Mount Insert
Applications: Mitsubishi Ralliart Gts 2008-2011
 
Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM Dodge Caliber engine mounts.Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution. Fits both drivers side and passenger side.
  • Eliminates wheel hop / traction loss
  • Improved 60fts / e.t's Street and track torture tested
  • 75A durometer bushings
  • Life Time Warranty

Torque Solution engine mount insert combo for the Lancer Ralliart. Kit includes inserts and sleeves for both passenger and driver side engine mount.

  • Reduced 60ft's
  • Reduced e.t.'s
  • Improved traction
  • 60 durometer urethane
  • Steel sleeves
  • Easy installation
Torque Solution Engine Mount Inserts: Mitsubishi Lancer 2008-15 Torque Solution Engine Mount Inserts: Mitsubishi Lancer 2008-11 Torque Solution Engine Mount Inserts: Mitsubishi Lancer Sportback 2008-11
MSRP$54.99
MSRP$104.99
MSRP$54.99
Lancer Engine Mount Inserts Lancer Engine Mount Inserts Mitsubishi Lancer Sportback Engine Mount Inserts
Torque Solution engine mount inserts for the Mitsubishi Lancer. Inserts can be placed on the passenger side or driver side engine mount.

  • Reduce engine movement
  • Improved 60fts
  • Improved traction
  • 60 durometer urethane
  • Improved e.t.'s
  • Easy installation
Torque Solution engine mount insert combo for the Lancer. Kit includes inserts and sleeves for both passenger and driver side engine mount.

  • Reduced 60ft's
  • Reduced e.t.'s
  • Improved traction
  • 60 durometer urethane
  • Steel sleeves
  • Easy installation
Torque Solution Engine Mount Incert
Applications: Mitsubishi Lancer Sportback 2008-2011 
Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM EVO X engine mounts. Made from 70 durometer polyurethane. Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution. Fits both drivers side and passenger side.
  • Eliminates wheel hop / traction loss
  • Improved 60fts / e.t's Street and track torture tested
  • 70A durometer bushings
  • Life Time Warranty
Torque Solution Engine Mount Inserts: Mitsubishi Lancer Sportback 2008-2011 Torque Solution Driver / Passenger Engine Mount Inserts : Mitsubishi Evolution 5/6/7/8/9 Torque Solution Front Engine Mount Inserts : Mitsubishi Evolution 8/9 2003-2006
MSRP$104.99
MSRP$59.99
MSRP$44.99
Mitsubishi Lancer Sportback Engine Mount Inserts
Torque Solution Engine Mount Incert
Applications: Mitsubishi Lancer Sportback 2008-2011
 
Torque Solution includes 2 urethane bushings and a sleeve for the PASSENGER side and 2 urethane bushings and a sleeve for the DRIVER side. Upgrading your stock rubber bushings to urethane bushings will help reduce engine movement and wheel hop. This means you receive better traction, which will improve your 60ft and 1/4 mile time. Affordable price, easy install, and most importantly you'll see and feel the advantages.
 
  • Eliminates wheel hop / traction loss
  • Improved 60fts / e.t's Street and track torture tested
  • 75A durometer bushings
  • Life Time Warranty

Torque Solution Driver / Passsenger Engine Mount Inserts
Applications: Mitsubishi Evolution 5/6/7/8/9

Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM EVO 8/9 engine mounts. Made from 75a durometer polyurethane. Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution. Fits Drivers side housing and Transmission Side..

Includes 1 pair of bushings for either Cam Side of Engine or Trans Side.. If you need both you must order Qty 2.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-600HP+ and 9sec e.t. torture tested
-75A durometer bushings
-Life Time Warranty
Torque Solution Front Engine Mount Inserts
Applications: Mitsubishi Evolution 8/9 2003-2006

Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM EVO 8/9 engine mounts. Made from 75a durometer polyurethane. Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution. Fits OEM Front Mount Housing..


-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-600HP+ and 9sec e.t. torture tested
-75A durometer bushings
-Life Time Warranty
Torque Solution Engine Mount Inserts: Dodge Neon 2000-2005 & SRT Torque Solution Engine Mount Inserts: Chrysler PT Cruiser 2000+ Torque Solution Lower Engine Mount Inserts: Kia Optima T-GDI 2011+
MSRP$32.99
MSRP$34.99
MSRP$42.99
Torque Solution Upper and Lower Engine Mount Inserts
Applications: Dodge Neon 200-2005 & SRT-4

Torque Solution polyurethane engine mount inserts fill the void in your stock mounts. This allows the mount to retain its solid shape and avoid the common cracking issues. Made from 75a durometer polyurethane insert includes a washer for each of the mounts. These give you improved traction and reduced wheel hop without to much vibration. Each kit comes with an insert for the upper and the lower mount.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-600HP+ and 9sec e.t. torture tested
-75A durometer bushings
-Limited Lifetime Warranty
Torque Solution Upper and Lower Engine Mount Inserts
Applications: Chrysler PT Cruiser 2000+

Torque Solution polyurethane engine mount inserts fill the void in your stock mounts. This allows the mount to retain its solid shape and avoid the common cracking issues. Made from 75a durometer polyurethane insert includes a washer for each of the mounts. These give you improved traction and reduced wheel hop without to much vibration. Each kit comes with an insert for the upper and the lower mount.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-600HP+ and 9sec e.t. torture tested
-75A durometer bushings
-Limited Lifetime Warranty
Torque Solution Lower Engine Mount Inserts
Applications: Kia Optima T-GDI 2011+
 
Torque Solution polyurethane engine mount inserts that replace the soft inner rubber material of the OEM Lower Engine Mount. Includes 2pc for each application. These give you improved traction and reduced wheel hop without too much vibration. Also stops the pitching of the engine under hard acceleration and on/off throttle situations which in return allows you to put the power to the ground!!!!
       
                    
  • Eliminates wheel hop / traction loss
  • Improved 60fts / e.t's Street and track torture tested
  • 75A durometer bushings
  • Limited Lifetime Warranty

Torque Solution Lower Engine Mount Inserts: Hyundai Veloster 2011+ Torque Solution Porsche Engine Mount Inserts: Porsche 986 Boxster 1997-2004 Torque Solution Porsche Engine Mount Inserts: Porsche 987 Boxster / Cayman 2005-2008
MSRP$42.00
MSRP$69.99
MSRP$69.99
Torque Solution Lower Engine Mount Inserts
Applications: Hyundai Veloster 2011+
Torque Solution polyurethane engine mount inserts that replace the soft inner rubber material of the OEM Lower Engine Mount. Includes 2pcs for each application. These give you improved traction and reduced wheel hop without too much vibration. Also stops the pitching of the engine under hard acceleration and on/off throttle situations which in return allows you to put the power to the ground!!!!
  • Eliminates wheel hop / traction loss
  • Improved 60fts / e.t's
  • Street and track torture tested
  • 75A durometer bushings
  • Limited Lifetime Warranty

Torque Solution Urethane Engine Mount Inserts
Applications: Porsche 986 Boxster 1997-2004

Torque Solution Porsche Engine Mount Inserts are designed to limit the amount of engine movement under on off throttle and braking conditions. The factory mount allows the engine to move which gives the feeling of a sloppy drivetrain. The mounts will give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the engine movement without the issue of Solid Mount Vibration. Why replace your broken mount with the same rubber mount that will break again due to deteriorating rubber. Replace the worn rubber with Limited Lifetime Warranty Polyurethane Inserts!!

- Smoother Shifting while Rev Matching
- Less movement under braking
- 75A durometer bushings
- Limited Lifetime Warranty
Torque Solution Urethane Engine Mount Inserts
Applications: Porsche 987 Boxster / Cayman 2005-2008

Torque Solution Porsche Engine Mount Inserts are designed to limit the amount of engine movement under on off throttle and braking conditions. The factory mount allows the engine to move which gives the feeling of a sloppy drivetrain. The mounts will give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the engine movement without the issue of Solid Mount Vibration. Why replace your broken mount with the same rubber mount that will break again due to deteriorating rubber. Replace the worn rubber with Limited Lifetime Warranty Polyurethane Inserts!!

- Smoother Shifting while Rev Matching
- Less movement under braking
- 75A durometer bushings
- Limited Lifetime Warranty
Torque Solution Front Engine Mount Insert: Mitsubishi Eclipse 3G 4cyl & V6 2000-2005 Torque Solution Rear Engine Mount Insert: Mitsubishi Eclipse DSM 1G 1990-1994 Torque Solution Engine Mount Insert: Mitsubishi Eclipse 3G 4cyl & V6 2000-2005
MSRP$34.99
MSRP$29.99
MSRP$44.99
Torque Solution Front Engine Mount Insert: Mitsubishi Eclipse 3G 2000-2005 Torque Solution Rear Engine Mount Insert: Mitsubishi Eclipse DSM 1G 1990-1994 Torque Solution Engine Mount Insert: Mitsubishi Eclipse 3G 4cyl & V6 2000-2005
Torque Solution Front Engine Mount Insert
Applications: Mitsubishi Eclipse 3G 4cyl & V6 2000-2005

Torque Solution polyurethane front engine mount insert replaces the inner rubber material of the OEM engine mount. Made from 75a durometer polyurethane. Each kit includes 1 insert and a center steel sleeve. Provides improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution. Fits OEM Front Mount Housing..


-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-75A durometer bushings
-Life Time Warranty
Torque Solution Rear Engine Mount Insert
Applications: Mitsubishi Eclipse DSM 1G 1990-1994 (FWD, AWD, Turbo, Non-Turbo)

Torque Solution polyurethane rear engine mount inserts that replace the inner rubber material of the OEM DSM rear mount. Made from 75a durometer polyurethane. Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution.


- Eliminates wheel hop / traction loss
-
Improved 60fts / e.t's Street and track torture tested
-
75A durometer bushings
-
Life Time Warranty
-



Fits:
-
EAGLE TALON 1990-1994
- MITSUBISHI ECLIPSE 1990-1994
- PLYMOUTH LASER 1990-1994
Torque Solution Engine Mount Insert
Applications: Mitsubishi Eclipse 3G V6 2000-2005

Torque Solution polyurethane engine mount inserts replace the inner rubber material of the OEM engine mounts. Made from 75a durometer polyurethane. Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution.


- Eliminates wheel hop / traction loss
-
Improved 60fts / e.t's Street and track torture tested
-
75A durometer bushings
-
Life Time Warranty
Torque Solution Engine Mount Insert: Mitsubishi Eclipse DSM 1G 1990-1994 Torque Solution Lower Engine Mount Inserts: Kia Rio 2012+ Torque Solution Lower Engine Mount Inserts: Hyundai Sonata T-GDI 2.0 Turbo
MSRP$44.99
MSRP$42.00
MSRP$42.99
Torque Solution Engine Mount Insert: Mitsubishi Eclipse DSM 1G 1990-1994
Torque Solution Engine Mount Insert
Applications: Mitsubishi Eclipse DSM 1G 1990-1994 (FWD, AWD, Turbo, Non-Turbo)

Torque Solution polyurethane engine mount inserts replace the inner rubber material of the OEM DSM engine mounts. Made from 75a durometer polyurethane. Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution.


- Eliminates wheel hop / traction loss
-
Improved 60fts / e.t's Street and track torture tested
-
75A durometer bushings
-
Life Time Warranty


Fits:
-
EAGLE TALON 1990-1994
- MITSUBISHI ECLIPSE 1990-1994
- PLYMOUTH LASER 1990-1994
Torque Solution Lower Engine Mount Inserts
Applications: Kia Rio 2012+


Torque Solution polyurethane engine mount inserts that replace the soft inner rubber material of the OEM Lower Engine Mount. Includes 2pcs for each application. These give you improved traction and reduced wheel hop without too much vibration. Also stops the pitching of the engine under hard acceleration and on/off throttle situations which in return allows you to put the power to the ground!!!!

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Street and track torture tested
- 75A durometer bushings
- Limited Lifetime Warranty
Torque Solution Lower Engine Mount Inserts
Applications: Hyundai Sonata T-GDI 2.0 Turbo
Torque Solution polyurethane engine mount inserts that replace the soft inner rubber material of the OEM Lower Engine Mount. Includes 2pc for each application. These give you improved traction and reduced wheel hop without too much vibration. Also stops the pitching of the engine under hard acceleration and on/off throttle situations which in return allows you to put the power to the ground!!!!

- Eliminates wheel hop / traction loss
-
Improved 60fts / e.t's Street and track torture tested
-
75A durometer bushings
-
Limited Lifetime Warranty
Torque Solution Porsche Engine / Transmission Mount Inserts (Street): Porsche 981 Boxster, Cayman / 911 (991) Torque Solution Porsche Engine / Transmission Mount Inserts (Race): Porsche 981 Boxster, Cayman / 911 (991)
MSRP$89.99
MSRP$89.99
Torque Solution Porsche Engine / Transmission Mount Inserts (Street): Porsche 981 Boxster, Cayman / 911 (991) Torque Solution Porsche Engine / Transmission Mount Inserts (Race): Porsche 981 Boxster, Cayman / 911 (991)
Torque Solution Urethane Engine / Transmission Mount Inserts
Applications: Porsche 981 Boxster, Cayman / 911 (991)

Torque Solution Porsche Engine / Transmission Mount Inserts are designed to fill the voids in the in the OEM rubber mount bushings. This makes for an easier install due to not having to press out your OEM rubber bushings. The rubber mounts allows the engine / transmission to move which gives the feeling of a sloppy drivetrain. Our inserts limit the amount of drivetrain movement during on off throttle and braking conditions. The inserts will also give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the engine movement without the issue of Solid Mount Vibration. Installing our insert will also ensure your OEM mount does not break or become week from use.

- Smoother Shifting While Rev Matching
- Less Movement Under Acceleration and Braking
- 60A Durometer Bushings
- Limited Lifetime Warranty

Fits:
-
Porsche 981 Boxster, Cayman Transmission Mount
- Porsche 911 991 Engine Mount
Torque Solution Urethane Engine / Transmission Mount Inserts
Applications: Porsche 981 Boxster, Cayman / 911 (991)

Torque Solution Porsche Engine / Transmission Mount Inserts are designed to fill the voids in the in the OEM rubber mount bushings. This makes for an easier install due to not having to press out your OEM rubber bushings. The rubber mounts allows the engine / transmission to move which gives the feeling of a sloppy drivetrain. Our inserts limit the amount of drivetrain movement during on off throttle and braking conditions. The inserts will also give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the engine movement without the issue of Solid Mount Vibration. Installing our insert will also ensure your OEM mount does not break or become week from use.

- Smoother Shifting While Rev Matching
- Less Movement Under Acceleration and Braking
- 85A Durometer Bushings
- Limited Lifetime Warranty

Fits:
- Porsche 981 Boxster, Cayman Transmission Mount
- Porsche 911 991 Engine Mount
   
 
certified secure site
We accept Mastercard, Visa, American Express, and Discover