Home > Mounts > Transmission Mounts
Sort By:
Page of 2
Torque Solution Billet Aluminum Transmission Mount: Dodge Neon SRT-4 2003-05 Torque Solution Billet Aluminum 5 Speed Transmission Mount: Mitsubishi Evolution VII-IX 2001-2006 Torque Solution Billet Aluminum 6 speed Transmission Mount: Mitsubishi Evolution VII-IX 2001-2006
MSRP$110.00
MSRP$154.99
MSRP$154.99
Dodge Neon SRT-4 Transmission Mount Mitsubishi Evolution VII-IX  5 Speed Transmission Mount Mitsubishi Evolution VII-IX 6 speed Transmission Mount
Torque Solution Engine Mount
Applications: Dodge Neon SRT-4 2000-2005
 
This mount replaces existing OEM transmission mount.The transmission mount is made out of high grade billet aluminum material with urethane material for the bushings. With the addition of the is mount you will see and feel an improvement with wheel hop being reduced and better traction. This is the lightest transmission mount on the market and can be seen on the fastest World Challenge SRT-4's in the world. Get what the pro's have at a price you can afford!
 
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•Street and track torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty

Torque Solution Transmission Mount
Applications: Mitsubishi Evolution VII-IX 2001-2006

All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM transmission mount. This mount can be seen in some of the fastest evo's on the street and at the track! For best results use with Torque Solution's passenger side engine mount, front engine mount, and rear engine mount.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty
Torque Solution Mitsubishi EVO (VII-IX) 6spd transmission mount. This mount will keep transmission movements down to a minimum. This mount is perfect for both daily street driven set-up's to full blown racing applications and everything in between. Same great quality and reliability that can be seen in all our mounts and this one is no exception.

  • Reduced 60ft's
  • Reduced E.T.'s
  • Improved traction
  • Lightweight billet material
  • Black anodizing
  • 1000HP+ and 8sec e.t. torture tested
Torque Solution Billet Aluminum Pitch Stop Tranny Mount (Black): Subaru Torque Solution Billet Aluminum Transmission Mount: 2003-2009 Nissan 350z Torque Solution Transmission Mount: Audi A3 ALL
MSRP$97.99
MSRP$109.00
MSRP$199.00
Subaru Solid Billet Trans Mount
Torque Solution Pitch Stop Mount
Applications: Subaru Sti Wrx Baja Impreza Legacy Outback Forester Tribeca

The Subaru Pitch Control Mount is found under the factory top-mount intercooler (installation is simple) between the fire wall and the front end of the transmission. The pitch mount is designed to produce crisper gear shifts by preventing the front end of the transmission from pitching up or down, forward and back.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Transmission Mount
Applications: 2003-2009 Nissan 350z

This mount replaces existing OEM transmission mount. The transmission mount is made out of high grade billet aluminum material with urethane material for the bushings. With the addition of this mount you will see and feel an improvement with wheel hop being reduced and better traction. This mount will also aid in chassis stability allowing faster lap times with less transmission slop in the drive line. You will notice much more precise shifting in on/off throttle situations like in Road Racing & Autocross..

-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Limited Lifetime Warranty

Torque Solution Transmission Mount
Applications: Audi A3 ALL YEARS
 
The Torque Solution Transmission mount is made from high grade 6061 billet aluminum material. The factory mount is a rubber material that cracks and contains a viscous oil and is prone to failure leaving fluid all over the engine bay. Torque Solution mounts come standard w/ Limited Lifetime Warranty polyurethane bushings giving you peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

*Will fit all Audi/VW vehicles with transverse mounted 2.0T FSI and TSI engines.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Real World Torture Tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Transmission Mount: Audi TT MK2 2.0T & 3.2L Torque Solution Transmission Mount: Volkswagen Jetta / Golf MKV 2.0T ALL Torque Solution Transmission Mount: Volkswagen Golf VI 2.0T 2010-2012
MSRP$199.00
MSRP$199.00
MSRP$199.00
Torque Solution Transmission Mount
Applications: Audi MK2 TT 2.0T & 3.2L
 
The Torque Solution Transmission mount is made from high grade 6061 billet aluminum material. The factory mount is a rubber material that cracks and contains a viscous oil and is prone to failure leaving fluid all over the engine bay. Torque Solution mounts come standard w/ Limited Lifetime Warranty polyurethane bushings giving you peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

*Will fit all Audi/VW vehicles with transverse mounted 2.0T FSI and TSI engines.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Real World Torture Tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Transmission Mount
Applications: Volkswagen Jetta / Golf MKV 2.0T ALL
The Torque Solution Transmission mount is made from high grade 6061 billet aluminum material. The factory mount is a rubber material that cracks and contains a viscous oil and is prone to failure leaving fluid all over the engine bay. Torque Solution mounts come standard w/ Limited Lifetime Warranty polyurethane bushings giving you with peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

*Will fit all Audi/VW vehicles with transverse mounted 2.0T FSI and TSI engines.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Real World Torture Tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Transmission Mount
Applications: Volkswagen Golf MKVI 2.0T ALL
 
The Torque Solution Transmission mount is made from high grade 6061 billet aluminum material. The factory mount is a rubber material that cracks and contains a viscous oil and is prone to failure leaving fluid all over the engine bay. Torque Solution mounts come standard w/ Limited Lifetime Warranty polyurethane bushings giving you with peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

*Will fit all Audi/VW vehicles with transverse mounted 2.0T FSI and TSI engines.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Real World Torture Tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Transmission Mount: Volkswagen Passat B6 2006-2010 Torque Solution Transmission Mount: Volkswagen Golf MK5 & MK6 R32 Torque Solution Transmission Mount: Volkswagen Jetta / Golf MKV 2.5L 2006-2009
MSRP$199.00
MSRP$199.00
MSRP$199.00
Torque Solution Transmission Mount
Applications: Volkswagen Passat B6 2006-2010
 
The Torque Solution Transmission mount is made from high grade 6061 billet aluminum material. The factory mount is a rubber material that cracks and contains a viscous oil and is prone to failure leaving fluid all over the engine bay. Torque Solution mounts come standard w/ Limited Lifetime Warranty polyurethane bushings giving you with peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

*Will fit all Audi/VW vehicles with transverse mounted 2.0T FSI and TSI engines.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Real World Torture Tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Transmission Mount
Applications: Volkswagen Golf MK5 R32 VR6 3.2L & MK6 R (2012-2013) 2.0T FSI
The Torque Solution Transmission mount is made from high grade 6061 billet aluminum material. The factory mount is a rubber material that cracks and contains a viscous oil and is prone to failure leaving fluid all over the engine bay. Torque Solution mounts come standard w/ Limited Lifetime Warranty polyurethane bushings giving you with peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

*Will fit all Audi/VW vehicles with transverse mounted 2.0T FSI and TSI engines.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Real World Torture Tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Transmission Mount
Applications: Volkswagen Jetta / Golf MKV 2.5L 2006-2009


The Torque Solution Transmission mount is made from high grade 6061 billet aluminum material. The factory mount is a rubber material that cracks and contains a viscous oil and is prone to failure leaving fluid all over the engine bay. Torque Solution mounts come standard w/ Limited Lifetime Warranty polyurethane bushings giving you with peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

*Will fit all Audi/VW vehicles with transverse mounted 2.0T FSI and TSI engines. Fits 2.5L 3 Bolt transverse mount only.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Real World Torture Tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Billet Transmission Mounts: Porsche Boxster 986/987 1997+ Torque Solution Engine & Transmission Mount Kit: Audi A3 ALL & TT MK2 2.0T & 3.2L Torque Solution Engine & Transmission Mount Kit: Volkswagen Jetta, Golf, Passat
MSRP$399.99
MSRP$379.99
MSRP$379.99
Torque Solution Transmission Mount Kit
Applications: Porsche Boxster 986/987 1997+

Torque Solution Porsche Transmission mounts are designed to limit the amount of Engine movement under hard acceleration and braking. The factory mounts allow the engine to move which gives the feeling of a sloppy drivetrain. The mounts will give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the engine movement without the issue of Solid Mount Vibration. The next issue with Solid mounts is the transmission of noise from the chassis to the knock sensor on the engine which can result in a tuning nightmare. These mounts will not affect knock sensor like solid mounts do..

*Polyurethane Pictured in BLUE to show design. You will receive in all black.

- Reduces Engine Movement
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty
Torque Solution Engine & Transmission Mount kit
Applications: Audi A3 ALL & TT MK2 2.0T
Torque Solution engine & transmission mounts are made from high grade 6061 billet aluminum material. The factory mount is a rubber material that cracks and contains a viscous oil and is prone to failure leaving fluid all over the engine bay. Torque Solution mounts come standard w/ Limited Lifetime Warranty polyurethane bushings giving you peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

*Will fit all Audi/VW vehicles with transverse mounted 2.0T FSI and TSI engines.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Real World Torture Tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty
Torque Solution Engine & Transmission Mount kit
Applications: Volkswagen Jetta, Golf, Passat


Torque Solution engine & transmission mounts are made from high grade 6061 billet aluminum material. The factory mount is a rubber material that cracks and contains a viscous oil and is prone to failure leaving fluid all over the engine bay. Torque Solution mounts come standard w/ Limited Lifetime Warranty polyurethane bushings giving you peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

*Will fit all Audi/VW vehicles with transverse mounted 2.0T FSI and TSI engines.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Real World Torture Tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty


Application List
VW Tiguan 2.0 TSI 2009-2011
VW Tiguan 2.0 TSI 2012+
VW Passat B6 2.0T FSI 2006-2011
VW Jetta MK5 2.0 TSI 2005.5-2010
VW Jetta MK5 2.0T FSI 2005.5-2010
VW Jetta MK6 Sedan 2.0T GLI 2011-2014
VW Jetta MK6 Sportwagen 2.0 TSI 2010-2014
VW Golf/GTI/Rabbit MK5 2.0 TSI 2006-2009
VW Golf/GTI/Rabbit MK5 2.0T FSI 2006-2009
VW Golf/GTI/Rabbit MK6 2.0T 2010-2014
VW Eos 2.0 TSI ALL
VW Eos 2.0T FSI ALL
VW CC 2.0 TSI 2009+
VW Beetle 2.0 TSI 2012+
VW Golf R MK6 2.0T FSI 2012-2013
Torque Solution Billet Aluminum Transmission Mount: 2003-2007 Infiniti G35 Torque Solution Billet Aluminum Transmission Mount: 92-95 Honda Civic, 94-01 Integra, 93-97 Del Sol Torque Solution Billet Transmission Mount: Mitsubishi Eclipse / Talon 2G DSM AWD 95-99
MSRP$109.00
MSRP$99.99
MSRP$154.99
Torque Solution Billet Aluminum Transmission Mount: 92-95 Honda Civic, 94-01 Integra, 93-97 Del Sol
Torque Solution Transmission Mount
Applications: 2003-2007 Infiniti G35

This mount replaces existing OEM transmission mount. The transmission mount is made out of high grade billet aluminum material with urethane material for the bushings. With the addition of this mount you will see and feel an improvement with wheel hop being reduced and better traction. This mount will also aid in chassis stability allowing faster lap times with less transmission slop in the drive line. You will notice much more precise shifting in on/off throttle situations like in Road Racing & Autocross..
 
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Limited Lifetime Warranty

Torque Solution Transmission Mount
Applications: 92-95 Honda Civic, 94-01 Integra, 93-97 Del Sol
The Honda Right Side mount is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM Right side engine mount. This mount can be seen in some of the fastest Hondas on the street and at the track!

*Hydraulic Manual Transmission ONLY
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Limited Lifetime Warranty

Torque Solution Transmission Mount
Applications: Mitsubishi Eclipse / Talon 2G DSM AWD 95-99
 
All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM transmission mount. This mount can be seen in some of the fastest DSM's on the street and at the track! For best results use with Torque Solution's passenger side engine mount, front engine mount, and rear engine mount.
 
- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty

 
 
Torque Solution Billet Transmission Mount: Mitsubishi Eclipse / Talon 1G DSM Manual AWD 90-94 Torque Solution Billet Aluminum Auto to Manual Transmission Swap Mount: Acura Integra 94-01 Torque Solution Billet Aluminum Auto to Manual Transmission Swap Mount: Honda Civic 1992-1995
MSRP$154.99
MSRP$109.99
MSRP$109.99
Torque Solution Transmission Mount
Applications: Mitsubishi Eclipse / Talon 1G DSM AWD 90-94
 
All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM transmission mount. This mount can be seen in some of the fastest DSM's on the street and at the track! For best results use with Torque Solution's passenger side engine mount, front engine mount, and rear engine mount.
 
- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty

 
 
Torque Solution Auto to Manual Transmission Swap Mount
Applications: Acura Integra 94-01

The Honda Auto to Manual Transmission Mount is designed to easily convert your automatic transmission Integra to a manual transmission. The mount will also produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins.


*Hydraulic Transmission ONLY


-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Limited Lifetime Warranty

Torque Solution Auto to Manual Transmission Swap Mount
Applications: Honda Civic 1992-1995

The Honda Auto to Manual Transmission Mount is designed to easily convert your automatic transmission EG Civic to a manual transmission. The mount will also produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins.


*Hydraulic Transmission ONLY


-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Limited Lifetime Warranty

Torque Solution Billet Aluminum Transmission Mount: Honda Civic 96-00 EK B or D-Series Torque Solution Billet Aluminum Transmission Mount: Acura RSX 2002-2006 DC5 Torque Solution Billet Aluminum Transmission Mount: Honda Civic Si 2002-2005
MSRP$109.99
MSRP$139.99
MSRP$139.99
Torque Solution Billet Transmission Mount
Applications: Honda Civic 96-00 EK B or D-Series

Our Honda Civic 96-00 B-Series transmission mount is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the OEM Right side engine mount. This mount can be seen in some of the fastest Hondas on the street and at the track!



*Hydraulic Transmission ONLY


-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Limited Lifetime Warranty

Torque Solution Billet Aluminum Transmission Mount
Applications: Acura RSX 2002-2006 DC5 Base & Type-S

Our Transmission Mount is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Steel Mounting Bracket
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Billet Aluminum Transmission Mount
Applications: Honda Civic Si 2002-2005

Our Transmission Mount is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Steel Mounting Bracket
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Torque Solution Billet Aluminum Pitch Stop Tranny Mount (Blue): Subaru Torque Solution Billet Aluminum Pitch Stop Tranny Mount (Red): Subaru Torque Solution Billet Aluminum Pitch Stop Tranny Mount (Silver): Subaru
MSRP$97.99
MSRP$97.99
MSRP$97.99
Subaru Billet Aluminum Pitch Stop Tranny Mount: Subaru Billet Aluminum Pitch Stop Tranny Mount: Subaru Billet Aluminum Pitch Stop Tranny Mount:
Torque Solution Pitch Stop Mount
Applications: Subaru Sti Wrx Baja Impreza Legacy Outback Forester Tribeca

The Subaru Pitch Control Mount is found under the factory top-mount intercooler (installation is simple) between the fire wall and the front end of the transmission. The pitch mount is designed to produce crisper gear shifts by preventing the front end of the transmission from pitching up or down, forward and back.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Blue anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Pitch Stop Mount
Applications: Subaru Sti Wrx Baja Impreza Legacy Outback Forester Tribeca

The Subaru Pitch Control Mount is found under the factory top-mount intercooler (installation is simple) between the fire wall and the front end of the transmission. The pitch mount is designed to produce crisper gear shifts by preventing the front end of the transmission from pitching up or down, forward and back.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Red anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Pitch Stop Mount
Applications: Subaru Sti Wrx Baja Impreza Legacy Outback Forester Tribeca

The Subaru Pitch Control Mount is found under the factory top-mount intercooler (installation is simple) between the fire wall and the front end of the transmission. The pitch mount is designed to produce crisper gear shifts by preventing the front end of the transmission from pitching up or down, forward and back.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Silver anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Billet Transmission Mounts: Chevrolet Corvette C6 2005-2013 Torque Solution Billet Engine & Transmission Mounts Kit: Chevrolet Corvette C6 2005-2013 Torque Solution Billet Aluminum Pitch Stop Tranny Mount (Purple): Subaru
MSRP$319.99
MSRP$589.99
MSRP$97.99
Torque Solution Billet Transmission Mounts: Chevrolet Corvette C6 2005-2013 Torque Solution Billet Engine & Transmission Mounts Kit: Chevrolet Corvette C6 2005-2013 Subaru Billet Aluminum Pitch Stop Tranny Mount:
Torque Solution Billet Transmission Mounts
Applications: Chevrolet Corvette C6 2005-2013 (all models)


Torque Solution Billet Transmission Mounts for the Chevrolet Corvette C6 2005-2013 are made out of high grade billet aluminum material and stainless steel. You can rest assure that with our superior material and design you will get optimal performance for years and decades to come. The mounts feature 75 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration, cornering, and braking. Weather you have a street, strip or autox/road race built car, Torque Solution mounts will deliver the performance you need under all conditions.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black Anodized w/ "TS" Logo
- Stainless Steel Studs and Bracket
- 75A durometer bushings
- Limited Lifetime Warranty
Torque Solution Billet Engine & Transmission Mounts Kit
Applications: Chevrolet Corvette C6 2005-2013 (all models)


Torque Solution Billet Engine & Transmission Mounts for the Chevrolet Corvette C6 2005-2013 are made out of high grade billet aluminum material and stainless steel. You can rest assure that with our superior material and design you will get optimal performance for years and decades to come. The mounts feature 75 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration, cornering, and braking. Weather you have a street, strip or autox/road race built car, Torque Solution mounts will deliver the performance you need under all conditions.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black Anodized w/ "TS" Logo
- Stainless Steel Studs and Bracket
- 75A durometer bushings
- Limited Lifetime Warranty
Torque Solution Pitch Stop Mount
Applications: Subaru Sti Wrx Baja Impreza Legacy Outback Forester Tribeca

The Subaru Pitch Control Mount is found under the factory top-mount intercooler (installation is simple) between the fire wall and the front end of the transmission. The pitch mount is designed to produce crisper gear shifts by preventing the front end of the transmission from pitching up or down, forward and back.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Purple anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
   
 
certified secure site
We accept Mastercard, Visa, American Express, and Discover