|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Multi-Layer Stainless Gasket
Applications: 3" 2 Bolt Universal
Torque Solution Multi-Layer Stainless Steel Gasket for 3" 2 Bolt Exhaust Systems. The multi-layer / fire ring design is much thicker than the OEM, which provides a much better seal and is more forgiving to warped flanges.
- CNC Stainless Steel
- Fire Ring For Added Sealing
- Thicker Than OEM Gaskets
|
Torque Solution Shifter Cable Bushings Applications: Subaru WRX 2015+
Torque Solution continues to push the limits of high performance aftermarket products with our "NEW" Shock Factor Shifter Bushings. Developed to perform under the most extreme conditions, Shock Factor Shifter Bushings bridge the gap between ordinary aluminum, brass, and cheap plastics used in current aftermarket shifter bushings by offering a unique Delrin specifically chosen by Torque Solution engineers to ensure product performance and reliability while drastically reducing shifter end play allowing for crisper, more precise shifts. All this makes it easy for us to stand behind our shifter bushings with a Limited Lifetime Warranty.
Street or at the Track Shock Factor Shifter Bushings will always get you in gear!!!
- Improved 60fts / e.t's - Eliminates excessive Shifter play - Solid feeling in gear change - Street and track torture tested - Installs in under 30 minutes - Life Time Warranty
|
Torque Solution Lower Rear Differential Mount Inserts
Applications: Subaru WRX / STi 2008+
Torque Solution Polyurethane bushings are much harder compared to the OEM units. By replacing them with these harder Polyurethane units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts. - Eliminates the " CLUNK " when shifting hard - Reduces wheel hop / traction loss - Improved 60fts / e.t's - 1000HP+ and 8sec e.t. torture tested - 75A durometer bushings - Limited Lifetime Warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Multi-Layer Stainless Gasket
Applications: Subaru EJ/FA/FB Dual Port Head To Exhaust Manifold
Torque Solution Multi-Layer Stainless Steel Gasket for Subaru Dual Port Head To Exhaust Manifold. The multi-layer / fire ring design is much thicker than the OEM, which provides a much better seal and is more forgiving to warped header flanges.
- CNC Stainless Steel
- Fire Ring For Added Sealing
- Thicker Than OEM Gasket
- Sold As A Pair
|
Torque Solution Flywheel Lock Tool
Application: Subaru Manual Transmission Models
Torque Solution Flywheel Lock Tool for Subaru Manual Transmission vehicles is a nice little tool to have in your tool box. Simply line of the precision cut teeth with the flywheel teeth and bolt to the upper left of the block to keep the flywheel secure when doing clutch jobs or flywheels.
Features: - Durable Laser Cut Steel W/ Zinc Coating
- Locks Flywheel In Place
- Wide range of applications
- Limited Lifetime Warranty
Included Hardware:
- M10-1.25 x 25 Zinc Bolt (2)
Applications: - Subaru Impreza 1993-2021
- Subaru WRX 2002-2014
- Subaru WRX 2015-2021
- Subaru WRX 2022+
- Subaru STi 2004-2021
- Subaru Forester 1998-2010
- Subaru Legacy & Outback 1994-2011
- Saab 9-2X 2005-2006
- Subaru Baja 2004-2006
- Subaru BRZ 2012+
- Subaru Levorg
- Subaru Crosstrek
- Toyota GT86 2012+
- Scion FR-S 2012+
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
 WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Multi-Layer Stainless Gasket
Applications: Subaru FA20 Turbo to J-Pipe
Torque Solution Multi-Layer Stainless Steel Gasket for Subaru FA20 Turbo to J-Pipe. The multi-layer / fire ring design is much thicker than the OEM, which provides a much better seal and is more forgiving to warped flanges.
- CNC Stainless Steel
- Fire Ring For Added Sealing
- Thicker Than OEM Gasket
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Multi-Layer Stainless Gasket
Applications: Subaru FA20 Manifold To Turbo
Torque Solution Multi-Layer Stainless Steel Gasket for Subaru FA20 Manifold To Turbo. The multi-layer / fire ring design is much thicker than the OEM, which provides a much better seal and is more forgiving to warped flanges.
- CNC Stainless Steel
- Fire Ring For Added Sealing
- Thicker Than OEM Gasket
|
Torque Solution Shifter Gate Stop Applications: Subaru WRX 2015+
Torque Solution Shifter Gate Stop for the 2015+ Subaru WRX is perfect for removing the shifter gate slop that is a common issue while in gear. 1st, 2nd, 5th and 6th gear slop is virtually eliminated. Excessive shifter slop can be deceiving as to what gear you are in and by installing our shifter stop it will give you a more sure feeling of knowing what gear you are in.
We also include 2 washers to eliminate the gap left from the factory in the shifter assembly.
- Made from 6061-T6 Billet Aluminum
- Black Anodized w/ "TS" Logo - Eliminates excessive Shifter play - Easy 10-15 min install
- Install Hardware included - Limited Lifetime Warranty
|
Torque Solution Rear Differential Mount Inserts
Applications: Subaru WRX / STi 2008+
Torque Solution Polyurethane bushings are much harder compared to the OEM units. By replacing them with these harder Polyurethane units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts. - Eliminates the " CLUNK " when shifting hard - Reduces wheel hop / traction loss - Improved 60fts / e.t's - 1000HP+ and 8sec e.t. torture tested - 75A durometer bushings - Limited Lifetime Warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Positive Shift Kit
Applications: Subaru WRX 08-14 / STi 08-15
Torque Solution continues to push the limits of high performance
aftermarket products with our "NEW" Positive Shift Kit.
Developed to perform under the most extreme conditions, our Urethane
Components bridge the gap between ordinary rubber and cheap
plastics used in current aftermarket shifter bushings by offering a
unique urethane specifically chosen by Torque Solution engineers to
ensure product performance and reliability while drastically reducing
shifter end play allowing for crisper, more precise shifts. All this
makes it easy for us to stand behind our shifter bushings with a
Limited Lifetime Warranty.
- Improved 60fts / e.t's
- Installs in under 30 Minutes in your garage
- Eliminates excessive Shifter play
- Solid feeling gear changes
- Street and track torture tested
- 75A durometer polyurethane
- Limited Lifetime Warranty
Fits:
SUBARU FORESTER SH MY09-13 INCL TURBO9/2008-8/2013 SUBARU IMPREZA GE SEDAN MY08-11 EXCL WRX & STI9/2007-8/2011 SUBARU IMPREZA GJ SEDAN MY12-14 EXCL WRX & STI9/2011-3/2014 SUBARU IMPREZA GH HATCH MY08-11 EXCL WRX & STI9/2007-8/2011 SUBARU IMPREZA GP HATCH MY12-14 EXCL WRX & STI9/2011-3/2014 SUBARU IMPREZA WRX GR, GV SEDAN MY08-119/2007-8/2011 SUBARU IMPREZA WRX GJ SEDAN MY12-149/2011-3/2014 SUBARU IMPREZA WRX VA SEDAN MY154/2014-ON SUBARU IMPREZA WRX GR, GV HATCH MY08-119/2007-8/2011 SUBARU IMPREZA WRX GP HATCH MY12-149/2011-8/2014 SUBARU IMPREZA STI GV MY08-119/2007-8/2011 SUBARU IMPREZA STI GJ, GP MY12-149/2011-2/2014 SUBARU IMPREZA STI VL9 MY153/2014-ON SUBARU LEGACY BL SEDAN, BP WAGON MY04-09 INCL TURBO9/2003-8/2009 SUBARU LEGACY BM SEDAN, BR WAGON MY10 INCL TURBO9/2009-ON SUBARU LIBERTY BL SEDAN, BP WAGON MY04-09 INCL TURBO9/2003-8/2009 SUBARU LIBERTY BM SEDAN, BR WAGON MY10 INCL TURBO9/2009-ON
|
Torque Solution Short Shifter
Applications: Subaru WRX 2015+ (6 Spd)
Torque Solution Short Shifter Adapter is a direct replacement for the stock shifter plate. Made from CNC'd Steel and Zinc coated to last a lifetime. We designed our adapter to be counter weighted at the pivot point for smoother and have more precise shifts. Installation is quite simple with proper tools compared to other applications.
Features:
- 30% throw reduction
- Countered Weighted Pivot Point Design
- Zinc Coated CNC Steel
- Easy install
- Limited Lifetime Warranty
|
Torque Solution Short Shifter Adapter & Bushing Combo
Applications: Subaru WRX 2015+ (6 Spd)
Torque Solution Short Shifter Adapter and Delrin Shifter Cable Bushing are a direct replacement for the stock shifter plate and rubber shift bushing. Made from CNC'd Steel and Zinc coated to last a lifetime. We designed our adapter to be counter weighted at the pivot point and our Delrin Shifter Cable Bushing helps eliminate the sponginess in shifts caused by the OEM rubber shifter bushing. Combining these parts makes for smoother and more precise shifts. Installation is quite simple with proper tools compared to other applications.
Features:
- 30% throw reduction
- Countered Weighted Pivot Point Design
- Zinc Coated CNC Steel
- Eliminates excessive Shifter play- Solid feeling gear changes
- Easy install
- Limited Lifetime Warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Solid Billet Pitch Stop Mount
Applications: Subaru Sti Wrx Baja Impreza Legacy Outback Forester Tribeca
Torque Solution Solid Billet Pitch Stop Transmission Mount is the perfect complement for the serious enthusiast that demands the most from their vehicle. The Subaru Pitch Mount is found under the factory top-mount intercooler between the firewall and the front end of the transmission. Utilizing our solid pitch mount will help produce crisper gear shifts by preventing the front end of the transmission from pitching up or down, forward and back.
- Solid Billet 6061-T6 Aluminum
- Black anodized / Torque Solution Laser engraved
- Helps Eliminates Wheel Hop / Traction Loss
- Improved 60fts / e.t's
- Limited Lifetime Warranty
|
Torque Solution Blow Off Valve Adapter
Applications: Subaru FA24 2.4T Engines
The Torque Solution blow off valve adapter was designed to give you that atmospheric blow off sound you're looking for on your turbocharged Subaru FA24 2.4T engine. A simple bolt on modification that is compatible with the factory tune as it always partially recirculates and is completely reversible if you ever need to remove it. This adapter is user tunable by the 9 vent holes (3 per side), so you can adjust it to suit your sound preference by adding or removing the included set screw plugs.
- Great sound
- 6061 Billet Aluminum
- Black Anodized w/ TS Logo
- Easy Install
- Mounting Hardware included
- Limited Lifetime Warranty
Includes:
- Billet BOV Spacer (1)
- O-rings (2)
- M6-1.0 x 30 Stainless Socket Cap Bolt (3)
- 10-32 x 1/4 Tunable Stainless Steel Set Screw (9)
- 2mm Hex Key
Fits:
- Subaru WRX 2022+
- Subaru Ascent 2019+
- Subaru Outback XT 2020+
- Subaru Legacy XT 2021+
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Pitch Stop Mount
Applications: Subaru Sti Wrx Baja Impreza Legacy Outback Forester Tribeca
The Subaru Pitch Control Mount is found under the factory top-mount intercooler (installation is simple) between the fire wall and the front end of the transmission. The pitch mount is designed to produce crisper gear shifts by preventing the front end of the transmission from pitching up or down, forward and back.
- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Pitch Stop Mount
Applications: Subaru Sti Wrx Baja Impreza Legacy Outback Forester Tribeca
The Subaru Pitch Control Mount is found under the factory top-mount intercooler (installation is simple) between the fire wall and the front end of the transmission. The pitch mount is designed to produce crisper gear shifts by preventing the front end of the transmission from pitching up or down, forward and back.
- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Blue anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
|
Torque Solution Pitch Stop Mount
Applications: Subaru Sti Wrx Baja Impreza Legacy Outback Forester Tribeca
The Subaru Pitch Control Mount is found under the factory top-mount intercooler (installation is simple) between the fire wall and the front end of the transmission. The pitch mount is designed to produce crisper gear shifts by preventing the front end of the transmission from pitching up or down, forward and back.
- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Red anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
|
Torque Solution Pitch Stop Mount
Applications: Subaru Sti Wrx Baja Impreza Legacy Outback Forester Tribeca
The Subaru Pitch Control Mount is found under the factory top-mount intercooler (installation is simple) between the fire wall and the front end of the transmission. The pitch mount is designed to produce crisper gear shifts by preventing the front end of the transmission from pitching up or down, forward and back.
- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Silver anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Pitch Stop Mount
Applications: Subaru Sti Wrx Baja Impreza Legacy Outback Forester Tribeca
The Subaru Pitch Control Mount is found under the factory top-mount intercooler (installation is simple) between the fire wall and the front end of the transmission. The pitch mount is designed to produce crisper gear shifts by preventing the front end of the transmission from pitching up or down, forward and back.
- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Street and track torture tested
- Purple anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty
|
Torque Solution Silicone Radiator Hose Kit
Applications: Subaru WRX 2022+
Torque Solution Silicone Radiator Hose Kits are a must have for your Subaru. These are the best solution to replace your OEM rubber hoses that tend to degrade, dry up and crack as they age. Our hoses were reverse engineered by using new OEM hoses, so you can rest assured they will be a perfect fit. We also supply new Stainless Steel Breeze Liner Clamps with each hose kit, which will not gouge or dig into the hose.
- Multi-layer Silicone
- (4) Stainless Steel Breeze Liner Clamps
- Limited Lifetime Warranty
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Silicone Radiator Hose Kit
Applications: Subaru WRX 2022+
Torque Solution Silicone Radiator Hose Kits are a must have for your Subaru. These are the best solution to replace your OEM rubber hoses that tend to degrade, dry up and crack as they age. Our hoses were reverse engineered by using new OEM hoses, so you can rest assured they will be a perfect fit. We also supply new Stainless Steel Breeze Liner Clamps with each hose kit, which will not gouge or dig into the hose.
- Multi-layer Silicone
- (4) Stainless Steel Breeze Liner Clamps
- Limited Lifetime Warranty
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Silicone Radiator Hose Kit
Applications: Subaru WRX 2022+
Torque Solution Silicone Radiator Hose Kits are a must have for your Subaru. These are the best solution to replace your OEM rubber hoses that tend to degrade, dry up and crack as they age. Our hoses were reverse engineered by using new OEM hoses, so you can rest assured they will be a perfect fit. We also supply new Stainless Steel Breeze Liner Clamps with each hose kit, which will not gouge or dig into the hose.
- Multi-layer Silicone
- (4) Stainless Steel Breeze Liner Clamps
- Limited Lifetime Warranty
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Solid Billet Aluminum Transmission Mount
Applications: Subaru WRX 2002-2017 / STI 2004-2017
Torque Solution Solid Billet Transmission Mount is the perfect complement for the serious enthusiast that demands the most from their vehicle. Our mounts are made out of high grade billet aluminum material and steel studs. You can rest assure that with our superior material and design you will get optimal performance for years and decades to come. Our solid mounts will keep your engine in place under hard acceleration, cornering, and braking making you feel overall more connected with your vehicle. Whether you have a street, strip or autox/road race built car, Torque Solution mounts will deliver the performance you need under all conditions.
- Solid Billet 6061-T6 Aluminum
- Black anodized / Torque Solution Laser engraved
- Helps Eliminates Wheel Hop / Traction Loss
- Improved 60fts / e.t's
- Limited Lifetime Warranty
|
Torque Solution Billet Aluminum Rear Differential Brace
Applications: Subaru WRX / STI 08+
Torque Solution Billet Aluminum Rear Differential Brace is a must have for your high horsepower or big turbo Subaru. Our billet piece is stronger than the OEM cast brace and includes 75A Durometer Urethane bushings to ensure there is no differential movement. Less drivetrain movement means more power to ground. This will benefit all types of racers whether you are on a road course or at the drag strip.
- 6061 Billet Aluminum
- Black Anodized w/ Engraved Torque Solution Logo
- 75A Urethane Bushings w/ Stainless Steel Pins
- Helps Reduce Wheel Hop
- Reduces Drivetrain Movement
- Limited Lifetime Warranty
Applications:
- Impreza WRX 2008-2014
- Impreza WRX STi 2008-2014
- WRX STI 2015+
- WRX 2015+
- Forester 2013-2015
- Legacy 2000-2008
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Solid Billet Aluminum Rear Differential Brace
Applications: Subaru WRX / STI 08+
Torque Solution Solid Billet Aluminum Rear Differential Brace is a must have for your high horsepower or big turbo Subaru. Our billet piece is stronger than the OEM cast brace and includes Solid Billet Diff Bushings to ensure there is no differential movement. Less drivetrain movement means more power to ground. This will benefit all types of racers whether you are on a road course or at the drag strip.
- 6061 Billet Aluminum
- Black Anodized w/ Engraved Torque Solution Logo
- Includes Solid Billet Diff Bushings w/ Stainless Steel Pins
- Helps Reduce Wheel Hop
- Reduces Drivetrain Movement
- Limited Lifetime Warranty
Applications:
- Impreza WRX 2008-2014
- Impreza WRX STi 2008-2014
- WRX STI 2015+
- WRX 2015+
- Forester 2013-2015
- Legacy 2000-2008
**Urethane inserts sold separately as part # TS-SU-604 Click Here
|
Torque Solution Billet Aluminum Transmission Mount Subaru
Applications: Subaru WRX 2002-2019 / STI 2004-2019
All Torque Solution mounts are made of high grade billet aluminum material, urethane bushings, and stainless steel pins. This is a direct replacement of the OEM transmission mount. You can rest assured that with our superior material and design you will get optimal performance for years and decades to come. The mount features 75 durometer bushings which keep vibrations down to a minimum while keeping your trans in place under hard acceleration, cornering, and braking. Whether you have a street, strip or autox/road race built car, Torque Solution mounts will deliver the performance you need under all conditions.
New lightweight full billet design!!
- Helps Eliminate Wheel Hop / Traction Loss
- Improved 60fts / e.t's
- CNC 6061-T6 Billet Aluminum
- Street and track torture tested
- Black anodized w/ Torque Solution Logo
- 75A durometer bushings
- Limited Lifetime Warranty
|
Torque Solution Rear Lower Control ArmsApplications: Subaru WRX/STI 2008+ / Scion FR-S/Subaru BRZ/Toyota GT86 2013+ Torque Solution Rear Lower Control Arms will help restore the proper suspension geometry for lowered vehicles. The factory control arms do not have the adjustment range needed to compensate when lowering vehicle. This results in poor tire wear and an insufficient contact patch. This kit will provide the additional adjustment needed. These work great for street and track use and do not transmit harsh vibration thru the vehicle. - 6061-T6 Billet Aluminum - Black Anodized w/ Engraved Torque Solution Logo - High Quality Teflon Lined FK Spherical Bearing Rod Ends - Sold as a pair
- Headlight Level Sensor Compatible
- Multi Position Endlink and Shock Mounting
- Limited Lifetime Warranty
Hardware Included:
- M10-1.5 x 90 Zinc Hex Bolt (2)
- M10-1.5 Zinc Nylock Flange Nut (2)
- M12-1.75 x 90 Zinc Hex Bolt (4) - M12-1.75 Stover Locking Flange Nut (4)
Fits:
- Subaru Impreza 2008+
- Subaru Impreza WRX 2008-2014
- Subaru Impreza WRX STI 2008-2014
- Subaru WRX 2015+
- Subaru WRX STI 2015+
- Subaru Crosstrek XV 2013+
- Subaru Forester 2009+
- Subaru Legacy 2010-2014
- Subaru Outback 2010-2014
- Subaru Levorg 2015+
- Subaru BRZ 2013+
- Scion FR-S 2013+
- Toyota GT86 2013+
Install Instructions: CLICK HERE
|
|
|
