Crosstrek 2018+

Home > Select Your Car > SUBARU > Crosstrek 2018+

Sort By:

Page of 1


Torque Solution Flywheel Lock Tool: Subaru Manual Trans MSRP:$27.77 Our Price:$24.99 You save $2.78!		Torque Solution Auto Headlight Level Adjustment Rod: 55-59mm MSRP$38.88 Our Price:$34.99 You save $3.89!		Torque Solution Lightweight Alternator Pulley: Subaru FA / FB Engines MSRP$55.54 Our Price:$49.99 You save $5.55!

Torque Solution Flywheel Lock Tool Application: Subaru Manual Transmission Models Torque Solution Flywheel Lock Tool for Subaru Manual Transmission vehicles is a nice little tool to have in your tool box. Simply line of the precision cut teeth with the flywheel teeth and bolt to the upper left of the block to keep the flywheel secure when doing clutch jobs or flywheels. Features: - Durable Laser Cut Steel W/ Zinc Coating - Locks Flywheel In Place - Wide range of applications - Limited Lifetime Warranty Included Hardware: - M10-1.25 x 25 Zinc Bolt (2) Applications: - Subaru Impreza 1993-2021 - Subaru WRX 2002-2014 - Subaru WRX 2015-2021 - Subaru WRX 2022+ - Subaru STi 2004-2021 - Subaru Forester 1998-2010 - Subaru Legacy & Outback 1994-2011 - Saab 9-2X 2005-2006 - Subaru Baja 2004-2006 - Subaru BRZ 2012+ - Subaru Levorg - Subaru Crosstrek - Toyota GT86 2012+ - Scion FR-S 2012+ PROPOSITION 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)		Torque Solution Auto Headlight Level Adjustment Rod Applications: See Application List Torque Solution Auto Headlight Level Adjustment Rod is a must have part for lowered vehicles that have auto adjustable headlights. When lowering your car the factory level arm will make the headlights point lower on the ground closer to the car, which results in poor visibility. Installing our adjustable rod allows you to restore your lowered cars headlight beams to the proper position on the road for increased visibility. - Easy Install - 55-59mm Adjustment Range - Perfect for Lowered Vehicles - Restores Default Headlight Level - Limited Lifetime Warranty Includes: - Zinc Rod End w/ M6-1.0 Stud (2) - M6 Zinc Male to Male Double Adjuster (1) - M6 Zinc Jam Nut (2) - M6-1.0 Zinc Nyloc Nut (2) - M6 Zinc Fender Washer (4) Fits: - Mazda Miata MX-5 2016-2017 only (ND1) - Subaru Impreza WRX Hatchback 2008-2014 (GR) - Subaru Impreza WRX STI Hatchback 2008-2014 (GR) - Subaru Impreza WRX Sedan 2011-2014 (GV) - Subaru Impreza WRX STI Sedan 2011-2014 (GV) - Subaru WRX 2015-2021 (VA) - Subaru WRX STI 2015-2021 (VA) - Subaru Crosstrek 2013-2017 (GP, 1st Gen) - Subaru Crosstrek 2018-2023 (GT, 2nd Gen) - Subaru Forester 2.5L 2014-2018 - Subaru Forester XT 2.0L Turbo 2014-2018 - Toyota Corolla Sedan 1.8L 2020-2021 - Toyota Corolla Hatchback 1.8L 2019-2024 - Toyota CH-R 2.0L 2018-2022 - Toyota Prius 2016-2022 PROPOSITION 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)		Torque Solution Lightweight Alternator Pulley Applications: Subaru FA / FB Engines (See Application Guide Below) Torque Solution Lightweight Alternator Pulley is a nice and simple upgrade for Subaru FA / FB Engines. Less engine rotational weight is a great way to improve throttle response and free up lost HP and TQ. This upgrade also can fix or prevent a failed OEM clutch-style pulley which leads to noises, charging issues, uneven belt wear, and jumpy belts. - 6061 Billet Aluminum - Black Anodized w/ Torque Solution logo - Weighs Just 0.2 lbs - Fix / Prevent A Damaged OEM Clutch Pulley - Limited Lifetime Warranty Includes: - Billet Aluminum Alternator Pulley (1) - M17 Zinc flange Hex Nut (1) Fits: - Subaru WRX 2015-2021 - Subaru WRX 2022-2025 - Subaru Forester XT 2014-2018 - Subaru Ascent 2019-2025 - Subaru Legacy 2021-2025 - Subaru Legacy XT 2021-2025 - Subaru Outback 2021-2025 - Subaru Outback XT 2021-2025 - Subaru Outback Wilderness 2022-2025 PROPOSITION 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)


Torque Solution Rear Toe Link / Arm Eccentric Lockout: Subaru WRX/STI / Scion FR-S / Subaru BRZ / Toyota GT86 GR86 MSRP$66.65 Our Price:$59.99 You save $6.66!		Torque Solution Lightweight Water Pump Pulley: Subaru FA20DIT / FB20 Engines MSRP$88.88 Our Price:$79.99 You save $8.89!		Torque Solution Pinch Weld Saver Jack Pads: Subaru (multiple fitments) / Toyota / Mazda MSRP:$109.99 Our Price:$98.99 You save $11.00!

Torque Solution Rear Toe Link / Arm Eccentric Lockout Applications: See application list Torque Solution Rear Toe Link / Arm Eccentric Lockout is the perfect addition to our billet toe arms. These replace the factory camber bolts to allow you to lock your toe in place and only utilize the toe arms to adjust the alignment. Requires NO modification to chassis and is a direct bolt on replacement part. Can be used on daily driven street cars and is highly recommended for Street or Track setups. - 6061 Billet Aluminum - Black anodized - Install Hardware Included - Limited Lifetime Warranty Includes: - Billet Eccentric Lockout (4) - M14-1.5 x 70 Zinc Hex Bolt (2) - M14-1.5 Zinc Stover Nut (2) Fits: - Subaru Impreza WRX 2008-2014 - Subaru Impreza WRX STI 2008-2014 - Subaru WRX 2015-2021 - Subaru WRX 2022+ - Subaru WRX STI 2015+ - Subaru BRZ 2013+ - Subaru BRZ 2021+ - Subaru Outback 2020+ - Subaru Legacy 2010-2019 - Subaru Legacy 2020+ - Subaru Impreza 2017+ - Subaru Forester 2009-2018 - Subaru Forester 2019+ - Subaru Crosstrek 2018+ - Scion FR-S 2013+ - Toyota GT86 2013+ - Toyota GR86 2021+ Works with Torque Solution part #'s: TS-SU-464 ; TS-SU-464-9. PROPOSITION 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)		Torque Solution Lightweight Water Pump Pulley Applications: Subaru FA20DIT / FB20 Engines (See Application Guide Below) Torque Solution Lightweight Water Pump Pulley is a nice and simple upgrade for Subaru FA20DIT / FB20 Engines. Our pulley is approximately 37% lighter than the OEM pulley. Less engine rotational weight is a great way to improve throttle response and free up lost HP and TQ. Easy install by simply swapping in place of the OEM pulley. - 6061 Billet Aluminum - Black Anodized w/ Torque Solution logo - Weighs Just Under 0.5 lbs - Approximately 37% Lighter Than OEM - Easy To Install - Limited Lifetime Warranty Includes: - Billet Aluminum Water Pump Pulley (1) Fits: - Subaru WRX 2015-2021 - Subaru Forester XT 2014-2018 - Subaru Impreza 2017-2023 - Subaru Crosstrek 2018-2020 PROPOSITION 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)		Torque Solution Pinch Weld Saver Jack Pads Applications: (multiple fitments) Torque Solution Pinch Weld Saver Jack Pads are designed to fit the pinch welds on your vehicles jack points. Our jack pads are easy to install with the supplied hardware to mount them permanently in place. We also integrated a large knurl pattern into the billet to help prevent any slippage when jacking. Our jack pads will help prevent damage to your vehicles pinch weld and/or rocker panel that can occur when using a hydraulic jack. Each Jack Pad is made from 6061 billet aluminum and anodized black for corrosion resistance. We also supply a tool to be able to also use with the OEM jack when needed without needing to remove a jack pad. - 6061 Billet Aluminum - Black Anodized W/ Torque Solution logo - Stainless Steel Hardware - Prevents Flattened Pinch Welds - Easy To Install - Limited Lifetime Warranty Includes: - Billet Aluminum Jack Pad 848a (4) - Billet Aluminum OEM Jack Adapter 848b (1) - M6 x 16 Stainless Steel Socket Cap Bolt (8) - Blue Thread Locker (1) Fits: - Mazda MX-5 Miata NA 1990-1997 - Mazda MX-5 Miata NB 1998-2004 - Mazda MX-5 Miata NC 2005-2014 - Mazda MX-5 Miata ND 2015+ - Toyota Corolla 2020+ - Toyota GR Corolla 2023+ - Toyota GR 86 2022+ - Scion FR-S 2013-2020 - Subaru Ascent 2019+ - Subaru BRZ 2013-2020 - Subaru BRZ 2022+ - Subaru Crosstrek 2013+ - Subaru Forester 1997+ (all models) - Subaru Impreza 1993+ (all models) - Subaru Legacy 1990+ (all models) - Subaru Outback 1995+ (all models) - Subaru WRX 2008-2014 - Subaru WRX 2015-2021 - Subaru WRX 2022+ - Subaru STI 2008-2014 - Subaru STI 2015-2021 Plus many more.... This part may fit many other vehicles not listed above. Simply measure your pinch weld to confirm!! These will fit pinch welds that measure 3.8mm-9 65mm (0.150"-0.380") thick and a minimum height of 15.25mm (0.600"). PROPOSITION 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)


Torque Solution Billet Chromoly Clutch Fork: BRZ / FR-S / GT86 / GR86 / Various Subaru MSRP$193.32 Our Price:$173.99 You save $19.33!		Torque Solution Short Shifter: Subaru WRX 2015+ / Crosstrek 2018+ MSRP$211.10 Our Price:$189.99 You save $21.11!		Torque Solution Rear Toe Link / Arm Kit: Subaru WRX 2022+ MSRP$444.43 Our Price:$399.99 You save $44.44!

Torque Solution Billet Chromoly Clutch Fork Applications: BRZ / FR-S / GT86 / GR86 2013-2025 / Various Subaru (see application list) Torque Solution Billet Chromoly Clutch Fork is the perfect solution to replace the failure prone OEM stamped steel clutch fork. Rest assured you will not be left stranded with our CNC'd chromoly unit. - CNC Billet 4130 Chromoly Steel - Heat Treated For Strength - Nickel Plated For Corrosion Resistance - Limited Lifetime Warranty Fits: - Subaru BRZ 2013-2021 - Subaru BRZ 2022-2025 - Scion FR-S 2013-2016 - Toyota GT86 2013-2021 - Toyota GR86 2022-2025 - Subaru Baja 2.5L N/A 2003-2006 - Subaru Baja 2.5L Turbo 2004-2006 - Subaru Crosstrek 2013-2017 - Subaru Crosstrek 2018-2023 - Subaru Forester 2.5L 1999-2013 - Subaru Forester 2.5L 6MT 2014-2018 - Subaru Impreza 2.0L / 2.5L 5MT 1999-2014 - Subaru Impreza 2.0L 5MT 2015-2023 - Subaru Legacy 2.5L 5MT 1999-2009 - Subaru Legacy 2.5L 6MT 2010-2014 - Subaru Legacy GT 2.5L Turbo 6MT 2010-2012 - Subaru Outback 2.5L 5MT 1999-2009 - Subaru Outback 2.5L 6MT 2010-2014 - Any Model using Subaru OEM Part #(s) 30530AA020, 30530AA021 and 30531AA220 PROPOSITION 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)		Torque Solution Short Shifter (Revised 03/2023) Applications: Subaru WRX 2015+ / Crosstrek 2018+ Torque Solution short throw shifter is a direct replacement for your long throw stock unit. Our shifters are made from CNC stainless steel and are tig welded in a precision jig. The reverse lockout is CNC machined 6061 billet aluminum and then anodized black. Our design will reduce overall shifter height and throw by 35% resulting in shorter, faster, and more precise shifts. - 35% Throw Reduction - Stainless Steel Shifter - Precision Tig Welded - 6061 Billet Aluminum Reverse Lockout - Black Anodized w/ Torque Solution Logo - Rubber O-Ring Dampened Reverse Lockout Fits: - Subaru WRX 2015-2021 w/ 6 Speed Manual - Subaru WRX 2022+ w/ 6 Speed Manual - Subaru Crosstrek 2018+ w/ 6 Speed Manual PROPOSITION 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)		Torque Solution Spherical Bearing Rear Toe Link/Arm Kit Applications: See Application List Torque Solution Rear Toe Link/Arm Kit will help restore the proper suspension geometry for lowered vehicles. The factory control arms do not have the adjustment range needed to compensate when lowering vehicle. This results in poor tire wear and an insufficient contact patch. This kit will provide the additional adjustment needed. These work great for street and track use and do not transmit harsh vibration thru the vehicle. - 6061-T6 Billet Aluminum - Black Anodized w/ Torque Solution Logo - High Quality Teflon Lined FK Spherical Bearing Rod Ends - Stainless Steel Spacers - Sold as a pair - Limited Lifetime Warranty Includes: - Assembled Billet Aluminum Toe Arm (2) - M12-1.75 x 90 Grade 10.9 Zinc Hex Bolt (2) - M12-1.75 Zinc Stover Flange Locking Nut (2) Fits: - Subaru WRX 2022+ - Subaru Outback 2020+ - Subaru Impreza 2017+ - Subaru Legacy 2020+ - Subaru Crosstrek 2018+ - Subaru Forester 2019+ - Replaces Subaru OEM Part #: 20250-FL010 PROPOSITION 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)