|
Torque Solution Stainless Steel O2 Sensor Bung: Universal
|
|
Torque Solution Exhaust mount: 10 mm
|
|
Torque Solution Exhaust Mount: Mitsubishi
|
|
MSRP $4.95
|
|
|
|
MSRP $8.00
|
|
|
|
MSRP $8.00
|
|
|
|
|
|
 Torque Solution Stainless Steel O2 Sensor Bung
Applications: Universal
Stainless Steel 18mm X 1.5 Weld-on 02 bung for adding Oxygen sensors to your exhaust.
-304 Stainless Steel
-Life Time Warranty
-Made in USA
|
Torque Solution Exhaust Mount
Applications: Universal 10 MM
Our exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
•Made in USA
|
Torque Solution Exhaust Mount
Applications: Mitsubishi
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
•Made in USA
|
|
|
|
Torque Solution Exhaust Mount: 9 mm
|
|
Torque Solution Exhaust Mount: 15 mm
|
|
Torque Solution Exhaust Mount: 12 mm Long
|
|
MSRP $8.00
|
|
|
|
MSRP $8.00
|
|
|
|
MSRP $9.00
|
|
|
|
|
|
|
Torque Solution Exhaust Mount
Applications: 9 MM
Our exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
•Made in USA
|
Torque Solution Exhaust Mount
Applications: Universal 15 mm
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
•Made in USA
|
Torque Solution Exhaust Mount
Applications: Universal 12 mm Long
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
•Made in USA
|
|
|
|
Torque Solution O2 Sensor Extender: Universal
|
|
Torque Solution Exhaust Mount: Mitsubishi
|
|
Torque Solution Stubby Billet Antenna: Mitsubishi Lancer Evolution 2003+
|
|
MSRP $12.95
|
|
|
|
MSRP $15.00
|
|
|
|
MSRP $19.99
|
|
|
|
|
|
Torque Solution O2 Sensor Extender
Applications: Universal
On
ODB-II vehicles (96+), the ECU has two O2 sensors for diagnostic
purposes. The first O2 sensor is located before the Catalytic Converter.
This O2 sensor is responsible for all the Air/Fuel tuning and is
imperative to the operation of the vehicle.
This
Steel O2 sensor extender is basically for keeping the O2
sensor out of exhaust pipe. These also work when running a hi flow cat
or a test pipe. It's a very simple 10~15 mins installation, This
extender will fit most O2 sensors with 18mm thread size.
-Improved Gas mileage
-Fixes CEL in most cases
-Life Time Warranty
-Made in USA
|
Torque Solution Exhaust Mount
Applications: Mitsubishi
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
•Made in USA
|
Torque Solution Shorty Antenna
Applications: Mitsubishi Lancer Evolution 2003+
Replace your long factory antenna with our billet shorty antenna, Giving you a new style to your car.
- 3.8" inch Tall
- Installs in under 2 minutes
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- Life Time Warranty
- Made in USA
|
|
|
|
Torque Solution Super Shorty 2" Billet Antenna: Mitsubishi Evolution X 2008+
|
|
Torque Solution Gate Selector Pivot Bushing: Mitsubishi Evolution X 2008+
|
|
Torque Solution Shifter Base Bushing Kit: Mitsubishi Evo X 2008-11
|
|
MSRP $19.99
|
|
|
|
MSRP $22.00
|
|
|
|
MSRP $22.95
|
|
|
|
|
|
|
Torque Solution Super Shorty Antenna
Applications: Mitsubishi Evolution X 2008+
Replace your long factory antenna with our billet shorty antenna, Giving you a new style to your car.
- 2" inch Tall
- Installs in under 2 minutes
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized
- Lifetime Warranty
- Made in USA
|
Torque Solution Gate Selector Pivot Bushing
Applications: Mitsubishi Evolution X 2008+
Torque
Solution Gate Selector Pivot Bushing eliminates much of the shifter
play felt on the Evo X models. Giving you a more precise feel in between
gear changes. Get rid of that sloppy and less than direct feeling the
Evo X has with this Delrin 2pc replacement kit.
-Reduced Shifter Play
-Improved 60fts / e.t's
-Self Lubricating
-Made out of lightweight Delrin
-Street and track torture tested
-Life Time Warranty
-Made in USA
Evolutionm.net Install & Review
http://forums.evolutionm.net/service-parts-tuning-review/569597-torque-solution-evo-x-gate-selector-pivot-bushing-install-review.html
|
Torque Solution Shifter Base Bushing Kit
Application: Mitsubishi Evo X 2008-2011
Torque Solution shifter base bushing kit replaces the OEM rubber bushings on the bottom of the shifter providing a more stable shifter platform and mounting points.
• Cnc machined 6061-T6 billet aluminum
• Installs in under 30 minutes
• Life Time Warranty
• Made in USA
|
|
|
|
Torque Solution Shifter Base Bushing Kit: Mitsubishi Lancer 2008-11
|
|
Torque Solution Shorty Billet Antenna : Mitsubishi Evolution X 2008-11 ( Excluding MR )
|
|
Torque Solution Shifter Cable Bushings: Mitsubishi Evolution X 2008-09
|
|
MSRP $22.95
|
|
|
|
MSRP $24.99
|
|
|
|
MSRP $26.95
|
|
|
|
|
|
|
Torque Solution Shifter Base Bushing Kit
Application: Mitsubishi Lancer 2008-2011
Torque Solution shifter base bushing kit replaces the OEM rubber bushings on the bottom of the shifter providing a more stable shifter platform and mounting points. This yeilds improved shifting feel and characteristics for years of enjoyment.
• Cnc machined 6061-T6 billet aluminum
• Installs in under 30 minutes
• Life Time Warranty
• Made in USA
|
Torque Solution Shorty Antanna
Applications: Mitsubishi Evolution X 2008-2011
Replace your long factory antenna with our billet shorty antenna,Giving you a new style to your car.
• 2 inch Tall
• Installs in under 2 minutes
• Made out of lightweight 6061-T6 billet aluminum
• Black anodized / Torque Solution Laser engraved
• Life Time Warranty
• Made in USA
|
Torque Solution continues to push the limits of high performance aftermarket products with our “NEW” Shock Factor Mitsubishi X Shifter Bushings. Developed to perform under the most extreme conditions, Shock Factor Shifter Bushings bridge the gap between ordinary aluminum, brass, and cheap plastics used in current aftermarket shifter bushings by offering a unique Delrin specifically chosen by Torque Solution engineers to ensure product performance and reliability while drastically reducing shifter end play allowing for crisper, more precise shifts. All this makes it easy for us to stand behind our shifter bushings with a lifetime warranty. Shifter Cable Bushings Applications: Mitsubishi Evolution X 2008-2009
|
|
|
|
Torque Solution Shifter Cable Bushings: Mitsubishi Evolution X 2010-12
|
|
Torque Solution Exhaust Mount: 15 mm Long
|
|
Torque Solution Exhaust Mount kit: Mitsubishi Evolution X 2008-11
|
|
MSRP $26.95
|
|
|
|
MSRP $36.00
|
|
|
|
MSRP $39.99
|
|
|
|
|
|
|
Torque Solution Shifter Cable Bushings
Applications: Mitsubishi Evolution X 10-12
Torque Solution continues to push the limits of high performance aftermarket products with our "NEW" Shock Factor Shifter Bushings. Developed to perform under the most extreme conditions, Shock Factor Shifter Bushings bridge the gap between ordinary aluminum, brass, and cheap plastics used in current aftermarket shifter bushings by offering a unique Delrin specifically chosen by Torque Solution engineers to ensure product performance and reliability while drastically reducing shifter end play allowing for crisper, more precise shifts. All this makes it easy for us to stand behind our shifter bushings with a lifetime warranty.
Street or Track Shock Factor Shifter Bushings will always get you in gear!!!
• Eliminates excessive Shifter play
• Street and track torture tested
• Installs in under 30 minutes
• Life Time Warranty
• Made in USA
|
Torque Solution Exhaust Mount
Applications: 15 mm Long
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits. They fit most cars, please check your car first.
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
•Made in USA
|
Torque Solution Exhaust Mount Kit
Applications: Mitsubishi Evolution X 2008-2011
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits.
Direct Replacement Single Side Exhaust
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
•Made in USA
|
|
|
|
Torque Solution Exhaust Mount kit: Mitsubishi Evolution X 2008-11
|
|
Torque Solution Urethane Differential Inserts: Mitsubishi Evolution X MR & GSR 2008+
|
|
Torque Solution Drive Shaft Carrier Bearing Support Bushings: Mitsubishi Evolution 1992-12
|
|
MSRP $44.99
|
|
|
|
MSRP $49.95
|
|
|
|
MSRP $49.99
|
|
|
|
|
|
|
Torque Solution Exhaust Mount Kit
Applications: Mitsubishi Evolution X 2008-2011
Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits.
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
•Made in USA
|
Torque Solution Rear Differential Mount Inserts
Applications: Mitsubishi Evolution X GSR & MR
These
Solid Polyurethane bushings are much harder compared to the OEM units.
By replacing them with these harder Polyurethane units you are able to
get rid of the unwanted slop and flexing of the stock units which allows
for the power to go into rotating the tires, instead of flexing the
rubber. Giving you better feedback, sharper response, more
predictability on throttle input, along with eliminating annoying
clunking during hard shifts.
-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-95A durometer bushings
-LifeTime Warranty
-Made in USA
|
Torque Solution Drive Shaft Carrier Bearing Support Bushings
Applications: Mitsubishi Evolution 1992-2010 I ,II,III, IV,V,VI,VII,VIII,IX,X
Torque Solution Drive Shaft Center Support Bushings will replace
the OEM Rubber mounts with Delrin Polymer pieces. Doing so will allow
for reduced wheel hop, improved acceleration and better E.T's. The
mounts keep the propeller shaft from moving under hard acceleration,
stopping and turning giving you optimal performance 100% of the time.
-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight Delrin
-Less NVH than 6061 Billet
-Street and track torture tested
-Black anodized
-Life Time Warranty
-Made in USA
|
|
|
|
Torque Solution Engine Mount Inserts: Mitsubishi Evolution X 2008-11
|
|
Torque Solution Solid Differential Side Inserts: Mitsubishi Evolution X MR & GSR 2008+
|
|
Torque Solution Solid Rear Differential Mount: Mitsubishi Evolution X MR & GSR 2008+
|
|
MSRP $49.99
|
|
|
|
MSRP $59.00
|
|
|
|
MSRP $59.95
|
|
|
|
|
|
Torque Solution Engine Mount Inserts
Applications: Mitsubishi Evolution X 2008-2011
Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM EVO X engine mounts. Made from 75a durometer polyurethane. Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a lifetime warranty through Torque Solution. Fits both drivers side and passenger side.
|
Torque Solution Solid Differential Side Inserts
Applications: Mitsubishi Evolution X GSR & MR
These 6061 Solid Billet bushings are much harder compared to the OEM units.
By replacing them with these Solid Billet Inserts you are able to
get rid of the unwanted slop and flexing of the stock units which allows
for the power to go into rotating the tires, instead of flexing the
rubber. Giving you better feedback, sharper response, more
predictability on throttle input, along with eliminating annoying
clunking during hard shifts.
-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Anodized Black 6061 Billet
-Lifetime Warranty
-Made in USA
|
Torque Solution Rear Differential Mount
Applications: Mitsubishi Evolution X 2008+
The solid differential mount will eliminate movement of the rear end in the subframe. By replacing the rubber mount with this solid 6061 billet unit you are able to
get rid of the unwanted slop and flexing of the stock units which allows
for the power to go into rotating the tires, instead of flexing the
rubber. Giving you better feedback, sharper response, more
predictability on throttle input, along with eliminating annoying
clunking during hard shifts.
-Reduces the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Road Race torture tested
-6061 anodized billet
-25% Lighter than Stock
-LifeTime Warranty
-Made in USA
|
|
|
|
Torque Solution Engine Mount Inserts: Mitsubishi Evolution X 2008-11
|
|
Torque Solution Billet Aluminum Front Engine Mount: Mitsubishi Evolution X 2008-11
|
|
Torque Solution Short Shifter: Mitsubishi Evolution X RIGHT HAND DRIVE
|
|
MSRP $98.99
|
|
|
|
MSRP $99.99
|
|
|
|
Our Price: $109.00
|
|
|
|
|
|
Torque Solution Engine Mount Insert
Applications: Mitsubishi Evolution X 2008-2011
Torque Solution includes 2 urethane bushings and a sleeve for the PASSENGER side and 2 urethane bushings and a sleeve for the DRIVER side. Upgrading your stock rubber bushings to urethane bushings will help reduce engine movement and wheel hop. This means you receive better traction, which will improve your 60ft and 1/4 mile time. Affordable price, easy install, and most importantly you'll see and feel the advantages.
|
Torque Solution Engine Mount
Applications: Mitsubishi Evolution X 2008-2011
Torque Solution Mounts Increase horsepower by reducing frictional lost due to poor axle geometry. Axle geometry under acceleration is very critical when trying to apply horsepower. Poor axle geometry is caused when engine and suspension center lines are changed. By installing Torque Solution Billet engine mounts engine center line are kept within precision tolerances.For street and race applications. Some vibration noticeable.. •Eliminates wheel hop / traction loss •Improved 60fts / e.t's •Made out of lightweight 6061-T6 billet aluminum •600HP+ and 9sec e.t. torture tested •Black anodized / Torque Solution Laser engraved •75A durometer bushings •Life Time Warranty •Made in USA
|
Torque Solution Short Throw Shifter
Applications: 2008+ RHD Evolution X ( Right Hand Drive )
Torque Solution short throw shifter is a direct replacement for
your long throw stock unit. Our shifters are made from 4130 Chromoly
steel and are tig welded in a precision jig. Next they go through the black nickel anodizing process to insure they last a lifetime
Features:
- 32% throw reduction - 1.25" height reduction - 4130 Cr-Mo steel - Installs in under 30 minutes - LifeTime Warranty - Made in USA
|
|
|
|
Torque Solution Solid Differential Bushing w/ Billet Inserts: Mitsubishi Evolution X MR & GSR 2008+
|
|
Torque Solution Solid Differential Bushing w/ Urethane Inserts: Mitsubishi Evolution X MR & GSR 2008+
|
|
Torque Solution Short Shifter: Mitsubishi Evolution X 2008-12
|
|
MSRP $109.00
|
|
|
|
MSRP $109.95
|
|
|
|
MSRP $109.99
|
|
|
|
|
|
Torque Solution Solid Rear Differential Mount w/ Billet Inserts
Applications: Mitsubishi Evolution X GSR & MR
The solid differential mount will eliminate movement of the rear end in
the subframe. By replacing the rubber mount with this solid 6061 billet
unit you are able to
get rid of the unwanted slop and flexing of the stock units which allows
for the power to go into rotating the tires, instead of flexing the
rubber. Giving you better feedback, sharper response, more
predictability on throttle input, along with eliminating annoying
clunking during hard shifts.
-Reduces the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Road Race torture tested
-6061 anodized billet
-25% Lighter than Stock
-LifeTime Warranty
-Made in USA
These
Solid bushings are much harder compared to the OEM units.
By replacing them with these harder units you are able to
get rid of the unwanted slop and flexing of the stock units which allows
for the power to go into rotating the tires, instead of flexing the
rubber. Giving you better feedback, sharper response, more
predictability on throttle input, along with eliminating annoying
clunking during hard shifts.
-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-6061 Anodized Billet
-LifeTime Warranty
-Made in USA
|
Torque Solution Solid Rear Differential Mount w/ Inserts
Applications: Mitsubishi Evolution X GSR & MR
The solid differential mount will eliminate movement of the rear end in
the subframe. By replacing the rubber mount with this solid 6061 billet
unit you are able to
get rid of the unwanted slop and flexing of the stock units which allows
for the power to go into rotating the tires, instead of flexing the
rubber. Giving you better feedback, sharper response, more
predictability on throttle input, along with eliminating annoying
clunking during hard shifts.
•Reduces the " CLUNK " when shifting hard
•Reduces wheel hop / traction loss
•Improved 60fts / e.t's
•Road Race torture tested
•6061 anodized billet
•25% Lighter than Stock
•LifeTime Warranty
•Made in USA
|
Torque Solution Short Shifter
Applications: Mitsubishi Evolution X 2008-2012
Torque Solution short throw shifter is a direct replacement for your long throw stock unit.Our shifters are made from 4130 Chromoly steel and are Cnc machined to precision tolerances .After this they are set out to be chrome plated to last a lifetime.This is the best mod for your ride.
Features:
- 32% throw reduction
- 1.25" height reduction
- 4130 Cr-Mo steel
- Installs in under 30 minutes
- Compatiable with stock and aftermarket shift knobs
- Changes the factory offset to center shifter closer to the driver
- Life Time Warranty
- Made in USA
|
|
|
