Home > Inserts
Choose a sub category:
Engine Mount Inserts Pendulum (Dog Bone) Billet Insert
Radiator Mount Inserts Rear Differential Inserts
Rear Mount Inserts Rear Subframe Inserts
Side Mount Inserts Solid Differential Side Inserts
Subframe Bushing Inserts Subframe Collar Insert
Transmission Mount Inserts Upper Differential Mount Inserts
Sort By:
Page of 4
Torque Solution Engine Mount Inserts: Dodge Caliber 2006-11 Torque Solution Engine Mount Inserts: Mitsubishi Evolution X 2008-14 Torque Solution Engine Mount Inserts: Dodge Caliber 2006-11
MSRP$54.99
MSRP$54.99
MSRP$108.99
Dodge Caliber Engine Mount Inserts Mitsubishi Evolution X Engine Mount Inserts Dodge Caliber Engine Mount Inserts
Torque Solution Engine Mount Incerts
Applications: Dodge Caliber 2006-2011
Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM Dodge Caliber engine mounts.Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution. Fits both drivers side and passenger side.
  • Eliminates wheel hop / traction loss
  • Improved 60fts / e.t's Street and track torture tested
  • 75A durometer bushings
  • Life Time Warranty
Torque Solution Engine Mount Inserts
Applications: Mitsubishi Evolution X 2008-2014


Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM EVO X engine mounts. Made from 75a durometer polyurethane. Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution. Fits both drivers side and passenger side.


- Eliminates wheel hop / traction loss
-
Improved 60fts / e.t's Street and track torture tested
-
75A durometer bushings
-
Limited Lifetime Warranty
Torque Solution Engine Mount Incerts
Applications:
Dodge Caliber 2006-2011

Torque Solution is proud to announce our new billet engine mounts for the Dodge Caliber. These mounts are made of high quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high grade polyurethane material. These combination's of materials and measurements allow for unmatched performance and reliability.For street and race applications. Some vibration noticeable..

•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Street and track torture tested
•75A durometer bushings
•Life Time Warranty
Torque Solution Engine Mount Inserts: Mitsubishi Evolution X 2008-2014 Torque Solution Engine Mount Inserts: Mitsubishi Ralliart Gts 2008+ Torque Solution Engine Mount Inserts: Mitsubishi Ralliart Gts 2008-11
MSRP$104.99
MSRP$54.99
MSRP$104.99
Evolution X Engine Mount Inserts Mitsubishi Ralliart Gts Engine Mount Inserts Mitsubishi Ralliart Engine Mount Inserts
Torque Solution Engine Mount Insert
Applications: Mitsubishi Evolution X 2008-2014

Torque Solution includes 2 urethane bushings and a sleeve for the PASSENGER side and 2 urethane bushings and a sleeve for the DRIVER side. Upgrading your stock rubber bushings to urethane bushings will help reduce engine movement and wheel hop. This means you receive better traction, which will improve your 60ft and 1/4 mile time. Affordable price, easy install, and most importantly you'll see and feel the advantages.



- Eliminates wheel hop / traction loss
-
Improved 60fts / e.t's Street and track torture tested
-
75A durometer bushings
-
Life Time Warranty
Torque Solution Engine Mount Insert
Applications: Mitsubishi Ralliart Gts 2008-2011
 
Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM Dodge Caliber engine mounts.Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution. Fits both drivers side and passenger side.
  • Eliminates wheel hop / traction loss
  • Improved 60fts / e.t's Street and track torture tested
  • 75A durometer bushings
  • Life Time Warranty

Torque Solution engine mount insert combo for the Lancer Ralliart. Kit includes inserts and sleeves for both passenger and driver side engine mount.

  • Reduced 60ft's
  • Reduced e.t.'s
  • Improved traction
  • 60 durometer urethane
  • Steel sleeves
  • Easy installation
Torque Solution Engine Mount Inserts: Mitsubishi Lancer 2008-15 Torque Solution Engine Mount Inserts: Mitsubishi Lancer 2008-11 Torque Solution Engine Mount Inserts: Mitsubishi Lancer Sportback 2008-11
MSRP$54.99
MSRP$104.99
MSRP$54.99
Lancer Engine Mount Inserts Lancer Engine Mount Inserts Mitsubishi Lancer Sportback Engine Mount Inserts
Torque Solution engine mount inserts for the Mitsubishi Lancer. Inserts can be placed on the passenger side or driver side engine mount.

  • Reduce engine movement
  • Improved 60fts
  • Improved traction
  • 60 durometer urethane
  • Improved e.t.'s
  • Easy installation
Torque Solution engine mount insert combo for the Lancer. Kit includes inserts and sleeves for both passenger and driver side engine mount.

  • Reduced 60ft's
  • Reduced e.t.'s
  • Improved traction
  • 60 durometer urethane
  • Steel sleeves
  • Easy installation
Torque Solution Engine Mount Incert
Applications: Mitsubishi Lancer Sportback 2008-2011 
Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM EVO X engine mounts. Made from 70 durometer polyurethane. Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution. Fits both drivers side and passenger side.
  • Eliminates wheel hop / traction loss
  • Improved 60fts / e.t's Street and track torture tested
  • 70A durometer bushings
  • Life Time Warranty
Torque Solution Engine Mount Inserts: Mitsubishi Lancer Sportback 2008-2011 Torque Solution Rear Differential Mount Inserts: Mitsubishi Evolution VIII-IX 2003-2006 Torque Solution Driver / Passenger Engine Mount Inserts : Mitsubishi Evolution 5/6/7/8/9
MSRP$104.99
MSRP$64.99
MSRP$59.99
Mitsubishi Lancer Sportback Engine Mount Inserts
Torque Solution Engine Mount Incert
Applications: Mitsubishi Lancer Sportback 2008-2011
 
Torque Solution includes 2 urethane bushings and a sleeve for the PASSENGER side and 2 urethane bushings and a sleeve for the DRIVER side. Upgrading your stock rubber bushings to urethane bushings will help reduce engine movement and wheel hop. This means you receive better traction, which will improve your 60ft and 1/4 mile time. Affordable price, easy install, and most importantly you'll see and feel the advantages.
 
  • Eliminates wheel hop / traction loss
  • Improved 60fts / e.t's Street and track torture tested
  • 75A durometer bushings
  • Life Time Warranty

Torque Solution Rear Differential Mount Inserts
Applications: Mitsubishi Evolution VIII-IX 2003-2006

These Solid Polyurethane bushings are much harder compared to the OEM units. By replacing them with these harder Polyurethane units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-1000HP+ and 8sec e.t. torture tested
-75A durometer bushings
-Limited Lifetime Warranty

Torque Solution Driver / Passsenger Engine Mount Inserts
Applications: Mitsubishi Evolution 5/6/7/8/9

Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM EVO 8/9 engine mounts. Made from 75a durometer polyurethane. Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution. Fits Drivers side housing and Transmission Side..

Includes 1 pair of bushings for either Cam Side of Engine or Trans Side.. If you need both you must order Qty 2.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-600HP+ and 9sec e.t. torture tested
-75A durometer bushings
-Life Time Warranty
Torque Solution Front Engine Mount Inserts : Mitsubishi Evolution 8/9 2003-2006 Torque Solution Radiator Mount w/ Insert (Red) : Mitsubishi Evolution 7/8/9 Torque Solution Radiator Mount w/ Insert ( Black ) : Mitsubishi Evolution 7/8/9
MSRP$44.99
MSRP$17.99
MSRP$17.99
Torque Solution Front Engine Mount Inserts
Applications: Mitsubishi Evolution 8/9 2003-2006

Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM EVO 8/9 engine mounts. Made from 75a durometer polyurethane. Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a Limited Lifetime Warranty through Torque Solution. Fits OEM Front Mount Housing..


-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-600HP+ and 9sec e.t. torture tested
-75A durometer bushings
-Life Time Warranty
Torque Solution Radiator Mount w/ Insert
Applications: Mitsubishi Evolution VII-IX 2001-2006
Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job..

*Priced Individually
-Made out of lightweight aluminum
-Stainless Hardware Included
-75% lighter than stock
-Black Anodized
-New Oem Insert
-Will not Rust
-Limited Lifetime Warranty
Torque Solution Radiator Mount w/ Insert
Applications: Mitsubishi Evolution VII-IX 2001-2006
Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job..

*Priced Individually
-Made out of lightweight aluminum
-Stainless Hardware Included
-75% lighter than stock
-Black Anodized
-New Oem Insert
-Will not Rust
-Limited Lifetime Warranty
Torque Solution Urethane Differential Inserts: Mitsubishi Evolution X MR & GSR 2008+ Torque Solution Solid Differential Bushing w/ Urethane Inserts: Mitsubishi Evolution X MR & GSR 2008+ Torque Solution Radiator Mount w/ Insert (Silver): Mitsubishi Evolution 7/8/9
MSRP$54.99
MSRP$119.99
MSRP$17.99
Torque Solution Rear Differential Mount Inserts
Applications: Mitsubishi Evolution X GSR & MR

These Solid Polyurethane bushings are much harder compared to the OEM units. By replacing them with these harder Polyurethane units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-95A durometer bushings
-Limited Lifetime Warranty
Torque Solution Solid Rear Differential Mount w/ Inserts
Applications: Mitsubishi Evolution X GSR & MR

The solid differential mount will eliminate movement of the rear end in the subframe. By replacing the rubber mount with this solid 6061 billet unit you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

•Reduces the " CLUNK " when shifting hard
•Reduces wheel hop / traction loss
•Improved 60fts / e.t's
•Road Race torture tested
•6061 anodized billet
•25% Lighter than Stock
•LifeTime Warranty
Torque Solution Radiator Mount w/ Insert
Applications: Mitsubishi Evolution VII-IX 2001-2006
Torque Solution aluminum radiator mount is a great dress up item for any engine bay. Get rid of the ugly and heavy stock steel mounts and replace them with our lightweight mounts. These weigh approximately 75% less than the stock mounts and do the same job..

*Priced Individually
-Made out of lightweight aluminum
-Stainless Hardware Included
-75% lighter than stock
-Aluminum NO anodize
-New Oem Insert
-Will not Rust
-Limited Lifetime Warranty
Torque Solution Rear Differential Inserts: Subaru WRX / STi 2008+ Torque Solution Solid Differential Side Inserts: Mitsubishi Evolution X MR & GSR 2008+ Torque Solution Solid Differential Bushing w/ Billet Inserts: Mitsubishi Evolution X MR & GSR 2008+
MSRP$39.99
MSRP$64.99
MSRP$119.99
Torque Solution Rear Differential Mount Inserts
Applications: Subaru WRX / STi 2008+

Torque Solution Polyurethane bushings are much harder compared to the OEM units. By replacing them with these harder Polyurethane units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-1000HP+ and 8sec e.t. torture tested
-75A durometer bushings
-Limited Lifetime Warranty

Fits:
SUBARU FORESTER SH MY09-13 INCL TURBO9/2008-8/2013
SUBARU FORESTER SJ MY14 INCL TURBO9/2013-ON
SUBARU IMPREZA GE SEDAN MY08-11 EXCL WRX & STI9/2007-8/2011
SUBARU IMPREZA GJ SEDAN MY12-14 EXCL WRX & STI9/2011-3/2014
SUBARU IMPREZA GH HATCH MY08-11 EXCL WRX & STI9/2007-8/2011
SUBARU IMPREZA GP HATCH MY12-14 EXCL WRX & STI9/2011-3/2014
SUBARU IMPREZA WRX GR, GV SEDAN MY08-119/2007-8/2011
SUBARU IMPREZA WRX GJ SEDAN MY12-149/2011-3/2014
SUBARU IMPREZA WRX VA SEDAN MY154/2014-ON
SUBARU IMPREZA WRX GR, GV HATCH MY08-119/2007-8/2011
SUBARU IMPREZA WRX GP HATCH MY12-149/2011-8/2014
SUBARU IMPREZA STI GV MY08-119/2007-8/2011
SUBARU IMPREZA STI GJ, GP MY12-149/2011-2/2014
SUBARU IMPREZA STI VL9 MY153/2014-ON

Torque Solution Solid Differential Side Inserts
Applications: Mitsubishi Evolution X GSR & MR

These 6061 Solid Billet bushings are much harder compared to the OEM units. By replacing them with these Solid Billet Inserts you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Anodized Black 6061 Billet
-Limited Lifetime Warranty
Torque Solution Solid Rear Differential Mount w/ Billet Inserts
Applications: Mitsubishi Evolution X GSR & MR

The solid differential mount will eliminate movement of the rear end in the subframe. By replacing the rubber mount with this solid 6061 billet unit you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Reduces the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Road Race torture tested
-6061 anodized billet
-25% Lighter than Stock
-Limited Lifetime Warranty


These Solid bushings are much harder compared to the OEM units. By replacing them with these harder units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-6061 Anodized Billet
-Limited Lifetime Warranty


Torque Solution Engine Mount Inserts: Dodge Neon 2000-2005 & SRT Torque Solution Engine Mount Inserts: Chrysler PT Cruiser 2000+ Torque Solution Lower Engine Mount Inserts: Kia Optima T-GDI 2011+
MSRP$32.99
MSRP$34.99
MSRP$42.99
Torque Solution Upper and Lower Engine Mount Inserts
Applications: Dodge Neon 200-2005 & SRT-4

Torque Solution polyurethane engine mount inserts fill the void in your stock mounts. This allows the mount to retain its solid shape and avoid the common cracking issues. Made from 75a durometer polyurethane insert includes a washer for each of the mounts. These give you improved traction and reduced wheel hop without to much vibration. Each kit comes with an insert for the upper and the lower mount.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-600HP+ and 9sec e.t. torture tested
-75A durometer bushings
-Limited Lifetime Warranty
Torque Solution Upper and Lower Engine Mount Inserts
Applications: Chrysler PT Cruiser 2000+

Torque Solution polyurethane engine mount inserts fill the void in your stock mounts. This allows the mount to retain its solid shape and avoid the common cracking issues. Made from 75a durometer polyurethane insert includes a washer for each of the mounts. These give you improved traction and reduced wheel hop without to much vibration. Each kit comes with an insert for the upper and the lower mount.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-600HP+ and 9sec e.t. torture tested
-75A durometer bushings
-Limited Lifetime Warranty
Torque Solution Lower Engine Mount Inserts
Applications: Kia Optima T-GDI 2011+
 
Torque Solution polyurethane engine mount inserts that replace the soft inner rubber material of the OEM Lower Engine Mount. Includes 2pc for each application. These give you improved traction and reduced wheel hop without too much vibration. Also stops the pitching of the engine under hard acceleration and on/off throttle situations which in return allows you to put the power to the ground!!!!
       
                    
  • Eliminates wheel hop / traction loss
  • Improved 60fts / e.t's Street and track torture tested
  • 75A durometer bushings
  • Limited Lifetime Warranty

Torque Solution Lower Engine Mount Inserts: Hyundai Veloster 2011+ Torque Solution Porsche Transmission Mount Inserts (Street): Porsche 911 996/997 1998-2011 Torque Solution Porsche Transmission Mount Inserts (Track): Porsche 911 996/997 1998-2011
MSRP$42.00
MSRP$149.99
MSRP$134.99
Torque Solution Lower Engine Mount Inserts
Applications: Hyundai Veloster 2011+
Torque Solution polyurethane engine mount inserts that replace the soft inner rubber material of the OEM Lower Engine Mount. Includes 2pcs for each application. These give you improved traction and reduced wheel hop without too much vibration. Also stops the pitching of the engine under hard acceleration and on/off throttle situations which in return allows you to put the power to the ground!!!!
  • Eliminates wheel hop / traction loss
  • Improved 60fts / e.t's
  • Street and track torture tested
  • 75A durometer bushings
  • Limited Lifetime Warranty

Torque Solution Urethane Transmission Mount Inserts
Applications: Porsche 996TT/GT2/GT3/C4S & GT3 Cup 997TT/GT2/GT3 & RS and GT3 Cup

Torque Solution Porsche Transmission Inserts are designed to limit the amount of transmission movement under on off throttle and braking conditions. The factory mount allows the transmission to move which gives the feeling of a sloppy drivetrain. The mounts will give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the transmission movement without the issue of Solid Mount Vibration. Why replace your broken mount with the same rubber mount that will break again due to deteriorating rubber. Replace the worn rubber with Limited Lifetime Warranty Polyurethane Inserts!!

**Fits Manual & Automatic Tiptronic Transmission. Will not fit the PDK transmission.

- Smoother Shifting while Rev Matching
- Less movement under braking
- 75A durometer bushings
- Limited Lifetime Warranty
Torque Solution Urethane Transmission Mount Inserts
Applications: Porsche 996TT/GT2/GT3/C4S & GT3 Cup 997TT/GT2/GT3 & RS and GT3 Cup

Torque Solution Porsche Transmission Inserts are designed to limit the amount of transmission movement under on off throttle and braking conditions. The factory mount allows the transmission to move which gives the feeling of a sloppy drivetrain. The mounts will give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the transmission movement without the issue of Solid Mount Vibration. Why replace your broken mount with the same rubber mount that will break again due to deteriorating rubber. Replace the worn rubber with Limited Lifetime Warranty Polyurethane Inserts!!

**Fits Manual & Automatic Tiptronic Transmission. Will not fit the PDK transmission.

- Smoother Shifting while Rev Matching
- Less movement under braking
- 95A durometer bushings
- Limited Lifetime Warranty
Torque Solution Polyurethane Insert Transmission Mount (Street): Porsche 911 996/997 1998-2011 Torque Solution Polyurethane Insert Transmission Mount (Track): Porsche 911 996/997 1998-2011 Torque Solution Transmission Mount Insert: Subaru BRZ / Scion FRS 2013+
MSRP$399.99
MSRP$399.99
MSRP$34.99
Torque Solution Urethane Insert Transmission Mount
Applications: Porsche 996TT/GT2/GT3 & GT3 Cup 997TT/GT2/GT3 & RS and GT3 Cup


Torque Solution polyurethane insert Porsche transmission mounts are designed to limit the amount of transmission movement under on off throttle and braking conditions. The factory mount allows the transmission to move which gives the feeling of a sloppy drivetrain. The mounts will give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the transmission movement without the issue of Solid Mount Vibration. Why replace your broken mount with the same rubber mount that will break again due to deteriorating rubber. Replace it 1x with a polyurethane inserted mount and do it right.

*These are done with BRAND NEW mounts only. You will receive the ENTIRE Mount w/ Inserts installed.

**Fits Manual & Automatic Tiptronic Transmission. Will not fit the PDK transmission.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- BRAND NEW oem mount
- 75A durometer bushings
- Limited Lifetime Warranty
Torque Solution Urethane Insert Transmission Mount
Applications: Porsche 996TT/GT2/GT3 & GT3 Cup 997TT/GT2/GT3 & RS and GT3 Cup
Torque Solution polyurethane insert Porsche transmission mounts are designed to limit the amount of transmission movement under on off throttle and braking conditions. The factory mount allows the transmission to move which gives the feeling of a sloppy drivetrain. The mounts will give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the transmission movement without the issue of Solid Mount Vibration. Why replace your broken mount with the same rubber mount that will break again due to deteriorating rubber. Replace it 1x with a polyurethane inserted mount and do it right.

*These are done with BRAND NEW mounts only. You will receive the ENTIRE mount w/ Inserts installed!!

**Fits Manual & Automatic Tiptronic Transmission. Will not fit the PDK transmission.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- BRAND NEW oem mount
- 95A durometer bushings
- Limited Lifetime Warranty
Torque Solution Urethane Insert Transmission Mount
Applications: Subaru BRZ & Scion FR-S 2013+
 
Torque Solution Polyurethane Transmission Inserts are designed to limit the amount of transmission movement under on off throttle and braking conditions. The factory mount allows the transmission to move which gives the feeling of a sloppy drivetrain. The mounts will give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the transmission movement without the issue of Solid Mount Vibration. Why replace your broken mount with the same rubber mount that will break again due to deteriorating rubber. Replace it 1x with a polyurethane inserted mount and do it right.

* You will receive the INSERT ONLY
 
- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- 75A durometer
- Limited Lifetime Warranty
   
 
certified secure site
We accept Mastercard, Visa, American Express, and Discover