Torque Solution Adjustable Rear Upper Camber Arms
Applications: Toyota GR Corolla 2023+

Torque Solution Adjustable Rear Upper Camber Arm Kit is designed to correct the rear suspension geometry on your lowered GR Corolla. If you are experiencing uneven tire wear due to camber this kit will bring your alignment back in spec for better performance and longer lasting tires. The factory adjustment range is not enough to bring your car back within spec after lowering the vehicle. If you plan to track your car or get the full life of your tires these are a must have!!

We chose to use 7075 billet aluminum for its increased strength over 6061. We then black anodized the billet for corrosion resistance and finished it off with blue titanium hardware. You can rest assured knowing these are quality arms that will last a lifetime.

2 arms total Included in each kit. Requires NO modification to chassis and is a direct bolt on replacement part. Can be used on daily driven street cars and is highly recommended for Street or Track setups.


**Important Note: We recommend professional installation and that an alignment is performed after installing this kit.

Install Notes:
- Torque the Titanium M5 Allen Bolts to 150 in. lbs. After about 100 miles double check all bolts are still properly torqued.

**Bearings are a wear and tear item not covered by warranty.