Home >

Torque Solution HD Hard Turbo Inlet: Subaru WRX 02-07, STI 04-21 - Cast Aluminum - 84mm / 3.3" FP Inlet
Torque Solution HD Hard Turbo Inlet: Subaru WRX 02-07, STI 04-21 - Cast Aluminum - 84mm / 3.3" FP Inlet
Carbon Fiber version is displayed.
  
Alternative Views:
MSRP$399.99
Our Price:$359.99
You save $40.00!


Product Code: TS-SU-881-84

CARB/EO: This product is not CARB Legal and not for use in California.

Qty:  
Description
 
Torque Solution HD Hard Turbo Inlet Pipe - Cast Aluminum
Applications: Subaru WRX 2002-2007, STI 2004-2021

Torque Solution Cast Aluminum HD Hard Turbo Inlet Pipe for the Subaru EJ Engines that utilize a STI or similar intake manifold. Our HD inlet is much larger in size and smooths the air flow entering the turbo compared to the restrictive OEM corrugated inlet hose. We include all the necessary hardware needed to complete the install whether installing on a car in standard recirculated configuration or a full out build on speed density. Simply choose the configuration based on your turbo inlet size which they are available in 2.4" (OEM), 3" (PTE, Blouch, Garrett) or 84mm/3.3" (FP).

- Cast Aluminum / Black Anodized
- Smooths and Increases Airflow Entering Turbo
- Eliminates failure prone corrugated rubber hose
- 4-ply Silicone Couplers
- Includes Silicone Friendly Stainless Steel Hose Clamps
- Direct Fitment
- Includes All Necessary Hardware To Install
- Able to be installed Recirculated or as Speed Density
- Limited Lifetime Warranty

Includes:
- Cast Aluminum HD Turbo Inlet (1)
- Silicone Turbo Coupler of your choosing (OEM, 3" or 84mm) (1)
- 1/4 Stainless NPT Plug (1)
- Billet Aluminum 1/4 NPT to 3/8 Straight Barb Fitting (1)
- Billet Aluminum 1/4 NPT to 3/8 90 Degree Barb Fitting (1)
- Billet Aluminum 3/8 NPT to 5/8 90 Degree Barb Fitting (1)
- Billet Aluminum Inlet Recirculation Adapter (1)
- Billet Aluminum Inlet Speed Density Cap (1)
- 80-100mm Wide Width Silicone Safe Worm Gear Clamp (1)
- 70-90mm Wide Width Silicone Safe Worm Gear Clamp (1)
- 70-90mm Standard Width Silicone Safe Worm Gear Clamp (2)
- 25-40mm Standard Width Silicone Safe Worm Gear Clamp (1)

Install Notes:
1. Coupler will need trimming on both ends to fit. We recommend trimming in approx. 1/8" increments using a worm gear clamp as a guide and a fresh sharp blade. Please be careful and use caution when performing this task.
2. We highly recommend using masking tape on the inlet to prevent scratching till you have the coupler perfectly trimmed.
3. Install all fittings with a ptfe tape.



PROPOSITION 65

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.

WARNING: Cancer and Reproductive Harm. (http://www.p65warnings.ca.gov)


Share your knowledge of this product with other customers... Be the first to write a review


Torque Solution Boost Leak Tester: For 2" Turbo Inlet $59.99