Ascent 2019+

Home > Select Your Car > SUBARU > Ascent 2019+

Sort By:

Page of 1


Torque Solution Turbo Sump Restrictor: Subaru WRX 2015+ / Forester XT 2014+ MSRP$46.65 Our Price:$41.99 You save $4.66!		Torque Solution Lightweight Water Pump Pulley: Subaru FA24 / FB25 Engines MSRP$88.88 Our Price:$79.99 You save $8.89!		Torque Solution Blow Off Valve Adapter: Subaru FA24 2.4T MSRP$99.99 Our Price:$89.99 You save $10.00!

Torque Solution Turbo Sump Restrictor Applications: Subaru WRX 2015+ / Forester XT 2014+ Torque Solution Turbo Sump Restrictor for Subaru WRX 2015+ / Forester XT 2014+ is the perfect solution to help fix your FA DIT engine from smoking / burning oil after installing your aftermarket exhaust components. Due to the reduced engine back pressure from the upgraded exhaust oil tends to go past the turbo seals. This leads to having a burning oil smell and blue smoke coming out the exhaust. Our restrictor works by bringing proper pressure balance back to the oil return system resulting in smell and smoke free enjoyment of your WRX or Forester XT. - 6061 Billet Aluminum - Black Anodized - Includes Stainless Steel Clamps (4) - Limited Lifetime Warranty Includes: - Billet Inline Restrictor - 10-16mm Stainless Worm Gear Clamp (2) - 8-22mm Stainless Worm Gear Clamp (2) - 8" Zip Ties (3) Installation: This restrictor installs inline (arrows facing up) on the turbo sump vent hose that runs from the turbo sump to the front engine cover. Any location on the hose is fine as long as there is approx. 3/4" of hose above and below the restrictor. PROPOSITION 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)		Torque Solution Lightweight Water Pump Pulley Applications: Subaru FA24 / FB25 Engines (See Application Guide Below) Torque Solution Lightweight Water Pump Pulley is a nice and simple upgrade for Subaru FA24 / FB25 Engines. Our pulley is approximately 37% lighter than the OEM pulley. Less engine rotational weight is a great way to improve throttle response and free up lost HP and TQ. Easy install by simply swapping in place of the OEM pulley. - 6061 Billet Aluminum - Black Anodized w/ Torque Solution logo - Weighs Just about 0.5 lbs - Approximately 37% Lighter Than OEM - Easy To Install - Limited Lifetime Warranty Includes: - Billet Aluminum Water Pump Pulley (1) Fits: - Subaru WRX 2022+ - Subaru Ascent 2019+ - Subaru Forester 2019+ - Subaru Forester Wilderness 2022+ - Subaru Legacy 2020+ - Subaru Legacy XT 2020+ - Subaru Outback 2020+ - Subaru Outback XT 2020+ - Subaru Outback Wilderness 2022+ - Subaru Impreza 2024+ - Subaru Crosstrek 2021+ - Subaru Crosstrek Wilderness 2024+ PROPOSITION 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)		Torque Solution Blow Off Valve Adapter Applications: Subaru FA24 2.4T Engines The Torque Solution blow off valve adapter was designed to give you that atmospheric blow off sound you're looking for on your turbocharged Subaru FA24 2.4T engine. A simple bolt on modification that is compatible with the factory tune as it always partially recirculates and is completely reversible if you ever need to remove it. This adapter is user tunable by the 9 vent holes (3 per side), so you can adjust it to suit your sound preference by adding or removing the included set screw plugs. - Great sound - 6061 Billet Aluminum - Black Anodized w/ TS Logo - Easy Install - Mounting Hardware included - Limited Lifetime Warranty Includes: - Billet BOV Spacer (1) - O-rings (2) - M6-1.0 x 30 Stainless Socket Cap Bolt (3) - 10-32 x 1/4 Tunable Stainless Steel Set Screw (9) - 2mm Hex Key Fits: - Subaru WRX 2022+ - Subaru Ascent 2019+ - Subaru Outback XT 2020+ - Subaru Legacy XT 2021+ PROPOSITION 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)


Torque Solution Pinch Weld Saver Jack Pads: Subaru (multiple fitments) / Toyota / Mazda MSRP:$109.99 Our Price:$98.99 You save $11.00!

Torque Solution Pinch Weld Saver Jack Pads Applications: (multiple fitments) Torque Solution Pinch Weld Saver Jack Pads are designed to fit the pinch welds on your vehicles jack points. Our jack pads are easy to install with the supplied hardware to mount them permanently in place. We also integrated a large knurl pattern into the billet to help prevent any slippage when jacking. Our jack pads will help prevent damage to your vehicles pinch weld and/or rocker panel that can occur when using a hydraulic jack. Each Jack Pad is made from 6061 billet aluminum and anodized black for corrosion resistance. We also supply a tool to be able to also use with the OEM jack when needed without needing to remove a jack pad. - 6061 Billet Aluminum - Black Anodized W/ Torque Solution logo - Stainless Steel Hardware - Prevents Flattened Pinch Welds - Easy To Install - Limited Lifetime Warranty Includes: - Billet Aluminum Jack Pad 848a (4) - Billet Aluminum OEM Jack Adapter 848b (1) - M6 x 16 Stainless Steel Socket Cap Bolt (8) - Blue Thread Locker (1) Fits: - Mazda MX-5 Miata NA 1990-1997 - Mazda MX-5 Miata NB 1998-2004 - Mazda MX-5 Miata NC 2005-2014 - Mazda MX-5 Miata ND 2015+ - Toyota Corolla 2020+ - Toyota GR Corolla 2023+ - Toyota GR 86 2022+ - Scion FR-S 2013-2020 - Subaru Ascent 2019+ - Subaru BRZ 2013-2020 - Subaru BRZ 2022+ - Subaru Crosstrek 2013+ - Subaru Forester 1997+ (all models) - Subaru Impreza 1993+ (all models) - Subaru Legacy 1990+ (all models) - Subaru Outback 1995+ (all models) - Subaru WRX 2008-2014 - Subaru WRX 2015-2021 - Subaru WRX 2022+ - Subaru STI 2008-2014 - Subaru STI 2015-2021 Plus many more.... This part may fit many other vehicles not listed above. Simply measure your pinch weld to confirm!! These will fit pinch welds that measure 3.8mm-9 65mm (0.150"-0.380") thick and a minimum height of 15.25mm (0.600"). PROPOSITION 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)