Home > Adapters / Brackets / Sensors > Wire Harness > Speed Density / IAT
Sort By:
Page of 1
3/8" NPT Female Aluminum Bung 3/8" NPT Female Aluminum Bung Torque Solution IAT / Speed Density Pigtail Harness: Universal for GM IAT Sensor Connector
Torque Solution Weld Bung: 3/8" (-18) NPT Female Aluminum
MSRP$7.72
Our Price:$6.95
You save $0.77!
Torque Solution Weld Bung
Applications: 3/8" (-18) NPT Female Aluminum

Torque Solution Weld Bungs are perfect to be used with aluminum Valve Cover Breather, Radiators, Oil Pans, Fuel Cell, Cylinder Heads, Intake Manifolds, Dry Sump, custom tank fabrication or any other project that would require weld bungs.

- 6061 Billet Aluminum
- 3/8 (-18) NPT Female Threads
- 1" Overall OD
- Limited Lifetime Warranty

Perfect for IAT or Coolant Sensors!!
Torque Solution Weld Bung
Applications: 3/8" (-18) NPT Female Stainless Steel

Torque Solution Weld Bungs are perfect to be used with aluminum Valve Cover Breather, Radiators, Oil Pans, Fuel Cell, Cylinder Heads, Intake Manifolds, Dry Sump, custom tank fabrication or any other project that would require weld bungs.

- Stainless Steel
- 3/8 (-18) NPT Female Threads
- 1" Overall OD
- Limited Lifetime Warranty

Perfect for IAT or Coolant Sensors!!
Torque Solution IAT / Speed Density Pigtail Harness
Applications: Universal for GM IAT Sensor Connector

Torque Solution IAT / Speed Density Pigtail Harness for GM IAT Sensor Connector. This is perfect for your custom wired in IAT sensor. Our pigtail harness is unique as we provide 1 foot of wire off the sensor and we heat shrink it for protection!! If you need it shorter you can trim to suit your needs.

- Plug and Play Adapter Harness
- Direct Fit for GM Style IAT Sensor
- Waterproof Connector
- 1' Length
- High Temp Heat Shrink

- Limited Lifetime Warranty

Fits:
- AC Delco / GM Part #'s: 25036751, 5S1007, AJ0005, TS10077, 213-190, 25037334, 213190, 213192, 25037034, 25037225, 5744430, 8250373340, SU107, 8250367510, 213191, 25036950, 25095187, 3854527, 38545273
- AEM 30-2010
- Haltech HT-010204
- Other GM Style IAT Sensors



PROPOSITION 65

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.

WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)

Torque Solution Fast Response IAT Sensor: Universal GM Style IAT Sensor 3/8" NPT Female Aluminum Bung Torque Solution Fast Response SD IAT Sensor Kit: Universal GM Style IAT Sensor w/ Pigtail  and Stainless Weld Bung
Torque Solution Titanium Weld Bung: 3/8" (-18) NPT Female
MSRP$22.21
Our Price:$19.99
You save $2.22!
Torque Solution Fast Response IAT Sensor
Applications: Universal GM Style IAT Sensor

Torque Solution Fast Response IAT Sensor is the perfect choice when converting to a speed density setup or just needing to replace your existing GM IAT sensor. Pair this with 1 of our compatible wire harness solutions and weld-on 3/8" bungs for the complete package.

- Fast Response
- Direct Fit for GM Style IAT Sensor

- 1 Year Warranty
Torque Solution Weld Bung
Applications: 3/8" (-18) NPT Female Aluminum

Torque Solution Weld Bungs are perfect to be used with aluminum Valve Cover Breather, Radiators, Oil Pans, Fuel Cell, Cylinder Heads, Intake Manifolds, Dry Sump, custom tank fabrication or any other project that would require weld bungs.

- 6061 Billet Aluminum
- 3/8 (-18) NPT Female Threads
- 1" Overall OD
- Limited Lifetime Warranty

Perfect for IAT or Coolant Sensors!!
Torque Solution Fast Response SD IAT Sensor KIT
Applications: Universal GM Style IAT Sensor w/ Pigtail and Stainless Steel Weld Bung

Torque Solution Fast Response IAT Sensor is the perfect choice when converting to a speed density setup or just needing to replace your existing GM IAT sensor. This kit comes paired with our pigtail wire harness and stainless steel weld-on 3/8" bung for the complete package.

- Fast Response
- Torque Solution Direct Fit for GM Style IAT Sensor
-
Torque Solution IAT / Speed Density Pigtail Harness
- Torque Solution Weld Bung: 3/8" (-18) NPT Female Stainless Steel
- 1 Year Warranty
Torque Solution PNP Speed Density Adapter Harness: Subaru WRX 08-14, STI 08-21 Torque Solution PNP Speed Density Adapter Harness: Subaru WRX 02-07, STI 02-07, FXT 05-08, LGT 05-09 Torque Solution PNP Hybrid Speed Density Adapter Harness: Subaru WRX 08-14, STI 08-21
Torque Solution Map Sensor Adapter
Applications: Subaru WRX 2002-2007, STI 2004-2018, Forester XT 2004-2008

Torque Solution Map Sensor Adapter allows you to easily switch the OEM sensor for a 1/8" NPT male threaded map sensor, such as AEM 3.5 Bar Part# 30-2130-50 or AEM 5 Bar Part# 30-2130-75.

- 6061 Billet Aluminum
- Black Anodized
- 1/8" NPT Female thread

- Zinc Install Hardware Included
- Limited Lifetime Warranty

**Protune required to run non OEM map sensor.
Torque Solution Map Sensor Adapter
Applications: Subaru WRX 2002-2007, STI 2004-2018, Forester XT 2004-2008

Torque Solution Map Sensor Adapter allows you to easily switch the OEM sensor for a 1/8" NPT male threaded map sensor, such as AEM 3.5 Bar Part# 30-2130-50 or AEM 5 Bar Part# 30-2130-75.

- 6061 Billet Aluminum
- Black Anodized
- 1/8" NPT Female thread

- Zinc Install Hardware Included
- Limited Lifetime Warranty

**Protune required to run non OEM map sensor.
Torque Solution PNP Hybrid Speed Density Adapter Harness
Applications: Subaru WRX 2008-2014, STI 2008-2021

Torque Solution PNP Hybrid Speed Density Adapter Harness allows you to easily switch from MAF setup to Speed Density without having to hack up your OEM harness. Our adapter harness is a direct plug and play with the OEM harness plug and GM Style IAT sensor, such as AEM part# 30-2010. Requires a bung to be welded for the IAT sensor either on the throttle body side of your TMIC or on your FMIC upper charge pipe right before the throttle body. This hybrid harness provides your tuner more flexibility in tuning between MAF, Speed Density or a combination of both by providing the most accurate intake air temps. This harness is best suited for vehicles equipped with intakes still utilizing the OEM MAF sensor.

- Plug and Play Adapter Harness
- Direct Fit
- Waterproof Connectors
- 48" Length to be compatible with Top or Front Mount Intercoolers
- High Temp heat Shrink Tubing

- Limited Lifetime Warranty

**Protune required to run a speed density setup.

Fits:
- Subaru WRX 2008-2014 (USDM/JDM)
- Subaru WRX STi 2008+ (USDM/JDM)
- Subaru Forester XT 2009-2014
- Subaru Legacy GT 2010-2012
- Subaru Outback XT 2010-2012



PROPOSITION 65

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.

WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)

Torque Solution PNP Hybrid Speed Density Adapter Harness: Subaru WRX 02-07, STI 02-07, FXT 05-08, LGT 05-09 Torque Solution PNP Speed Density Kit (Aluminum Bung): Subaru WRX 08-14, STI 08-21 Torque Solution PNP Speed Density Kit (Stainless Bung): Subaru WRX 08-14, STI 08-21
Torque Solution Map Sensor Adapter
Applications: Subaru WRX 2002-2007, STI 2004-2018, Forester XT 2004-2008

Torque Solution Map Sensor Adapter allows you to easily switch the OEM sensor for a 1/8" NPT male threaded map sensor, such as AEM 3.5 Bar Part# 30-2130-50 or AEM 5 Bar Part# 30-2130-75.

- 6061 Billet Aluminum
- Black Anodized
- 1/8" NPT Female thread

- Zinc Install Hardware Included
- Limited Lifetime Warranty

**Protune required to run non OEM map sensor.
Torque Solution PNP Speed Density Adapter Harness w/ IAT Sensor and Aluminum Weld Bung
Applications: Subaru WRX 2008-2014, STI 2008-2021

Torque Solution PNP Speed Density Kit allows you to easily switch from MAF setup to Speed Density without having to hack up your OEM harness. Our adapter harness makes the kit a direct plug and play setup with no wire cutting or splicing required!! Requires the provided bung for the IAT sensor to be welded either on the throttle body side of your TMIC (choose location and mark TMIC before removing it) or on your FMIC upper charge pipe right before the throttle body.

- Plug and Play Adapter Harness
- Direct Fit
- Waterproof Connectors
- 39" Length
- High Temp Wire Loom
- Fast Response IAT Sensor
- Aluminum IAT Weld-On Bung

- 1 Year Warranty
Torque Solution PNP Speed Density Adapter Harness w/ IAT Sensor and Stainless Steel Weld Bung
Applications: Subaru WRX 2008-2014, STI 2008-2021

Torque Solution PNP Speed Density Kit allows you to easily switch from MAF setup to Speed Density without having to hack up your OEM harness. Our adapter harness makes the kit a direct plug and play setup with no wire cutting or splicing required!! Requires the provided bung for the IAT sensor to be welded either on the throttle body side of your TMIC (choose location and mark TMIC before removing it) or on your FMIC upper charge pipe right before the throttle body.

- Plug and Play Adapter Harness
- Direct Fit
- Waterproof Connectors
- 39" Length
- High Temp Wire Loom
- Fast Response IAT Sensor
- Stainless Steel IAT Weld-On Bung

- 1 Year Warranty
Torque Solution PNP Speed Density Kit (Titanium Bung): Subaru WRX 08-14, STI 08-21
Torque Solution PNP Speed Density Adapter Harness w/ IAT Sensor and Titanium Weld Bung
Applications: Subaru WRX 2008-2014, STI 2008-2021

Torque Solution PNP Speed Density Kit allows you to easily switch from MAF setup to Speed Density without having to hack up your OEM harness. Our adapter harness makes the kit a direct plug and play setup with no wire cutting or splicing required!! Requires the provided bung for the IAT sensor to be welded either on the throttle body side of your TMIC (choose location and mark TMIC before removing it) or on your FMIC upper charge pipe right before the throttle body.

- Plug and Play Adapter Harness
- Direct Fit
- Waterproof Connectors
- 39" Length
- High Temp Wire Loom
- Fast Response IAT Sensor
- Titanium IAT Weld-On Bung

- 1 Year Warranty

Includes:
- Torque Solution GM Style IAT Sensor
- Torque Solution IAT / Speed Density Pigtail Harness
- Torque Solution Weld Bung: 3/8" (-18) NPT Female Titanium

**Protune required to run a speed density setup.

Fits:
- Subaru WRX 2008-2014 (USDM/JDM)
- Subaru WRX STi 2008+ (USDM/JDM)



PROPOSITION 65

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.

WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)