|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Billet Aluminum Hose Blanking Plug
Applications: Universal 32mm / 1.25 inch
Torque Solution Billet Aluminum Hose Blanking Plug allows you to plug the hose or intake tube which recirculates when going from non atmospheric recirculating BOV to an atmospheric blow off or diverter valve.
- 6061-T6 Billet Aluminum
- Fits Hose ID 32mm / 1.25 inch
- Barbed For A Secure Fit and Seal
- Limited Lifetime Warranty
**Important Note: Recommended to be used in conjunction with a hose clamp (not included).
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
 WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Billet Aluminum Hose Blanking Plug
Applications: Universal 25mm / 1 inch
Torque Solution Billet Aluminum Hose Blanking Plug allows you to plug the hose or intake tube which recirculates when going from non atmospheric recirculating BOV to an atmospheric blow off or diverter valve.
- 6061-T6 Billet Aluminum
- Fits Hose ID 25mm / 1 inch
- Barbed For A Secure Fit and Seal
- Limited Lifetime Warranty
**Important Note: Recommended to be used in conjunction with a hose clamp (not included).
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Billet Aluminum Hose Blanking Plug
Applications: Universal 29mm / 1.15 inch
Torque Solution Billet Aluminum Hose Blanking Plug allows you to plug the hose or intake tube which recirculates when going from non atmospheric recirculating BOV to an atmospheric blow off or diverter valve.
- 6061-T6 Billet Aluminum
- Fits Hose ID 29mm / 1.15 inch
- Barbed For A Secure Fit and Seal
- Limited Lifetime Warranty
**Important Note: Recommended to be used in conjunction with a hose clamp (not included).
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Billet Aluminum Hose Blanking Plug
Applications: Universal 34mm / 1.34 inch
Torque Solution Billet Aluminum Hose Blanking Plug allows you to plug the hose or intake tube which recirculates when going from non atmospheric recirculating BOV to an atmospheric blow off or diverter valve.
- 6061-T6 Billet Aluminum
- Fits Hose ID 34mm / 1.34 inch
- Barbed For A Secure Fit and Seal
- Limited Lifetime Warranty
**Important Note: Recommended to be used in conjunction with a hose clamp (not included).
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Billet Aluminum Hose Blanking Plug
Applications: Universal 38mm / 1.5 inch
Torque Solution Billet Aluminum Hose Blanking Plug allows you to plug the hose or intake tube which recirculates when going from non atmospheric recirculating BOV to an atmospheric blow off or diverter valve.
- 6061-T6 Billet Aluminum
- Fits Hose ID 38mm / 1.5 inch
- Barbed For A Secure Fit and Seal
- Limited Lifetime Warranty
**Important Note: Recommended to be used in conjunction with a hose clamp (not included).
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Throttle Body Adapter
Applications: Subaru WRX 01-05 DBC to DBW Intake Manifold
Torque Solution Throttle Body Adapter for Subaru WRX 01-05 Drive By Cable to Drive By Wire Intake Manifold is the perfect addition for those wanting to run a newer or aftermarket IM on there Subaru that has a cable driven throttle body.
- CNC'd 6061 Billet Aluminum
- Clear Anodized For Added Corrosion Resistance
- O-ring Gasket for IM Side
- Provision In Spacer For Proper IAC Valve Flow
- 13mm Thick
- Limited Lifetime Warranty
Includes:
- Billet Spacer (1)
- O-ring (1)
- M6-1.0 x 55 Stainless Steel Socket Cap (4)
- M6 Stainless Steel Flat Washer (4)
Fits:
- Subaru WRX 2001-2005
- Subaru WRX STI 2001-2002
- Any Subaru model that utilizes gasket 16175AA223 and a drive by cable throttle body
**Custom brackets will be required to assist with cable mounting for the DBC throttle body.
**Requires simple modification to the drive by cable throttle body gasket part # 16175AA223 (not included). Simply place the gasket over the spacer and mark the 2 locations to cut the gasket for clearance of the IAC provision in the spacer.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Billet Aluminum Hose Blanking Plug Set
Applications: Universal 5 Sizes 25 thru 38mm / 1 thru 1.5 inch
Torque Solution Billet Aluminum Hose Blanking Plug allows you to plug the hose or intake tube which recirculates when going from non atmospheric recirculating BOV to an atmospheric blow off or diverter valve.
- 6061-T6 Billet Aluminum
- 5 Sizes 25 thru 38mm / 1 thru 1.5 inch
- Barbed For A Secure Fit and Seal
- Limited Lifetime Warranty
Includes:
- TS-UNI-823A: 25mm / 1 inch
- TS-UNI-823B: 29mm / 1.15 inch
- TS-UNI-823C: 32mm / 1.25 inch
- TS-UNI-823D: 34mm / 1.34 inch
- TS-UNI-823E: 38mm / 1.5 inch
**Important Note: Recommended to be used in conjunction with a hose clamp (not included).
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Big Bore 76mm Throttle Body Adapter
Applications: Subaru EJ Standard Bore Intake Manifolds
Torque Solution Big Bore 76mm Throttle Body Adapter for Subaru EJ engines using a standard bore intake manifold. Our adapter allows you to swap to a Toyota 76mm big bore throttle body which provides a 25% increase in size over OEM. Made from CNC billet aluminum that we anodize for corrosion resistance, provide o-ring gaskets for a leak free seal, and all the necessary hardware to complete the install.
- CNC'd 6061 Billet Aluminum
- Anodized For Added Corrosion Resistance
- O-ring Gaskets For A Leak Free Seal
- Limited Lifetime Warranty
Includes:
- Billet Spacer (1)
- Large O-ring (2)
- Small O-ring (4) (holds m6x20 screws in place on spacer)
- M6-1.0 x 20 Low Profile Zinc Socket Cap Bolt (4) (bolts spacer to IM)
- M6-1.0 x 50 Stainless Steel Socket Cap Bolt (4) (bolts the TB to the spacer)
- M6 Zinc Flat Washer (4) (For TB to spacer)
- Rivet (7) (to rivet the OEM TB motor to the big bore TB)
- M4 Nylock Nut (used as rivet spacer tool for center of motor cover near harness plug to TB)
Confirmed To Fit The Following Intake Manifolds:
- Subaru STI OEM Intake Manifold
- Torque Solution Intake Manifold
- Cosworth Intake Manifold
- AMS Intake Manifold
Confirmed to work the Big Bore TB Part #'s:
- Toyota 22030-0S010 / 220300S010
- Toyota 22030-0F010 / 220300F010
*May work with other Toyota TB's, but the 2 above are confirmed.
Fits:
- Subaru STI 2004-2005 (Requires 2006+ riveted throttle body)
- Subaru STI 2006-2021
- Subaru WRX 2006-2007
- Subaru WRX 2008-2014 (must swap to a confirmed fit intake manifold)
- Subaru Forester XT 2004-2008
Important Install Notes:
- Intended for high HP builds.
- First consult with your tuner to ensure they will be able to make this TB setup work for you.
- You must swap over the motor from a Subaru DBW throttle body found on a 2006-21 STI, 2006-07 WRX, and 2004-08 Forester XT. - Must have FMIC piping. (piping modification may be necessary) - You will need a new transition coupler and clamp to fit the big bore TB (3.5") to your piping. - You will need an aftermarket MAP sensor and relocate it to the intake manifold or a vacuum block. - You will need to have your tuner adjust your tune for the big bore TB and aftermarket MAP sensor.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Big Bore 76mm Throttle Body Adapter
Applications: Subaru EJ Standard Bore Intake Manifolds
Torque Solution Big Bore 76mm Throttle Body Adapter for Subaru EJ engines using a standard bore intake manifold. Our adapter allows you to swap to a Toyota 76mm big bore throttle body which provides a 25% increase in size over OEM. Made from CNC billet aluminum that we anodize for corrosion resistance, provide o-ring gaskets for a leak free seal, and all the necessary hardware to complete the install.
- CNC'd 6061 Billet Aluminum
- Anodized For Added Corrosion Resistance
- O-ring Gaskets For A Leak Free Seal
- Limited Lifetime Warranty
Includes:
- Billet Spacer (1)
- Large O-ring (2)
- Small O-ring (4) (holds m6x20 screws in place on spacer)
- M6-1.0 x 20 Low Profile Zinc Socket Cap Bolt (4) (bolts spacer to IM)
- M6-1.0 x 50 Stainless Steel Socket Cap Bolt (4) (bolts the TB to the spacer)
- M6 Zinc Flat Washer (4) (For TB to spacer)
- Rivet (7) (to rivet the OEM TB motor to the big bore TB)
- M4 Nylock Nut (used as rivet spacer tool for center of motor cover near harness plug to TB)
Confirmed To Fit The Following Intake Manifolds:
- Subaru STI OEM Intake Manifold
- Torque Solution Intake Manifold
- Cosworth Intake Manifold
- AMS Intake Manifold
Confirmed to work the Big Bore TB Part #'s:
- Toyota 22030-0S010 / 220300S010
- Toyota 22030-0F010 / 220300F010
*May work with other Toyota TB's, but the 2 above are confirmed.
Fits:
- Subaru STI 2004-2005 (Requires 2006+ riveted throttle body)
- Subaru STI 2006-2021
- Subaru WRX 2006-2007
- Subaru WRX 2008-2014 (must swap to a confirmed fit intake manifold)
- Subaru Forester XT 2004-2008
Important Install Notes:
- Intended for high HP builds.
- First consult with your tuner to ensure they will be able to make this TB setup work for you.
- You must swap over the motor from a Subaru DBW throttle body found on a 2006-21 STI, 2006-07 WRX, and 2004-08 Forester XT.
- Must have FMIC piping. (piping modification may be necessary)
- You will need a new transition coupler and clamp to fit the big bore TB (3.5") to your piping.
- You will need an aftermarket MAP sensor and relocate it to the intake manifold or a vacuum block.
- You will need to have your tuner adjust your tune for the big bore TB and aftermarket MAP sensor.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Big Bore 76mm Throttle Body Adapter
Applications: Subaru EJ Standard Bore Intake Manifolds
Torque Solution Big Bore 76mm Throttle Body Adapter for Subaru EJ engines using a standard bore intake manifold. Our adapter allows you to swap to a Toyota 76mm big bore throttle body which provides a 25% increase in size over OEM. Made from CNC billet aluminum that we anodize for corrosion resistance, provide o-ring gaskets for a leak free seal, and all the necessary hardware to complete the install.
- CNC'd 6061 Billet Aluminum
- Anodized For Added Corrosion Resistance
- O-ring Gaskets For A Leak Free Seal
- Limited Lifetime Warranty
Includes:
- Billet Spacer (1)
- Large O-ring (2)
- Small O-ring (4) (holds m6x20 screws in place on spacer)
- M6-1.0 x 20 Low Profile Zinc Socket Cap Bolt (4) (bolts spacer to IM)
- M6-1.0 x 50 Stainless Steel Socket Cap Bolt (4) (bolts the TB to the spacer)
- M6 Zinc Flat Washer (4) (For TB to spacer)
- Rivet (7) (to rivet the OEM TB motor to the big bore TB)
- M4 Nylock Nut (used as rivet spacer tool for center of motor cover near harness plug to TB)
Confirmed To Fit The Following Intake Manifolds:
- Subaru STI OEM Intake Manifold
- Torque Solution Intake Manifold
- Cosworth Intake Manifold
- AMS Intake Manifold
Confirmed to work the Big Bore TB Part #'s:
- Toyota 22030-0S010 / 220300S010
- Toyota 22030-0F010 / 220300F010
*May work with other Toyota TB's, but the 2 above are confirmed.
Fits:
- Subaru STI 2004-2005 (Requires 2006+ riveted throttle body)
- Subaru STI 2006-2021
- Subaru WRX 2006-2007
- Subaru WRX 2008-2014 (must swap to a confirmed fit intake manifold)
- Subaru Forester XT 2004-2008
Important Install Notes:
- Intended for high HP builds.
- First consult with your tuner to ensure they will be able to make this TB setup work for you.
- You must swap over the motor from a Subaru DBW throttle body found on a 2006-21 STI, 2006-07 WRX, and 2004-08 Forester XT.
- Must have FMIC piping. (piping modification may be necessary)
- You will need a new transition coupler and clamp to fit the big bore TB (3.5") to your piping.
- You will need an aftermarket MAP sensor and relocate it to the intake manifold or a vacuum block.
- You will need to have your tuner adjust your tune for the big bore TB and aftermarket MAP sensor.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Big Bore 76mm Throttle Body Adapter
Applications: Subaru EJ Big Bore Intake Manifolds
Torque Solution Big Bore 76mm Throttle Body Adapter for Subaru EJ engines using a big bore intake manifold. Our adapter allows you to swap to a Toyota 76mm big bore throttle body which provides a 25% increase in size over OEM. Made from CNC billet aluminum that we anodize for corrosion resistance, provide o-ring gaskets for a leak free seal, and all the necessary hardware to complete the install.
- CNC'd 6061 Billet Aluminum
- Anodized For Added Corrosion Resistance
- O-ring Gaskets For A Leak Free Seal
- Limited Lifetime Warranty
Includes:
- Billet Spacer (1)
- Large O-ring (2)
- Small O-ring (4) (holds m6x20 screws in place on spacer)
- M6-1.0 x 20 Low Profile Zinc Socket Cap Bolt (4) (bolts spacer to IM)
- M6-1.0 x 50 Stainless Steel Socket Cap Bolt (4) (bolts the TB to the spacer)
- M6 Zinc Flat Washer (4) (For TB to spacer)
- Rivet (7) (to rivet the OEM TB motor to the big bore TB)
- M4 Nylock Nut (used as rivet spacer tool for center of motor cover near harness plug to TB)
Confirmed To Fit The Following Intake Manifolds:
- Process West Intake Manifolds
- Corsa Veloce Intake Manifolds
Confirmed to work the Big Bore TB Part #'s:
- Toyota 22030-0S010 / 220300S010
- Toyota 22030-0F010 / 220300F010
*May work with other Toyota TB's, but the 2 above are confirmed.
Fits:
- Subaru STI 2004-2005 (Requires 2006+ riveted throttle body)
- Subaru STI 2006-2021
- Subaru WRX 2006-2007
- Subaru WRX 2008-2014 (must swap to a confirmed fit intake manifold)
- Subaru Forester XT 2004-2008
Important Install Notes:
- Intended for high HP builds.
- First consult with your tuner to ensure they will be able to make this TB setup work for you.
- You must swap over the motor from a Subaru DBW throttle body found on a 2006-21 STI, 2006-07 WRX, and 2004-08 Forester XT. - Must have FMIC piping. (piping modification may be necessary) - You will need a new transition coupler and clamp to fit the big bore TB (3.5") to your piping. - You will need an aftermarket MAP sensor and relocate it to the intake manifold or a vacuum block. - You will need to have your tuner adjust your tune for the big bore TB and aftermarket MAP sensor. *Pics shown installed on Torque Solution Intake Manifold are for reference only.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Big Bore 76mm Throttle Body Adapter
Applications: Subaru EJ Big Bore Intake Manifolds
Torque Solution Big Bore 76mm Throttle Body Adapter for Subaru EJ engines using a big bore intake manifold. Our adapter allows you to swap to a Toyota 76mm big bore throttle body which provides a 25% increase in size over OEM. Made from CNC billet aluminum that we anodize for corrosion resistance, provide o-ring gaskets for a leak free seal, and all the necessary hardware to complete the install.
- CNC'd 6061 Billet Aluminum
- Anodized For Added Corrosion Resistance
- O-ring Gaskets For A Leak Free Seal
- Limited Lifetime Warranty
Includes:
- Billet Spacer (1)
- Large O-ring (2)
- Small O-ring (4) (holds m6x20 screws in place on spacer)
- M6-1.0 x 20 Low Profile Zinc Socket Cap Bolt (4) (bolts spacer to IM)
- M6-1.0 x 50 Stainless Steel Socket Cap Bolt (4) (bolts the TB to the spacer)
- M6 Zinc Flat Washer (4) (For TB to spacer)
- Rivet (7) (to rivet the OEM TB motor to the big bore TB)
- M4 Nylock Nut (used as rivet spacer tool for center of motor cover near harness plug to TB)
Confirmed To Fit The Following Intake Manifolds:
- Process West Intake Manifolds
- Corsa Veloce Intake Manifolds
Confirmed to work the Big Bore TB Part #'s:
- Toyota 22030-0S010 / 220300S010
- Toyota 22030-0F010 / 220300F010
*May work with other Toyota TB's, but the 2 above are confirmed.
Fits:
- Subaru STI 2004-2005 (Requires 2006+ riveted throttle body)
- Subaru STI 2006-2021
- Subaru WRX 2006-2007
- Subaru WRX 2008-2014 (must swap to a confirmed fit intake manifold)
- Subaru Forester XT 2004-2008
Important Install Notes:
- Intended for high HP builds.
- First consult with your tuner to ensure they will be able to make this TB setup work for you.
- You must swap over the motor from a Subaru DBW throttle body found on a 2006-21 STI, 2006-07 WRX, and 2004-08 Forester XT. - Must have FMIC piping. (piping modification may be necessary) - You will need a new transition coupler and clamp to fit the big bore TB (3.5") to your piping. - You will need an aftermarket MAP sensor and relocate it to the intake manifold or a vacuum block. - You will need to have your tuner adjust your tune for the big bore TB and aftermarket MAP sensor. *Pics shown installed on Torque Solution Intake Manifold are for reference only.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Big Bore 76mm Throttle Body Adapter
Applications: Subaru EJ Big Bore Intake Manifolds
Torque Solution Big Bore 76mm Throttle Body Adapter for Subaru EJ engines using a big bore intake manifold. Our adapter allows you to swap to a Toyota 76mm big bore throttle body which provides a 25% increase in size over OEM. Made from CNC billet aluminum that we anodize for corrosion resistance, provide o-ring gaskets for a leak free seal, and all the necessary hardware to complete the install.
- CNC'd 6061 Billet Aluminum
- Anodized For Added Corrosion Resistance
- O-ring Gaskets For A Leak Free Seal
- Limited Lifetime Warranty
Includes:
- Billet Spacer (1)
- Large O-ring (2)
- Small O-ring (4) (holds m6x20 screws in place on spacer)
- M6-1.0 x 20 Low Profile Zinc Socket Cap Bolt (4) (bolts spacer to IM)
- M6-1.0 x 50 Stainless Steel Socket Cap Bolt (4) (bolts the TB to the spacer)
- M6 Zinc Flat Washer (4) (For TB to spacer)
- Rivet (7) (to rivet the OEM TB motor to the big bore TB)
- M4 Nylock Nut (used as rivet spacer tool for center of motor cover near harness plug to TB)
Confirmed To Fit The Following Intake Manifolds:
- Process West Intake Manifolds
- Corsa Veloce Intake Manifolds
Confirmed to work the Big Bore TB Part #'s:
- Toyota 22030-0S010 / 220300S010
- Toyota 22030-0F010 / 220300F010
*May work with other Toyota TB's, but the 2 above are confirmed.
Fits:
- Subaru STI 2004-2005 (Requires 2006+ riveted throttle body)
- Subaru STI 2006-2021
- Subaru WRX 2006-2007
- Subaru WRX 2008-2014 (must swap to a confirmed fit intake manifold)
- Subaru Forester XT 2004-2008
Important Install Notes:
- Intended for high HP builds.
- First consult with your tuner to ensure they will be able to make this TB setup work for you.
- You must swap over the motor from a Subaru DBW throttle body found on a 2006-21 STI, 2006-07 WRX, and 2004-08 Forester XT.
- Must have FMIC piping. (piping modification may be necessary)
- You will need a new transition coupler and clamp to fit the big bore TB (3.5") to your piping.
- You will need an aftermarket MAP sensor and relocate it to the intake manifold or a vacuum block.
- You will need to have your tuner adjust your tune for the big bore TB and aftermarket MAP sensor.
*Pics shown installed on Torque Solution Intake Manifold are for reference only.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution High Flow Induction (Turbo Inlet) Hose
Applications: Ford Fiesta ST 2014+
Torque Solution High Flow Induction (Turbo Inlet) Hose for the Ford Fiesta ST. Our silicone inlet hose is much larger in size and smooths the air entering the turbo compared to the restrictive OEM corrugated inlet hose. Our inlet hose is made from 4 ply high grade silicone and wire reinforced to prevent collapsing under high pressure. We include a black anodized billet aluminum PCV fitting and silicone safe worm gear clamps.
- Smooths Airflow Entering Turbo
- Increases Air Flow
- 4 Ply Silicone w/ Wire Reinforcement
- Includes Silicone Friendly Stainless Steel Hose Clamps
- Direct Fitment
- Limited Lifetime Warranty
Includes:
- Black Silicone Wire Reinforced Hose (1)
- Billet Aluminum EVAP Fitting (1)
- Silicone Safe 70-90mm Stainless Steel Worm Gear Clamp (2)
Important Note: 2016-2019 models will require the EVAP fix.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Intake Manifold Spacer
Applications: Subaru WRX 2002-2014, STI 2004-2021
Torque Solution Intake Manifold Spacer for Subaru WRX 02-14, STI 04-21 is the perfect addition for those needing extra clearance under the intake manifold. These work great with the Torque Solution High Volume Intake Manifold to clear large silicone or hard inlets.
The spacer is CNC'd from billet aluminum and then clear anodized for corrosion resistance. It is 19mm (3/4") thick and features upper o-rings to seal between the spacer and the IM. You will only need to use gaskets between the TGV's and spacers. We provide extended stainless steel hardware to complete the install.
- CNC'd 6061 Billet Aluminum
- Clear Anodized For Added Corrosion Resistance
- Upper O-ring Gaskets
- Works With All TGV Types
- Provides Clearance For Large Turbo Inlets
- Increases Runner Length By 19mm (3/4")
- Limited Lifetime Warranty
Includes:
- Billet Spacer (2)
- O-ring (4)
- M6-1.0 x 45 Stainless Steel Socket Cap (12)
Fits:
- Subaru WRX 2002-2007
- Subaru WRX 2008-2014
- Subaru WRX STI 2004-2007
- Subaru WRX STI 2008-2014
- Subaru WRX STI 2015-2021
- Any turbo Subaru model that utilizes OEM or aftermarket TGV
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Aluminum Intake Pipe Kit
Applications: Toyota GR Supra / BMW G20 M340i and xDrive
Torque Solution Intake Pipe kit for Toyota GR Supra / BMW G20 M340i and xDrive is a simple and super-efficient upgrade to increase intake flow. Our intake pipe utilizes the stock airbox and replaces the OEM rubber corrugated hose and sound chamber. By using our intake pipe, you will have increased flow, improved sound, better turbo response and will look amazing as well. Simply pair it with a high flow panel filter of your choosing, as this combo has shown to provide the best stock turbo performance results.
- Aluminum Intake Pipe
- Black Wrinkle Powder Coated
- Silicone Safe Stainless Steel Worm Gear Clamps
- Retains OEM Airbox
- Limited Lifetime Warranty
Includes:
- Black Wrinkle Powder Coated Aluminum Intake Pipe (1)
- 3-Ply Silicone Coupler (1)
- 70-90MM Stainless Worm Gear Clamp (1)
- 80-100MM Stainless Worm Gear Clamp (1)
- OEM Spring Clip 90118-WA187 (1)
- OEM Gasket 17376-WAA06 (1)
Fits:
- Toyota GR Supra MKV 2020+
- BMW G20 M340i B58 3.0L
- BMW G20 M340i xDrive B58 3.0L
- BMW G29 Z4 B58
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Turbo Inlet Kit
Applications: VW/Audi Mk8 Golf GTI / A3 8Y / Mk3 TT / Q3 w/ 2.0 TSI EA888.4 using Garrett Turbo
Torque Solution Turbo Inlet Kit for VW/Audi Mk8 Golf GTI / A3 8Y / Mk3 TT / Q3 w/ 2.0 TSI EA888.4 GARRETT Turbo models. The OEM inlet and plastic corrugated hose are extremely restrictive being only 2.5" (62.5mm). Our kit drastically increases this to 3" (76mm)!! This is only able to be achieved by providing a complete inlet solution consisting of the 90 degree turbo elbow and silicone hose.
The 90 degree turbo elbow consists of a smooth tapered CNC billet aluminum turbo flange and welded aluminum piping to make the perfect bend and transition. We then anodized it black for durability and it simply looks amazing. The silicone inlet hose smooths the air entering the turbo by replacing the restrictive OEM plastic corrugated inlet hose. Our inlet hose is made from 4 ply high grade silicone. We include silicone safe hose clamps to ensure your hoses are not gouged and lasts a lifetime.
- Increases Inlet ID from 2.5 to 3"
- Smooths Airflow Entering Turbo
- Eliminates Power Robbing Plastic Corrugated Hose
- Smooth Taper Billet Aluminum Turbo Flange
- Black Anodized W/ Torque Solution Logo
- 4 Ply Silicone Hose
- Direct Fitment
- Easy Install
- Limited Lifetime Warranty
Includes:
- 90 Degree Turbo Inlet (1)
- O-ring Gasket (1)
- Silicone Inlet Hose (1)
- 70-90mm Silicone Safe Worm Gear Clamp (2) Fits:- VW Golf 8 GTI 2020+
- VW Tiguan II 2.0 TSI 245ps 2021+
- Audi A3 2.0 TSI 8Y 2020+
- Audi TT 45 TFSI 2.0 TSI 8S 2021+
- Audi Q3 45 TFSI 2.0 TSI 2018+
- Cupra Leon IV 245 TSI FW 2020+
- Cupra Formentor 245PS 2020+
- SEAT Tarraco FR Sport 2.0 TSI 245ps 2021+
- Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution HD Billet Turbo Inlet
Applications: Subaru WRX 2015-2021, Forester XT 2014-2018
Torque Solution HD Billet Turbo Inlet for Subaru WRX 2015-2021 and Forester XT 2014-2018. Our CNC'd billet aluminum inlet incorporates velocity grooves to speed up airflow entering the turbo, which transitions to a smooth high flow bore. Our inlet will not only look amazing but is a must have to prevent issues caused by the plastic OEM inlet. This is a perfect part to either repair or for preventative maintenance.
- CNC'd 6061 Billet Aluminum
- Black Anodized w/ Torque Solution Logo
- Incorporated Velocity Grooves
- Direct Fitment
- Limited Lifetime Warranty
Includes:
- Billet Aluminum Turbo Inlet (1)
- Black Silicone Bypass Valve Hose (1)
- 21-44mm Stainless Steel Worm Gear Clamp (2)
- M4 x 8 Stainless Steel Socket Cap Bolt (2)
- M4 x 16 Stainless Steel Socket Cap Bolt (2)
- M4 Stainless Steel Flat Washer (2)
Fits:
- Subaru WRX 2015-2021
- Subaru Forester XT 2014-2018
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Turbo Inlet Kit
Applications: VW/Audi Mk8 GTI Clubsport / Golf R / S3 8Y w/ EVO EA888 Gen.4 Engines using Continental Turbo
Torque Solution Turbo Inlet Kit for VW/Audi Mk8 GTI Clubsport / Golf R / S3 8Y w/ EVO EA888 Gen.4 Engines using Continental Turbo models. The OEM inlet and plastic corrugated hose are extremely restrictive being only 2.9" (74mm). Our kit drastically increases this to 3.3" (84mm)!! This is only able to be achieved by providing a complete inlet solution consisting of the turbo elbow and silicone hose.
The turbo elbow consists of a smooth tapered CNC billet aluminum turbo flange and welded aluminum piping to make the perfect bend and transition. We then anodized it black for durability and it simply looks amazing. The silicone inlet hose smooths the air entering the turbo by replacing the restrictive OEM plastic corrugated inlet hose. Our inlet hose is made from 4 ply high grade silicone. We include silicone safe hose clamps to ensure your hoses are not gouged and lasts a lifetime.
- Increases Inlet ID from 2.9 to 3.3"
- Smooths Airflow Entering Turbo
- Eliminates Power Robbing Plastic Corrugated Hose
- Smooth Taper Billet Aluminum Turbo Flange
- Black Anodized W/ Torque Solution Logo
- 4 Ply Silicone Hose
- Direct Fitment
- Easy Install
- Limited Lifetime Warranty
Includes:
- Aluminum Turbo Inlet (1)
- Billet Aluminum Adapter Tube (1)
- O-ring Gasket (1)
- Silicone Inlet Hose (1)
- 25-40mm Silicone Safe Worm Gear Clamp (1)
- 70-90mm Silicone Safe Worm Gear Clamp (1)
- 80-100mm Silicone Safe Worm Gear Clamp (1) Fits:- VW Golf 8 GTI Clubsport 2020+
- VW Golf 8 R 2020+
- VW Arteon R 2.0 TSI 320ps 2020+
- VW Tiguan II R 2.0 TSI 320ps 2021+
- Audi S3 8Y 2020+
- Cupra Leon IV 300 TSI FW 2020+
- Cupra Formentor 310PS 2020+
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Titanium Top Mount Charge Pipe
Applications: See Application List
Torque Solution Titanium Top Mount Charge Pipe for Subaru WRX 2022+ is a great addition to your engine bay. Our kit replaces the restrictive OEM plastic corrugated charge pipe with a beautifully crafted titanium charge pipe, CNC billet aluminum turbo adapter, 4-ply silicone hose couplers and silicone safe stainless steel worm gear clamps. Our turbo adapter converts the turbo outlet to 2.25" and our charge pipe is 2.25" at the turbo and smoothly transitions to 2.75" at the top mount intercooler. This results in overall improved flow, throttle response, efficiency, and of course increased horsepower all on the factory tune. That's right no tune is required, but of course greater gains can be had with a tune.
- Brushed Titanium Charge Pipe
- CNC Billet Aluminum Turbo Adapter
- 4-Ply Silicone Hose Couplers
- Silicone Safe Stainless Steel Worm Gear Clamps
- Limited Lifetime Warranty
Includes:
- Brushed Titanium Charge Pipe (1)
- Billet Aluminum Turbo Adapter (1)
- 2.25" Silicone Turbo Outlet Coupler (1)
- 2.5" Silicone TMIC Inlet Coupler (1)
- 50-70mm Silicone Safe Stainless Steel Worm Gear Clamp (2)
- 60-80mm Silicone Safe Stainless Steel Worm Gear Clamp (2)
Fits:
- Subaru WRX 2022+
- Subaru Ascent 2019-2023
- Subaru Outback XT 2020+
- Subaru Outback Wilderness 2022+
Important Note: Compatible with the OEM Top Mount Intercooler or Direct Replacement Top Mount Intercoolers only.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Titanium Top Mount Charge Pipe
Applications: See Application List
Torque Solution Titanium Top Mount Charge Pipe for Subaru WRX 2022+ is a great addition to your engine bay. Our kit replaces the restrictive OEM plastic corrugated charge pipe with a beautifully crafted titanium charge pipe, CNC billet aluminum turbo adapter, 4-ply silicone hose couplers and silicone safe stainless steel worm gear clamps. Our turbo adapter converts the turbo outlet to 2.25" and our charge pipe is 2.25" at the turbo and smoothly transitions to 2.75" at the top mount intercooler. This results in overall improved flow, throttle response, efficiency, and of course increased horsepower all on the factory tune. That's right no tune is required, but of course greater gains can be had with a tune.
- Burnt Blue Titanium Charge Pipe
- CNC Billet Aluminum Turbo Adapter
- 4-Ply Silicone Hose Couplers
- Silicone Safe Stainless Steel Worm Gear Clamps
- Limited Lifetime Warranty
Includes:
- Burnt Blue Titanium Charge Pipe (1)
- Billet Aluminum Turbo Adapter (1)
- 2.25" Silicone Turbo Outlet Coupler (1)
- 2.5" Silicone TMIC Inlet Coupler (1)
- 50-70mm Silicone Safe Stainless Steel Worm Gear Clamp (2)
- 60-80mm Silicone Safe Stainless Steel Worm Gear Clamp (2)
Fits:
- Subaru WRX 2022+
- Subaru Ascent 2019-2023
- Subaru Outback XT 2020+
- Subaru Outback Wilderness 2022+
Important Note: Compatible with the OEM Top Mount Intercooler or Direct Replacement Top Mount Intercoolers only.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Titanium Intake Pipe Kit
Applications: Subaru WRX 2022+
Torque Solution Titanium Intake Pipe (Post-MAF) Kit for Subaru WRX 2022+ is a great addition to your engine bay. Our kit replaces the restrictive OEM plastic corrugated pipe with a beautifully crafted 3" titanium Intake pipe, 3" 4-ply stainless steel wire reinforced silicone hoses and silicone safe stainless steel worm gear clamps. Our intake pipe kit works with the OEM airbox retaining the hydrocarbon trap which is needed to maintain federally mandated emissions!! This results in overall improved flow, throttle response, efficiency, and of course increased horsepower all on the factory tune. That's right no tune is required, but of course greater gains can be had with a tune. Pair this with your favorite drop in panel filter to make this the best intake kit for your VB WRX.
- Titanium Intake Pipe
- 4-Ply Stainless Steel Wire Reinforced Silicone Hoses
- Silicone Safe Stainless Steel Worm Gear Clamps
- Limited Lifetime Warranty
Includes:
- Titanium Intake Pipe (1)
- Silicone Turbo Inlet Hose (1)
- Silicone Airbox Outlet Hose (1)
- 70-90mm Silicone Safe Stainless Steel Worm Gear Clamp (3)
- 80-80mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
Fits:
- Subaru WRX 2022+
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Titanium Intake Pipe Kit
Applications: Subaru WRX 2022+
Torque Solution Titanium Intake Pipe (Post-MAF) Kit for Subaru WRX 2022+ is a great addition to your engine bay. Our kit replaces the restrictive OEM plastic corrugated pipe with a beautifully crafted 3" titanium Intake pipe, 3" 4-ply stainless steel wire reinforced silicone hoses and silicone safe stainless steel worm gear clamps. Our intake pipe kit works with the OEM airbox retaining the hydrocarbon trap which is needed to maintain federally mandated emissions!! This results in overall improved flow, throttle response, efficiency, and of course increased horsepower all on the factory tune. That's right no tune is required, but of course greater gains can be had with a tune. Pair this with your favorite drop in panel filter to make this the best intake kit for your VB WRX.
- Titanium Intake Pipe
- 4-Ply Stainless Steel Wire Reinforced Silicone Hoses
- Silicone Safe Stainless Steel Worm Gear Clamps
- Limited Lifetime Warranty
Includes:
- Titanium Intake Pipe (1)
- Silicone Turbo Inlet Hose (1)
- Silicone Airbox Outlet Hose (1)
- 70-90mm Silicone Safe Stainless Steel Worm Gear Clamp (3)
- 80-80mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
Fits:
- Subaru WRX 2022+
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Titanium Top Mount Charge Pipe
Applications: See Application List
Torque Solution Titanium Top Mount Charge Pipe for Subaru WRX 2022+ is a great addition to your engine bay. Our kit replaces the restrictive OEM plastic corrugated charge pipe with a beautifully crafted titanium charge pipe, CNC billet aluminum turbo adapter, 4-ply silicone hose couplers and silicone safe stainless steel worm gear clamps. Our turbo adapter converts the turbo outlet to 2.25" and our charge pipe is 2.25" at the turbo and smoothly transitions to 2.75" at the top mount intercooler. This results in overall improved flow, throttle response, efficiency, and of course increased horsepower all on the factory tune. That's right no tune is required, but of course greater gains can be had with a tune.
- Burnt Blue Titanium Charge Pipe
- CNC Billet Aluminum Turbo Adapter
- 4-Ply Silicone Hose Couplers
- Silicone Safe Stainless Steel Worm Gear Clamps
- Limited Lifetime Warranty
Includes:
- Burnt Blue Titanium Charge Pipe (1)
- Billet Aluminum Turbo Adapter (1)
- 2.25" Silicone Turbo Outlet Coupler (1)
- 2.5" Silicone TMIC Inlet Coupler (1)
- 50-70mm Silicone Safe Stainless Steel Worm Gear Clamp (2)
- 60-80mm Silicone Safe Stainless Steel Worm Gear Clamp (2)
Fits:
- Subaru WRX 2022+
- Subaru Ascent 2019-2023
- Subaru Outback XT 2020+
- Subaru Outback Wilderness 2022+
Important Note: Compatible with the OEM Top Mount Intercooler or Direct Replacement Top Mount Intercoolers only.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Titanium Top Mount Charge Pipe
Applications: See Application List
Torque Solution Titanium Top Mount Charge Pipe for Subaru WRX 2022+ is a great addition to your engine bay. Our kit replaces the restrictive OEM plastic corrugated charge pipe with a beautifully crafted titanium charge pipe, CNC billet aluminum turbo adapter, 4-ply silicone hose couplers and silicone safe stainless steel worm gear clamps. Our turbo adapter converts the turbo outlet to 2.25" and our charge pipe is 2.25" at the turbo and smoothly transitions to 2.75" at the top mount intercooler. This results in overall improved flow, throttle response, efficiency, and of course increased horsepower all on the factory tune. That's right no tune is required, but of course greater gains can be had with a tune.
- Titanium Charge Pipe
- CNC Billet Aluminum Turbo Adapter
- 4-Ply Silicone Hose Couplers
- Silicone Safe Stainless Steel Worm Gear Clamps
- Limited Lifetime Warranty
Includes:
- Titanium Charge Pipe (1)
- Billet Aluminum Turbo Adapter (1)
- 2.25" Silicone Turbo Outlet Coupler (1)
- 2.5" Silicone TMIC Inlet Coupler (1)
- 50-70mm Silicone Safe Stainless Steel Worm Gear Clamp (2)
- 60-80mm Silicone Safe Stainless Steel Worm Gear Clamp (2)
Fits:
- Subaru WRX 2022+
- Subaru Ascent 2019-2023
- Subaru Outback XT 2020+
- Subaru Outback Wilderness 2022+
Important Note: Compatible with the OEM Top Mount Intercooler or Direct Replacement Top Mount Intercoolers only.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Titanium Intake Pipe Kit
Applications: Subaru WRX 2022+
Torque Solution Titanium Intake Pipe (Post-MAF) Kit for Subaru WRX 2022+ is a great addition to your engine bay. Our kit replaces the restrictive OEM plastic corrugated pipe with a beautifully crafted 3" titanium Intake pipe, 3" 4-ply stainless steel wire reinforced silicone hoses and silicone safe stainless steel worm gear clamps. Our intake pipe kit works with the OEM airbox retaining the hydrocarbon trap which is needed to maintain federally mandated emissions!! This results in overall improved flow, throttle response, efficiency, and of course increased horsepower all on the factory tune. That's right no tune is required, but of course greater gains can be had with a tune. Pair this with your favorite drop in panel filter to make this the best intake kit for your VB WRX.
- Titanium Intake Pipe
- 4-Ply Stainless Steel Wire Reinforced Silicone Hoses
- Silicone Safe Stainless Steel Worm Gear Clamps
- Limited Lifetime Warranty
Includes:
- Titanium Intake Pipe (1)
- Silicone Turbo Inlet Hose (1)
- Silicone Airbox Outlet Hose (1)
- 70-90mm Silicone Safe Stainless Steel Worm Gear Clamp (3)
- 80-80mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
Fits:
- Subaru WRX 2022+
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Titanium Intake Pipe Kit
Applications: Subaru WRX 2022+
Torque Solution Titanium Intake Pipe (Post-MAF) Kit for Subaru WRX 2022+ is a great addition to your engine bay. Our kit replaces the restrictive OEM plastic corrugated pipe with a beautifully crafted 3" titanium Intake pipe, 3" 4-ply stainless steel wire reinforced silicone hoses and silicone safe stainless steel worm gear clamps. Our intake pipe kit works with the OEM airbox retaining the hydrocarbon trap which is needed to maintain federally mandated emissions!! This results in overall improved flow, throttle response, efficiency, and of course increased horsepower all on the factory tune. That's right no tune is required, but of course greater gains can be had with a tune. Pair this with your favorite drop in panel filter to make this the best intake kit for your VB WRX.
- Titanium Intake Pipe
- 4-Ply Stainless Steel Wire Reinforced Silicone Hoses
- Silicone Safe Stainless Steel Worm Gear Clamps
- Limited Lifetime Warranty
Includes:
- Titanium Intake Pipe (1)
- Silicone Turbo Inlet Hose (1)
- Silicone Airbox Outlet Hose (1)
- 70-90mm Silicone Safe Stainless Steel Worm Gear Clamp (3)
- 80-80mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
Fits:
- Subaru WRX 2022+
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Solution Titanium Top Mount Charge Pipe
Applications: Subaru WRX 15-21
Torque Solution Titanium Top Mount Charge Pipe for Subaru WRX 2015-2021 is a great addition to your engine bay. Our kit replaces the restrictive OEM plastic corrugated charge pipe with a beautifully crafted titanium charge pipe, CNC billet aluminum turbo adapter, 4-ply silicone hose couplers and silicone safe stainless steel worm gear clamps. Our turbo adapter converts the turbo outlet to a 2.25" clamp on outlet and custom molded turbo / bypass valve adapter coupler help simplify the install. Our charge pipe is 2.25" at the turbo and smoothly transitions to 2.75" at the top mount intercooler. This results in overall improved flow, throttle response, efficiency, and of course increased horsepower all on the factory tune. That's right no tune is required, but of course greater gains can be had with a tune.
- Titanium Charge Pipe
- CNC Billet Aluminum Turbo Adapter
- 4-Ply Silicone Hose Couplers
- Silicone Safe Stainless Steel Worm Gear Clamps
- Limited Lifetime Warranty
Includes:
- Titanium Charge Pipe (1)
- Billet Aluminum Turbo Adapter (1)
- Silicone Turbo / Bypass Valve Adapter Coupler (1)
- 2.75" Silicone TMIC Inlet Coupler (1)
- 60-80mm Silicone Safe Stainless Steel Worm Gear Clamp (2)
- 50-70mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
- 40-60mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
- 30-45mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
- 23-35mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
- M8 x 20 Stainless Socket Cap Screw (2)
Fits:
- Subaru WRX 2015-2021 (FA20DIT)
Important Note: Compatible with the OEM Top Mount Intercooler or Direct Replacement Top Mount Intercoolers only.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Titanium Top Mount Charge Pipe
Applications: Subaru WRX 15-21
Torque Solution Titanium Top Mount Charge Pipe for Subaru WRX 2015-2021 is a great addition to your engine bay. Our kit replaces the restrictive OEM plastic corrugated charge pipe with a beautifully crafted titanium charge pipe, CNC billet aluminum turbo adapter, 4-ply silicone hose couplers and silicone safe stainless steel worm gear clamps. Our turbo adapter converts the turbo outlet to a 2.25" clamp on outlet and custom molded turbo / bypass valve adapter coupler help simplify the install. Our charge pipe is 2.25" at the turbo and smoothly transitions to 2.75" at the top mount intercooler. This results in overall improved flow, throttle response, efficiency, and of course increased horsepower all on the factory tune. That's right no tune is required, but of course greater gains can be had with a tune.
- Titanium Charge Pipe
- CNC Billet Aluminum Turbo Adapter
- 4-Ply Silicone Hose Couplers
- Silicone Safe Stainless Steel Worm Gear Clamps
- Limited Lifetime Warranty
Includes:
- Titanium Charge Pipe (1)
- Billet Aluminum Turbo Adapter (1)
- Silicone Turbo / Bypass Valve Adapter Coupler (1)
- 2.75" Silicone TMIC Inlet Coupler (1)
- 60-80mm Silicone Safe Stainless Steel Worm Gear Clamp (2)
- 50-70mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
- 40-60mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
- 30-45mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
- 23-35mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
- M8 x 20 Stainless Socket Cap Screw (2)
Fits:
- Subaru WRX 2015-2021 (FA20DIT)
Important Note: Compatible with the OEM Top Mount Intercooler or Direct Replacement Top Mount Intercoolers only.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
Torque Solution Titanium Top Mount Charge Pipe
Applications: Subaru WRX 15-21
Torque Solution Titanium Top Mount Charge Pipe for Subaru WRX 2015-2021 is a great addition to your engine bay. Our kit replaces the restrictive OEM plastic corrugated charge pipe with a beautifully crafted titanium charge pipe, CNC billet aluminum turbo adapter, 4-ply silicone hose couplers and silicone safe stainless steel worm gear clamps. Our turbo adapter converts the turbo outlet to a 2.25" clamp on outlet and custom molded turbo / bypass valve adapter coupler help simplify the install. Our charge pipe is 2.25" at the turbo and smoothly transitions to 2.75" at the top mount intercooler. This results in overall improved flow, throttle response, efficiency, and of course increased horsepower all on the factory tune. That's right no tune is required, but of course greater gains can be had with a tune.
- Titanium Charge Pipe
- CNC Billet Aluminum Turbo Adapter
- 4-Ply Silicone Hose Couplers
- Silicone Safe Stainless Steel Worm Gear Clamps
- Limited Lifetime Warranty
Includes:
- Titanium Charge Pipe (1)
- Billet Aluminum Turbo Adapter (1)
- Silicone Turbo / Bypass Valve Adapter Coupler (1)
- 2.75" Silicone TMIC Inlet Coupler (1)
- 60-80mm Silicone Safe Stainless Steel Worm Gear Clamp (2)
- 50-70mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
- 40-60mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
- 30-45mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
- 23-35mm Silicone Safe Stainless Steel Worm Gear Clamp (1)
- M8 x 20 Stainless Socket Cap Screw (2)
Fits:
- Subaru WRX 2015-2021 (FA20DIT)
Important Note: Compatible with the OEM Top Mount Intercooler or Direct Replacement Top Mount Intercoolers only.
PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)
|
|
|
