|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution HD Turbo Screen Shield
Applications: Stainless Steel Wire Mesh Filter for 3" Inlet / Pipe
Torque Solution HD Turbo Screen Shields are the perfect solution to keep your investment safe from rocks or debris without being suffocated by a cone filter. Our screens are made from a sturdy 2x2mm woven 0.63mm thick stainless steel wire screen that is press bent into shape. We then then place them into urethane molds to make a solid and yet flexible 1 piece design that is easily installed onto your turbo, superchargers, or piping.
- 2x2mm / 0.63mm Woven Stainless Steel Mesh
- Molded Urethane Casing
- Stainless Steel Worm Gear Clamp
- Prevents Damage From Large Debris
- Less Restrictive Than A Cone Filter
- Adds Protection In Tight Places
- Works for Turbos, Superchargers, Piping
- Withstands over 100psi
Important Note: This is not a substitute for a cone filter and is not recommended for street / daily use. This part is only designed to block large objects that cause the most damage. It will not block fine material, such as sand.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
 WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution HD Turbo Screen Shield
Applications: Stainless Steel Wire Mesh Filter for 4" Inlet / Pipe
Torque Solution HD Turbo Screen Shields are the perfect solution to keep your investment safe from rocks or debris without being suffocated by a cone filter. Our screens are made from a sturdy 2x2mm woven 0.63mm thick stainless steel wire screen that is press bent into shape. We then then place them into urethane molds to make a solid and yet flexible 1 piece design that is easily installed onto your turbo, superchargers, or piping.
- 2x2mm / 0.63mm Woven Stainless Steel Mesh
- Molded Urethane Casing
- Stainless Steel Worm Gear Clamp
- Prevents Damage From Large Debris
- Less Restrictive Than A Cone Filter
- Adds Protection In Tight Places
- Works for Turbos, Superchargers, Piping
- Withstands over 100psi
Important Note: This is not a substitute for a cone filter and is not recommended for street / daily use. This part is only designed to block large objects that cause the most damage. It will not block fine material, such as sand.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution HD Turbo Screen Shield
Applications: Stainless Steel Wire Mesh Filter for 5" Inlet / Pipe
Torque Solution HD Turbo Screen Shields are the perfect solution to keep your investment safe from rocks or debris without being suffocated by a cone filter. Our screens are made from a sturdy 2x2mm woven 0.63mm thick stainless steel wire screen that is press bent into shape. We then then place them into urethane molds to make a solid and yet flexible 1 piece design that is easily installed onto your turbo, superchargers, or piping.
- 2x2mm / 0.63mm Woven Stainless Steel Mesh
- Molded Urethane Casing
- Stainless Steel Worm Gear Clamp
- Prevents Damage From Large Debris
- Less Restrictive Than A Cone Filter
- Adds Protection In Tight Places
- Works for Turbos, Superchargers, Piping
- Withstands over 100psi
Important Note: This is not a substitute for a cone filter and is not recommended for street / daily use. This part is only designed to block large objects that cause the most damage. It will not block fine material, such as sand.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Billet Turbo Velocity Stack Shield
Applications: For 4" Inlet
Torque Solution Billet Turbo Velocity Stack Shields are the perfect solution to keep your investment safe from rocks or large debris without being suffocated by a cone filter. Our velocity stack shields are a 1 piece design made from CNC'd 6061-T6 billet aluminum providing approximately a 1" tall horn and a slightly domed hex mesh screen. These not only function as intended, but look like a work of art as well. Designed with an inner upper channel and set screw to fully secure onto your turbos or superchargers.
- CNC'D 6061-T6 Billet Aluminum
- Clear Anodized w/ Engraved Torque Solution Logo
- Inner Locking Channel w/ Bottom Stainless Steel Set Screw
- Prevents Damage From Large Debris
- Less Restrictive Than A Cone Filter
- Withstands over 100psi
Includes:
- Billet Turbo Velocity Stack Shield (1)
- Stainless Steel 5/32" Set Screw (1)
- 2ml Blue Thread Lock (1)
Important Note: This is not a substitute for a cone filter and is not recommended for street / daily use. This part is only designed to block large objects that cause the most damage. It will not block fine material, such as sand.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Billet Turbo Velocity Stack Shield
Applications: For 4" Inlet
Torque Solution Billet Turbo Velocity Stack Shields are the perfect solution to keep your investment safe from rocks or large debris without being suffocated by a cone filter. Our velocity stack shields are a 1 piece design made from CNC'd 6061-T6 billet aluminum providing approximately a 1" tall horn and a slightly domed hex mesh screen. These not only function as intended, but look like a work of art as well. Designed with an inner upper channel and set screw to fully secure onto your turbos or superchargers.
- CNC'D 6061-T6 Billet Aluminum
- Black Anodized w/ Engraved Torque Solution Logo
- Inner Locking Channel w/ Bottom Stainless Steel Set Screw
- Prevents Damage From Large Debris
- Less Restrictive Than A Cone Filter
- Withstands over 100psi
Includes:
- Billet Turbo Velocity Stack Shield (1)
- Stainless Steel 5/32" Set Screw (1)
- 2ml Blue Thread Lock (1)
Important Note: This is not a substitute for a cone filter and is not recommended for street / daily use. This part is only designed to block large objects that cause the most damage. It will not block fine material, such as sand.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Billet Turbo Velocity Stack Shield
Applications: For 4" Inlet
Torque Solution Billet Turbo Velocity Stack Shields are the perfect solution to keep your investment safe from rocks or large debris without being suffocated by a cone filter. Our velocity stack shields are a 1 piece design made from CNC'd 6061-T6 billet aluminum providing approximately a 1" tall horn and a slightly domed hex mesh screen. These not only function as intended, but look like a work of art as well. Designed with an inner upper channel and set screw to fully secure onto your turbos or superchargers.
- CNC'D 6061-T6 Billet Aluminum
- Red Anodized w/ Engraved Torque Solution Logo
- Inner Locking Channel w/ Bottom Stainless Steel Set Screw
- Prevents Damage From Large Debris
- Less Restrictive Than A Cone Filter
- Withstands over 100psi
Includes:
- Billet Turbo Velocity Stack Shield (1)
- Stainless Steel 5/32" Set Screw (1)
- 2ml Blue Thread Lock (1)
Important Note: This is not a substitute for a cone filter and is not recommended for street / daily use. This part is only designed to block large objects that cause the most damage. It will not block fine material, such as sand.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Billet Turbo Velocity Stack Shield
Applications: For 4" Inlet
Torque Solution Billet Turbo Velocity Stack Shields are the perfect solution to keep your investment safe from rocks or large debris without being suffocated by a cone filter. Our velocity stack shields are a 1 piece design made from CNC'd 6061-T6 billet aluminum providing approximately a 1" tall horn and a slightly domed hex mesh screen. These not only function as intended, but look like a work of art as well. Designed with an inner upper channel and set screw to fully secure onto your turbos or superchargers.
- CNC'D 6061-T6 Billet Aluminum
- Purple Anodized w/ Engraved Torque Solution Logo
- Inner Locking Channel w/ Bottom Stainless Steel Set Screw
- Prevents Damage From Large Debris
- Less Restrictive Than A Cone Filter
- Withstands over 100psi
Includes:
- Billet Turbo Velocity Stack Shield (1)
- Stainless Steel 5/32" Set Screw (1)
- 2ml Blue Thread Lock (1)
Important Note: This is not a substitute for a cone filter and is not recommended for street / daily use. This part is only designed to block large objects that cause the most damage. It will not block fine material, such as sand.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Billet Turbo Velocity Stack Shield
Applications: For 4" Inlet
Torque Solution Billet Turbo Velocity Stack Shields are the perfect solution to keep your investment safe from rocks or large debris without being suffocated by a cone filter. Our velocity stack shields are a 1 piece design made from CNC'd 6061-T6 billet aluminum providing approximately a 1" tall horn and a slightly domed hex mesh screen. These not only function as intended, but look like a work of art as well. Designed with an inner upper channel and set screw to fully secure onto your turbos or superchargers.
- CNC'D 6061-T6 Billet Aluminum
- Blue Anodized w/ Engraved Torque Solution Logo
- Inner Locking Channel w/ Bottom Stainless Steel Set Screw
- Prevents Damage From Large Debris
- Less Restrictive Than A Cone Filter
- Withstands over 100psi
Includes:
- Billet Turbo Velocity Stack Shield (1)
- Stainless Steel 5/32" Set Screw (1)
- 2ml Blue Thread Lock (1)
Important Note: This is not a substitute for a cone filter and is not recommended for street / daily use. This part is only designed to block large objects that cause the most damage. It will not block fine material, such as sand.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Billet Turbo Velocity Stack Shield
Applications: For 4" Inlet
Torque Solution Billet Turbo Velocity Stack Shields are the perfect solution to keep your investment safe from rocks or large debris without being suffocated by a cone filter. Our velocity stack shields are a 1 piece design made from CNC'd 6061-T6 billet aluminum providing approximately a 1" tall horn and a slightly domed hex mesh screen. These not only function as intended, but look like a work of art as well. Designed with an inner upper channel and set screw to fully secure onto your turbos or superchargers.
- CNC'D 6061-T6 Billet Aluminum
- Green Anodized w/ Engraved Torque Solution Logo
- Inner Locking Channel w/ Bottom Stainless Steel Set Screw
- Prevents Damage From Large Debris
- Less Restrictive Than A Cone Filter
- Withstands over 100psi
Includes:
- Billet Turbo Velocity Stack Shield (1)
- Stainless Steel 5/32" Set Screw (1)
- 2ml Blue Thread Lock (1)
Important Note: This is not a substitute for a cone filter and is not recommended for street / daily use. This part is only designed to block large objects that cause the most damage. It will not block fine material, such as sand.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Billet Turbo Velocity Stack Shield
Applications: For 4" Inlet
Torque Solution Billet Turbo Velocity Stack Shields are the perfect solution to keep your investment safe from rocks or large debris without being suffocated by a cone filter. Our velocity stack shields are a 1 piece design made from CNC'd 6061-T6 billet aluminum providing approximately a 1" tall horn and a slightly domed hex mesh screen. These not only function as intended, but look like a work of art as well. Designed with an inner upper channel and set screw to fully secure onto your turbos or superchargers.
- CNC'D 6061-T6 Billet Aluminum
- Orange Anodized w/ Engraved Torque Solution Logo
- Inner Locking Channel w/ Bottom Stainless Steel Set Screw
- Prevents Damage From Large Debris
- Less Restrictive Than A Cone Filter
- Withstands over 100psi
Includes:
- Billet Turbo Velocity Stack Shield (1)
- Stainless Steel 5/32" Set Screw (1)
- 2ml Blue Thread Lock (1)
Important Note: This is not a substitute for a cone filter and is not recommended for street / daily use. This part is only designed to block large objects that cause the most damage. It will not block fine material, such as sand.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Billet Turbo Velocity Stack Shield
Applications: For 4" Inlet
Torque Solution Billet Turbo Velocity Stack Shields are the perfect solution to keep your investment safe from rocks or large debris without being suffocated by a cone filter. Our velocity stack shields are a 1 piece design made from CNC'd 6061-T6 billet aluminum providing approximately a 1" tall horn and a slightly domed hex mesh screen. These not only function as intended, but look like a work of art as well. Designed with an inner upper channel and set screw to fully secure onto your turbos or superchargers.
- CNC'D 6061-T6 Billet Aluminum
- Gold Anodized w/ Engraved Torque Solution Logo
- Inner Locking Channel w/ Bottom Stainless Steel Set Screw
- Prevents Damage From Large Debris
- Less Restrictive Than A Cone Filter
- Withstands over 100psi
Includes:
- Billet Turbo Velocity Stack Shield (1)
- Stainless Steel 5/32" Set Screw (1)
- 2ml Blue Thread Lock (1)
Important Note: This is not a substitute for a cone filter and is not recommended for street / daily use. This part is only designed to block large objects that cause the most damage. It will not block fine material, such as sand.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
