Home > Kits /Combos
Choose a sub category:
Engine Mount Kits Boost Cap Kits
Boost Tap Kits Engine Water Pipe Repair Kits
Exhaust Mount Kits Front Brake Caliper Slider & Bolt Kits
Pendulum Mount (Dog Bone) Kits Positive Shift Kits
Rear Toe Link Kits Subframe Bolt / Spacer Kits
Torque Mount Kits Transmission Mount Kits
Water Pump/Crank/Alternator Pulley Combo
Sort By:
Page of 4
Torque Solution Engine Mount Kit: Porsche 911 1998-11 Torque Solution Billet Aluminum Engine Mount Kit: Dodge Neon Srt-4 2003-05 Torque Solution Exhaust Mount Kit: Mitsubishi Evolution VII-IX 2001-2006
MSRP$399.99
MSRP$306.99
MSRP$49.99
Porsche Engine Mount Kit Dodge Neon Srt-4 Engine Mount Kit Mitsubishi Evolution VII-IX Exhaust Mount Kit
Torque Solution Engine Mount Kit
Applications: Porsche 996TT/GT2/GT3/C2/C4/C4S & GT3 Cup 997TT/GT2/GT3 & RS/C2/C4 and GT3 Cup

Torque Solution Porsche Engine Mounts are designed to limit the amount of Engine movement from side to side which throws off the balance of the car under load. The factory mounts allow the engine to move which gives the feeling of a sloppy drivetrain. The mounts will give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the engine movement without the issue of Solid Mount Vibration. The next issue with Solid mounts is the transmission of noise from the chassis to the knock sensor on the engine which can result in a tuning nightmare. These mounts will not affect knock sensor like solid mounts do..


*Polyurethane Pictured in BLUE to show design. You will receive in all black.


- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty

Torque Solution Engine Mounts
Applications: Dodge Neon Srt-4 2000-2005

 

Torque Solution is proud to offer the best complete engine mount set available for the Dodge Neon SRT-4. All mounts are made out of high grade billet aluminum material machined to the tightest tolerances. All the mounts bushings are made with 50% more urethane giving you the least amount of vibrations when compared to the competitors. These engine mounts are the lightest on the market. They can be seen on the fastest World Challenge Neon SRT-4's in the world. Wheel hop is notorious for snapping axles. Consider that a thing of the past. This combination of mounts will eliminate wheel hop giving you optimal traction under the harshest of conditions while saving your axles.These are the same mounts in the fastest world challenge Neon SRT-4's in the world.

 
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Life Time Warranty

Torque Solution Exhaust Mount Kit
Applications: Mitsubishi  Evolution VII-IX 2001-2006 
 
Torque Solution exhaust mounts are made from a high grade Urethane.Our exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits.
 
Direct Replacement
 
•Eliminates Exhaust Movment 
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty

 
 
Torque Solution Exhaust Mount: 12 mm Long Torque Solution Exhaust Mount: 15 mm Long Torque Solution Exhaust Mount Kit: Dodge Neon SRT-4 2003-05
MSRP$40.00
MSRP$42.00
MSRP$27.00
12mm Exhaust Mount 15mm 4 (Pack) Extra Long Single  Exhaust Mount Kit Dodge Neon SRT-4 Exhaust Mount Kit
Torque Solution Exhaust Mount
Applications:
12 mm Long
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
Torque Solution Exhaust Mount
Applications: 15 mm Long
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
- Eliminates Exhaust Movment
- Made From high grade polyurethane
- Street and track torture tested
- 75A durometer
- Life Time Warranty
Torque Solution Exhaust Mount
Applications:
Dodge Neon SRT-4 2003-2005
 
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
 
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
Torque Solution Exhaust Mount Kit: Dodge Caliber 2006-11 Torque Solution Exhaust Mount Kit: Dodge Neon 1995-99 Torque Solution Exhaust Mount Kit: Mazda RX8
MSRP$27.00
MSRP$27.00
MSRP$45.00
Dodge Caliber Exhaust Mount Kit Dodge Neon Exhaust Mount Kit Mazda RX8 Exhaust Mount Kit
Torque Solution Exhaust Mount
Applications:
Dodges Caliber 2006-2011
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
Torque Solution Exhaust Mount Kit
Applications:
Dodge Neon 1995-1999
 
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
 
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
Torque Solution Exhaust Mount Kit
Applications:
Mazda RX8
 
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
 
- Eliminates Exhaust Movment
- Made From high grade polyurethane
- Street and track torture tested
- 75A durometer
- Limited Lifetime Warranty
Torque Solution Exhaust Mount kit: Scion TC 2005-2010 Torque Solution Exhaust Mount kit: Scion TC 2011-13 Torque Solution Exhaust Mount Kit: Honda Civic 1992-2000 ALL
MSRP$45.00
MSRP$45.00
MSRP$45.00
Scion TC  Exhaust Mount kit Scion TC  Exhaust Mount kit
Torque Solution Exhaust Mount Kit
Applications:
Scion TC 2005-2010
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
-Eliminates Exhaust Movment
-Made From high grade polyurethane
-Street and track torture tested
-75A durometer
-Life Time Warranty
Torque Solution Exhaust Mount Kit
Applications:
Scion TC 2011-2013
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
Torque Solution Exhaust Mount Kit
Applications:
Honda Civic 1992-2000 ALL
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
-Eliminates Exhaust Movement
-Made From high grade polyurethane
-Street and track torture tested
-75A durometer
-Limited Lifetime Warranty
Torque Solution Exhaust Mount Kit: Honda Civic 2006-2011 Including Si Torque Solution Exhaust Mount kit: Mitsubishi Evolution X 2008-14 Torque Solution Exhaust Mount kit: Mitsubishi Evolution X 2008-14
MSRP$49.99
MSRP$49.99
MSRP$44.99
Mitsubishi Evolution X Exhaust Mount kit Mitsubishi Evolution X Exhaust Mount kit
Torque Solution Exhaust Mount Kit
Applications: Honda Civic 2006-2011 Incl. SI
Torque Solution exhaust mounts are made from a high grade Urethane. Our exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust system or to replace your old worn out rubber mounts with our Limited Lifetime Warranty units..
Direct Replacement
- Eliminates Exhaust Movement
- Made From high grade polyurethane
- Street and track torture tested
- 75A durometer
- Limited Lifetime Warranty

Torque Solution Exhaust Mount Kit
Applications: Mitsubishi Evolution X 2008-2014
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits.
Direct Replacement
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty

Torque Solution Exhaust Mount Kit
Applications: Mitsubishi Evolution X 2008-2014
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits.
Direct Replacement Single Side Exhaust
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty

Torque Solution Billet Aluminum 4 Piece Full Engine Mount Kit: Mitsubishi Evolution VII-IX 2001-2006 Torque Solution Billet Aluminum 4 Piece Engine Mount Kit: Mitsubishi Evolution VII-IX 2001-2006 Torque Solution Billet aluminum 3 piece Engine Mount kit: Mitsubishi Evolution VII-IX 2001-2006
MSRP$464.99
MSRP$464.99
MSRP$369.99
Mitsubishi Evolution VII-IX Engine Mount Kit Mitsubishi Evolution 4pc Engine Mount Kit Mitsubishi Evolution 3pc Engine Mount Kit
Torque Solution Engine Mount Kit ( 5 Speed )
Applications: Mitsubishi Evolution VII-IX 2001-2006

Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins.These mounts can be seen on some of the fastest street and track EVO's in the world. Our mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting mounts that will be reliable for years to come and help you win on race day!

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Engine Mount Kit ( 6 Speed )
Applications: Mitsubishi Evolution VII-IX 2001-2006
Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins.These mounts can be seen on some of the fastest street and track EVO's in the world. Our mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting mounts that will be reliable for years to come and help you win on race day!
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 8sec e.t. torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty

Torque Solution Engine Mount Kit ( 5 Speed)
Applications: Mitsubishi Evolution VII-IX 2001-2006

Torque Solution motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins. These mounts can be seen on some of the fastest street and track EVO's in the world. These mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mounts that will be reliable for years to come and help you win on race day! This kit comes with the following -5spd trans mount -side engine mount -front engine mount

- Eliminates wheel hop / traction loss
- mproved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Billet aluminum 3 piece Engine Mount kit: Mitsubishi Evolution VII-IX 2001-2006 Torque Solution Mitsubishi EVO VII-IX Billet 3 piece mount Kit: Mitsubishi Evolution VII-IX 2001-2006 Torque Solution Mitsubishi EVO VII-IX Billet 3 piece mount Kit: Mitsubishi Evolution VII-IX 2001-2006
MSRP$369.99
MSRP$379.99
MSRP$379.99
Mitsubishi Evolution Engine Mount kit Mitsubishi Evolution Engine Mounts Mitsubishi EVO Engine Mounts
Torque Solution Engine Mount Kit ( 6 Speed )
Applications: Mitsubishi Evolution VII-IX 2001-2006
The Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins. Here at Torque Solution our mounts are anodized black with torque solution laser engraved. These mounts can be seen on some of the fastest street and track EVO's in the world. These mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mounts that will be reliable for years to come and help you win on race day! This kit comes with the following -side engine mount -front engine mount -6spd trans mount
Torque Solution Engine Mount Kit ( 5 speed )
Applications: Mitsubishi Evolution VII-IX 2001-2006


Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins.These mounts can be seen on some of the fastest street and track EVO's in the world. These mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mounts that will be reliable for years to come and help you win on race day! This kit comes with the following. -Side engine mount -Rear engine mount -5 spd trans mount


- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
Torque Solution Engine Mount Kit ( 6 Speed )
Applications: Mitsubishi Evolution VII-IX 2001-2006
 
Torque Solution  motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins. These mounts can be seen on some of the fastest street and track EVO's in the world. These mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mounts that will be reliable for years to come and help you win on race day! This kit comes with the following -Side engine mount -Rear engine mount -6 spd trans mount
 
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 8sec e.t. torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty

 
 
Torque Solution Exhaust Mount Kit: Subaru Impreza 93-07, Wrx 02-07, Sti 04-07, Legacy 00-04, Forester 00-08 Torque Solution Exhaust Mount Kit: Subaru Impreza 2008+, Sti 2008+, WRX 2008+, Legacy GT 2005+, Forester XT 09-12 Torque Solution Exhaust Mount Kit: Subaru 15 mm
MSRP$36.00
MSRP$45.00
MSRP$36.00
Subaru WRX Exhaust Mount Kit Subaru Sti Exhaust Mount Kit Exhaust Mount Kit
Torque Solution Exhaust Mount
Applications:
Subaru Impreza 93-07, Wrx 02-07, Sti 04-07, Legacy 00-04, Forester 00-08
Our exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits.This is a pack of 4 enough to do most single side exhaust kits. These are the 12mm Mounts. They should fit most imprezas up to 07 and others but please check your car first.
- Eliminates Exhaust Movement
- Made From high grade polyurethane
- Street and track torture tested
- 75A durometer
- Limited Lifetime Warranty
Torque Solution Exhaust Mount Kit
Applications:
Subaru Impreza 2008+, Sti 2008+, WRX 2008+, Legacy GT 2005+, Forester XT 09-12

Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits.This is a pack of 5, just enough to do a full exhaust on the 08+ STI (or any with dual exhausts). These are the 12mm Mounts. They should fit most imprezas 2008 up and others.

- Eliminates Exhaust Movement
- Made From high grade polyurethane
- Street and track torture tested
- 75A durometer
- Life Time Warranty
Torque Solution Exhaust Mount
Applications:
Subaru 15 mm
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
Torque Solution GT1 Engine Water Pipe Repair Kit : Porsche 911 996 997 Torque Solution Exhaust Mount Kit: Mazdaspeed 3 2007-2009 Torque Solution Rear Toe Link Kit: Porsche 996/997, Cayman & Boxster
MSRP$195.00
MSRP$64.99
MSRP$449.00
Torque Solution Porsche GT1 Engine Water Pipe Fix
Applications: Porsche ALL GT1 Engines

Torque Solution has brought to you an 8pc Coolant Pipe Repair Kit for all Porsche Gt1 Engines with Press fit and Glued coolant pipes.. These will fix the issue that plagues the Gt1 engine of water pipe failures resulting in coolant dumping all over the engine bay and possibly on to the rear tires causing you to lose control of the car. This issue can ruin a good track day, weekend or even worse cause you to have an accident on the street or on the track.. If you have your engine out of the car for any reason thats the best time to do the repair.. This will require the engine to be removed and the fittings welded in place.. Giving you peace of mind knowing its done right with the weld on fittings..

Torque Solution Exhaust Mount Kit
Applications: 2007-2009 Mazdaspeed 3

Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits.
 
Direct Replacement
 
-Eliminates Exhaust Movment
-Made From high grade polyurethane
-Street and track torture tested
-75A durometer
-Life Time Warranty

Torque Solution Rear Toe Link Kit
Applications: 996/997, Cayman & Boxster
Torque Solution Porsche 996/997 Cayman & Boxster Rear Toe Links will help restore the proper suspension geometry for lowered vehicles.. The factory control arm do not have the adjustment range needed to compensate when lowering your 996/997, Cayman or Boxster.. This results in poor tire wear and an insufficient contact patch.. This kit will provide the additional adjustment needed. These work great for street and track use and do not transmit harsh vibration thru the vehicle..

Made of 6061-T6 Aluminum w/ FK Rod Ends

2 links Total Included in Each Package

Requires NO modification to chassis, direct bolt on replacement part. Can be used on daily driven street cars & is highly recommended for Street or Track setups..

Limited Lifetime Warranty
Torque Solution Positive Shift Kit: Subaru Impreza 1993-2007, Subaru WRX & STi 2002-2007 Torque Solution Exhaust Mount Kit: Acura RSX 2002-2006 Torque Solution Exhaust Mount Kit: BMW E92 M3 2007+
MSRP$38.99
MSRP$34.99
MSRP$44.99
Torque Solution Positive Shift Kit
Applications: Subaru Impreza 1993-2007, Subaru Wrx & STi 2002-2007
Torque Solution continues to push the limits of high performance aftermarket products with our "NEW" Positive Shift Kit. Developed to perform under the most extreme conditions, our Urethane Components bridge the gap between ordinary rubber and cheap plastics used in current aftermarket shifter bushings by offering a unique urethane specifically chosen by Torque Solution engineers to ensure product performance and reliability while drastically reducing shifter end play allowing for crisper, more precise shifts. All this makes it easy for us to stand behind our shifter bushings with a Limited Lifetime Warranty.
- Improved 60fts / e.t's
- Installs in under 30 Minutes in your garage
- Eliminates excessive Shifter play
- Solid feeling gear changes
- Street and track torture tested
- 95A durometer polyurethane
- Limited Lifetime Warranty
Torque Solution Exhaust Mount Kit
Applications: Acura RSX 2002 - 2006
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kit.
-Eliminates Exhaust Movement
-Made From high grade polyurethane
-Street and track torture tested
-75A durometer
-Life Time Warranty

Torque Solution Exhaust Mount
Applications: BMW E92 M3 2007+
 
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Replace your worn out cracked mounts.. Great compliment to any exhaust kit. They fit most cars, please check your car first.
 
-12mm Long X 4
-Eliminates Exhaust Movement
-Made From high grade polyurethane
-Street and track torture tested
-75A durometer
-Life Time Warranty
   
 
certified secure site
We accept Mastercard, Visa, American Express, and Discover