Home > Universal Fittings & Bungs
Sort By:
Page of 1
Torque Solution O2 Sensor Extender: Universal Torque Solution Stainless Steel O2 Sensor Bung: Universal Torque Solution Quick Connect Fitting Male 5/16" to -6 AN Female
MSRP$12.99
MSRP$5.99
MSRP$15.00
Torque Solution O2 Sensor Extender
Applications: Universal
 

On ODB-II vehicles (96+), the ECU has two O2 sensors for diagnostic purposes. The first O2 sensor is located before the Catalytic Converter. This O2 sensor is responsible for all the Air/Fuel tuning and is imperative to the operation of the vehicle.

 

This Steel O2 sensor extender is basically for keeping the O2 sensor out of exhaust pipe. These also work when running a hi flow cat or a test pipe. It's a very simple 10~15 mins installation, This extender will fit most O2 sensors with 18mm thread size.



-Improved Gas mileage
-Fixes CEL in most cases
-Life Time Warranty

Torque Solution Stainless Steel O2 Sensor Bung
Applications: Universal

Stainless Steel 18mm X 1.5 Weld-on 02 bung for adding Oxygen sensors to your exhaust.

-304 Stainless Steel
-Life Time Warranty
Torque Solution Billet Quick Connect Fitting
Applications: Universal 5/16 to -6AN
 
Quick connect fitting Male 5/16" size to -6 AN Female. Allows ease of transition from -6 AN to the newer O-ringed squeeze and release type fitting found on many newer FUEL systems and emissions devices.

-6061 Billet Aluminum

-Limited Lifetime Warranty

Torque Solution Billet 3" Shifter Extension: Subaru & All Manual Shifters 12x1.25 Thread Pitch Torque Solution Manual Shifter Boot Adapter: Honda Civic 01-09 / TSX 04-08 / RSX 02-06 All Torque Solution Map Sensor Adapter : Mitsubishi Evolution 8/9 2003-2006
MSRP$19.99
MSRP$16.99
MSRP$22.99
Torque Solution Billet 3" Shifter Extension
Applications: ALL 12x1.25 Shifters
 

Torque Solution Shifter Extensions are used to raise the gear shift knob to provide a better arm angle for more precise and comfortable shifting. Longer shift levers are commonly used in race applications where every shift matters.
 


-Black Anodized 6061 Billet Aluminum
-Installs in 2 Minutes

-Limited Lifetime Warranty

Torque Solution Honda / Acura Manual Shifter Boot Adapter
Application: Honda Civic 01-09 / TSX 04-08 / RSX 02-06 All

 
Torque Solution shift boot adapter is perfect to give you that flush and clean shifter install you have been looking for. Eliminates the gap between the shift boot and knob, so you don't have to see your metal shifter. Works with all types of OEM and aftermarket shift knobs. It's threaded to fit your stock or aftermarket short shifter.
 
  
- Cnc machined 6061-T6 billet aluminum
- 10x1.5mm Thread
- Black Anodized
- Installs in under 5 minutes
- Limited Lifetime Warranty
Torque Solution Map Sensor Adapter
Applications: Mitsubishi Evolution 8/9 2003-2006

Torque Solution Evo map sensor adapter allows you to install your OEM Evo Map Sensor onto a manifold that does not have OEM MAP provisions. One side is threaded in 1/4 NPT for a hose barb and the map sensor bolts directly to the back side.


-6061 Billet Aluminum
-Simple Installation of OEM MAP Sensor
-Threaded Hose Barn Included
-Limited Lifetime Warranty
Torque Solution Billet Reverse Lockout Collar: Subaru / Universal 12x1.25 Torque Solution Billet Cam Gear Alignment Tool: Mitsubishi Evolution / Eclipse All 4G63 Engines Torque Solution Stainless Steel 1/8" NPT Plug: Universal Single Plug
Our Price:$15.99
Our Price:$39.99
Our Price:$2.49
Torque Solution Billet Reverse Lockout Collar Adapter
Application: Universal 12x1.25

Torque Solution Billet Shifter collar for reverse lockout cars was designed for you to be able to use a standard shift knob on your reverse lockout shifter without the ugly gap in between. Installs in minutes for a nice clean look.

- Billet 6061 Aluminum
- Black Anodized
- Easy Install
- Direct Fitment
- Limited Lifetime Warranty
Torque Solution Cam Gear Lock Tool
Applications:
Mitsubishi Evolution / Eclipse All 4G63 Engines

Torque Solution Cam Gear Alignment Tool allows you to lock your cam gears in place and make your timing belt replacement much easier.

-6061 Billet Aluminum
-Black Anodized
-Limited Lifetime Warranty


1987-199x Mitsubishi L200/Mighty Max

1992–2006 Mitsubishi Lancer Evolution

1993–1998 Mitsubishi Pajero

1994–1998 Mitsubishi RVR

1982–1987 Mitsubishi Starion

1988 Mitsubishi Tredia

2004–present Brilliance BS6

1983–1992 Dodge Colt Vista

1987-1989 Dodge Ram 50

1989-1992 Eagle Vista Wagon

1990–1998 Eagle Talon

1987-1988 Hyundai Stellar

1992-1995 Hyundai Elantra

1989-2005 Hyundai Sonata

2000-2005 Kia Optima

1990–1994 Plymouth Laser

1996–1999 Proton Perdana

Torque Solution Stainless Steel 1/8" NPT Plug
Applications: Universal

Stainless Steel 1/8" NPT. Recessed hex head for a nice clean look.

-304 Stainless Steel
-Life Time Warranty
Torque Solution Stainless Steel 1/8" NPT Plug: Universal 5 Pack Torque Solution Stainless Steel 1/8" NPT Plug: Universal 10 Pack Torque Solution O2 Sensor Extender: Universal 90° Degree
Our Price:$11.99
Our Price:$22.99
MSRP$24.99
Torque Solution Stainless Steel 1/8" NPT Plug
Applications: Universal 5 Pack

Stainless Steel 1/8" NPT. Recessed hex head for a nice clean look.

-304 Stainless Steel
-Life Time Warranty
Torque Solution Stainless Steel 1/8" NPT Plug
Applications: Universal 10 Pack

Stainless Steel 1/8" NPT. Recessed hex head for a nice clean look.

-304 Stainless Steel
-Life Time Warranty
Torque Solution O2 Sensor Extender
Applications: Universal 90° Degree

On ODB-II vehicles (96+), the ECU has two O2 sensors for diagnostic purposes. The first O2 sensor is located before the Catalytic Converter and is responsible for all the Air/Fuel tuning and is imperative to the operation of the vehicle. The second O2 sensor is there to make sure the catalytic converter is doing it's job properly. By Utilizing the Torque Solution 90 Degree O2 Sensor Extender to move the second O2 out of the exhaust stream on modified vehicles it will reduce / prevent the risk of throwing a CEL.


- 90° Degree Angle
- Includes Locking Nut for 360 Degree Mounting
- Fits all M18x1.5 oxygen sensors
- Zinc Coated
- Improved Gas mileage
- Reduces / Prevents CEL
- Simple intallation
- Limited Lifetime Warranty

Torque Solution O2 Sensor Extender: Universal 45° Degree Torque Solution Brass 1/8" NPT Fitting: Universal 90 Degree Barb Torque Solution Brass 1/8" NPT Fitting: Universal Straight Barb
MSRP$24.99
Our Price:$4.99
Our Price:$3.99
Torque Solution O2 Sensor Extender: Universal 45° Degree Torque Solution Brass 1/8" NPT Fitting: Universal 90 Degree Barb Torque Solution Brass 1/8" NPT Fitting: Universal 90 Degree Barb
Torque Solution O2 Sensor Extender
Applications: Universal 45° Degree

On ODB-II vehicles (96+), the ECU has two O2 sensors for diagnostic purposes. The first O2 sensor is located before the Catalytic Converter and is responsible for all the Air/Fuel tuning and is imperative to the operation of the vehicle. The second O2 sensor is there to make sure the catalytic converter is doing it's job properly. By Utilizing the Torque Solution 45 Degree O2 Sensor Extender to move the second O2 out of the exhaust stream on modified vehicles it will reduce / prevent the risk of throwing a CEL.


- 45° Degree Angle
- Includes Locking Nut for 360 Degree Mounting
- Fits all M18x1.5 oxygen sensors
- Zinc Coated
- Improved Gas mileage
- Reduces / Prevents CEL
- Simple intallation
- Limited Lifetime Warranty

Torque Solution Brass 1/8" NPT Fitting
Applications: Universal 90 Degree Barb

- 1/8" NPT
- Accepts 3-3.5mm ID Hose
- Brass
- Limited Lifetime Warranty
Torque Solution Brass 1/8" NPT Fitting
Applications: Universal Straight Barb

- 1/8" NPT
- Accepts 3-3.5mm ID Hose
- Brass
- Limited Lifetime Warranty
Torque Solution Stainless Steel Denso MAF Flange: For 3" Pipe Torque Solution Aluminum Denso MAF Flange: For 3" Pipe Torque Solution Aluminum Denso MAF Flange: For 3" Pipe
MSRP$39.99
MSRP$25.99
MSRP$25.99
Torque Solution Billet Stainless Steel Denso MAF Flange
Application: For 3" Pipe

Contoured for 3" pipe and CNC machined from Stainless Steel. Fits the following Air Flow Sensors: Denso 22680AA310 and compatible interchange sensor part #'s 197400-2090, 74-50040, 5S2954 and SU6401, Denso 22204-0D010, non OEM sensor 22204-15010. Below is a partial list of cars that use these sensors.

- CNC machined Stainless Steel
- Coutoured for 3" pipe
- Includes 2 Phillips Pan Head Screws
Torque Solution Billet Stainless Steel Denso MAF Flange
Application: For 3" Pipe

Contoured for 3" pipe and CNC machined from 6061 Aluminum. Fits the following Air Flow Sensors: Denso 22680AA310 and compatible interchange sensor part #'s 197400-2090, 74-50040, 5S2954 and SU6401, Denso 22204-0D010, non OEM sensor 22204-15010. Below is a partial list of cars that use these sensors.

- CNC machined 6061 Aluminum
- Coutoured for 3" pipe
- Includes 2 Phillips Pan Head Screws
Torque Solution Billet Stainless Steel Denso MAF Flange
Application: For 3" Pipe

Contoured for 3" pipe and CNC machined from 6061 Aluminum. Fits the following Air Flow Sensors: Denso 22680AA310 and compatible interchange sensor part #'s 197400-2090, 74-50040, 5S2954 and SU6401, Denso 22204-0D010, non OEM sensor 22204-15010. Below is a partial list of cars that use these sensors.

- CNC machined 6061 Aluminum
- Coutoured for 3" pipe
- Includes 2 Phillips Pan Head Screws
Torque Solution Stainless Steel Denso MAF Flange: For 3" Pipe Torque Solution Weld On AN Flare Bung: Male -10 AN Aluminum Universal
MSRP$39.99
MSRP$5.99
Weld On AN Flare Bung
Torque Solution Billet Stainless Steel Denso MAF Flange
Application: For 3" Pipe

Contoured for 3" pipe and CNC machined from Stainless Steel. Fits the following Air Flow Sensors: Denso 22680AA310 and compatible interchange sensor part #'s 197400-2090, 74-50040, 5S2954 and SU6401, Denso 22204-0D010, non OEM sensor 22204-15010. Below is a partial list of cars that use these sensors.

- CNC machined Stainless Steel
- Coutoured for 3" pipe
- Includes 2 Phillips Pan Head Screws
Torque Solution Weld On AN Flare Bung
Applications: Male -10 AN Aluminum Universal

Torque Solution Weld Bungs are perfect to be used with aluminum Valve Cover Breather, Radiators, Oil Pans, Fuel Cell, Cylinder Heads, Intake Manifolds, Dry Sump, custom tank fabrication or any other project that would require weld bungs.

- 6061 Billet Aluminum
- Male -10 AN Flare
- 5/8" OD Stepped Ledge
- 7/8" Overall OD
- Limited Lifetime Warranty
   
 
certified secure site
We accept Mastercard, Visa, American Express, and Discover