Home > Rear Differential Mounts
Sort By:
Page of 1
Torque Solution Rear Differential Mount Inserts: Mitsubishi Evolution VIII-IX 2003-2006 Torque Solution Solid Rear Differential Mount: Mitsubishi Evolution X MR & GSR 2008+ Torque Solution Solid Differential Bushing w/ Urethane Inserts: Mitsubishi Evolution X MR & GSR 2008+
MSRP$64.99
MSRP$64.99
MSRP$119.99
Torque Solution Rear Differential Mount Inserts
Applications: Mitsubishi Evolution VIII-IX 2003-2006

These Solid Polyurethane bushings are much harder compared to the OEM units. By replacing them with these harder Polyurethane units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-1000HP+ and 8sec e.t. torture tested
-75A durometer bushings
-Limited Lifetime Warranty

Torque Solution Rear Differential Mount
Applications: Mitsubishi Evolution X 2008+

The solid differential mount will eliminate movement of the rear end in the subframe. By replacing the rubber mount with this solid 6061 billet unit you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Reduces the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Road Race torture tested
-6061 anodized billet
-25% Lighter than Stock
-Limited Lifetime Warranty
Torque Solution Solid Rear Differential Mount w/ Inserts
Applications: Mitsubishi Evolution X GSR & MR

The solid differential mount will eliminate movement of the rear end in the subframe. By replacing the rubber mount with this solid 6061 billet unit you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

•Reduces the " CLUNK " when shifting hard
•Reduces wheel hop / traction loss
•Improved 60fts / e.t's
•Road Race torture tested
•6061 anodized billet
•25% Lighter than Stock
•LifeTime Warranty
Torque Solution Solid Differential Side Inserts: Mitsubishi Evolution X MR & GSR 2008+ Torque Solution Solid Differential Bushing w/ Billet Inserts: Mitsubishi Evolution X MR & GSR 2008+ Torque Solution Mustache Bar Bushings: Mitsubishi Evolution 8/9
MSRP$64.99
MSRP$119.99
MSRP$44.99
Torque Solution Solid Differential Side Inserts
Applications: Mitsubishi Evolution X GSR & MR

These 6061 Solid Billet bushings are much harder compared to the OEM units. By replacing them with these Solid Billet Inserts you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Anodized Black 6061 Billet
-Limited Lifetime Warranty
Torque Solution Solid Rear Differential Mount w/ Billet Inserts
Applications: Mitsubishi Evolution X GSR & MR

The solid differential mount will eliminate movement of the rear end in the subframe. By replacing the rubber mount with this solid 6061 billet unit you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Reduces the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Road Race torture tested
-6061 anodized billet
-25% Lighter than Stock
-Limited Lifetime Warranty


These Solid bushings are much harder compared to the OEM units. By replacing them with these harder units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-6061 Anodized Billet
-Limited Lifetime Warranty


Torque Solution Mustache Bar Inserts
Applications: Mitsubishi Evolution VIII-IX 2003-2006

These Solid Polyurethane bushings are much harder compared to the soft rubber OEM units. By replacing them with these harder Polyurethane units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts. These replace Mustache bar inserts only. Side diff inserts sold separately.

-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-1000HP+ and 8sec e.t. torture tested
-75A durometer bushings
-Limited Lifetime Warranty

Torque Solution Mustache Bar Eliminator w/ NO BUSHINGS: Mitsubishi Evo 7/8/9 2001-2006 Torque Solution Mustache Bar Eliminator w/ Solid Bushings: Mitsubishi Evo 7/8/9 2001-2006 Torque Solution Mustache Bar Eliminator w/ Urethane Bushings: Mitsubishi Evo 7/8/9 2001-2006
Our Price:$189.99
Our Price:$249.99
Our Price:$249.99
Torque Solution Mustache Bar Eliminator
Applications: Mitsubishi  Evolution VII-IX 2001-2006


The Torque Solution Mustache Bar Eliminator is designed to eliminate that annoying rear differential "clunk" under hard shifts from the rear of your car. Made from 100% billet 6061 aluminum and CNC machined for accurate tolerances.

*This piece requires SOLID OR URETHANE BUSHINGS!!! We are offering it without the bushings for those of you who may already have the bushings on your car and dont need them but keep in mind they are REQUIRED!!!

-Eliminates the " CLUNK " when shifting hard
-Drops 13lbs off the car
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-1000HP+ and 8sec e.t. torture tested
-Limited Lifetime Warranty

Torque Solution Mustache Bar Eliminator
Applications: Mitsubishi Evolution VII-IX 2001-2006


The Torque Solution Mustache Bar Eliminator is designed to eliminate that annoying rear differential "clunk" under hard shifts from the rear of your car. Made from 100% billet 6061 aluminum and CNC machined for accurate tolerances. This piece comes anodized black and includes two solid bushings for the side of the rear differential to allow even less differential movement and clunking.

-Eliminates the " CLUNK " when shifting hard
-Drops 13lbs off the car
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-1000HP+ and 8sec e.t. torture tested
-Limited Lifetime Warranty

Torque Solution Mustache Bar Eliminator
Applications: Mitsubishi Evolution VII-IX 2001-2006


The Torque Solution Mustache Bar Eliminator is designed to eliminate that annoying rear differential "clunk" under hard shifts from the rear of your car. Made from 100% billet 6061 aluminum and CNC machined for accurate tolerances. This piece comes anodized black and includes two Urethane bushings for the side of the rear differential to allow even less differential movement and clunking. The urethane bushings are less harsh and transmit less feedback into the cabin then the solid bushings.

-Eliminates the " CLUNK " when shifting hard
-Drops 13lbs off the car
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-1000HP+ and 8sec e.t. torture tested
-75a Polyurethane Bushings
-Limited Lifetime Warranty

Torque Solution Billet Rear Differential Mount Inserts: Mitsubishi Evolution VIII-IX 2003-2006
MSRP$59.99
Torque Solution Billet Rear Differential Mount Inserts
Applications: Mitsubishi Evolution VIII-IX 2003-2006

These billet bushings are solid compared to the OEM rubber units. By replacing them with these 6061 Billet Pieces you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-1000HP+ and 8sec e.t. torture tested
-6061 Anodized Billet
-Limited Lifetime Warranty

   
 
certified secure site
We accept Mastercard, Visa, American Express, and Discover