Torque Solution Adjustable Rear Upper Traction ArmsApplications: Tesla Model 3 2017+ / Model Y 2020+
Torque Solution Adjustable Rear Upper Traction Arms Kit is designed to allow you to dial in and fine tune the rear bump steer and anti-squat characteristics of your Model 3 2017+ / Model Y 2020+. Our arms will reduce bushing deflection caused by the OEM bushings with the use of the PTFE line FK rods ends resulting in better response, stability and reducing wheel hop.
We chose to use 7075 billet aluminum for its increased strength over 6061 due to the weight and low center of gravity of the Model 3/Y. Black anodized for corrosion resistance and finished off with blue titanium hardware. You can rest assured knowing these are quality arms that will last a lifetime.
2 links total Included in each package. Requires NO modification to chassis and is a direct bolt on replacement part. Can be used on daily driven street cars and is highly recommended for Street or Track setups.
- CNC 7075 Billet Aluminum
- Black Anodized w/ Torque Solution Logo
- PTFE Lined FK Rod Ends
- Limited Lifetime Warranty
Includes:
- Billet Aluminum Arm Assembled w/ FK Rod End (2)
- Billet Aluminum Rod End Spacer (4)
Fits:
- Tesla Model 3 2017+ RWD Base, RWD Long-Range, AWD Long-Range, AWD Performance
- Tesla Model Y 2020+ RWD Base, RWD Long-Range, AWD Long-Range, AWD Performance
**Important Note: We recommend professional installation and that an alignment is performed after installing this kit.
Install Notes:
- Torque OEM bolts to 74 ft. lbs. (100 N/M)
- Torque the Titanium M5 Allen Bolts to 150 in. lbs. After about 100 miles double check all bolts are still properly torqued.
- Do not exceed 0.625" of exposed threads on the clevis or rod end side of the arms.
**Rod ends are a wear and tear item not covered by warranty. 